汽车前置保险杠材料造型与安全性比较研究

doi:10.11896/cldb.22010019

Abstract
Figure/Table
References
Related Citation (2)

Download:

Full Text ( PDF ) (4585KB)
Export: BibTeX | EndNote (RIS)

Abstract At present, the passenger car market is developing rapidly, and the number of cars also grows accordingly. With the convenience to travel, better energy saving, environmental protection and safety have also been made a new issue in the development of modern automobile.The lightweight design of automobile bumper, an effective way to reduce environmental pollution and improve the energy saving and environmental protection of products, has already been an important automobile research direction for sustainable development. This paper analyzes material use, material processing method and bumper modeling design, and explains the relation between the lightweight of the bumper and the three factors. Advance of the processing method affects the bumper modeling design to a large extent, while the lightweight bumper modeling design can directly influence the safety and energy saving during low-speed driving. From the traditional suppression and injection processing, to the perso-nalized customization of digital 3D printing incremental technology and the application of small batch production, technology development accele-rates the innovation of products, so as to improve the harmonious unity of the vehicle shape.The molding technology of carbon fiber composite material is an effective way to realize the automobile lightweight, which not only improves the vehicle's ability to absorb and mitigate external impact, but also plays a guiding role in the automobile appearance design and transformation in the future.

Key words： automobile bumper lightweight material modeling design simulation calculation

Received: 25 September 2202 Published: 25 September 2022 Online: 2022-09-26

CLC number:

TB3

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WU Guorong
	CHEN Xuhui
	HUANG Shiwen

Cite this article:

WU Guorong,CHEN Xuhui,HUANG Shiwen. Comparative Study on Material Modeling and Safety of Automobile Front Bumper[J]. Materials Reports, 2022, 36(18): 22010019-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22010019 OR http://www.mater-rep.com/EN/Y2022/V36/I18/22010019

1 Jin H, Jeongsoo Y, Okubo K. Waste management & research , ISWA, Japan, 2021.
2 Xiong K, Yang Q L, Hu L.Materials Reports, 2022,36(5), 20110059(in Chinese).
熊康, 杨啟梁, 胡溧.材料导报, 2022,36(5),20110059.
3 Li R, Zhao J H. China Science and Technology Information, 2021(2),70(in Chinese).
李润, 赵吉虎. 中国科技信息, 2021(2),70.
4 Xu W, Li G Y, Zheng G. Mechanical Design and Manufacturing, 2020(8),168(in Chinese).
徐威, 李光耀, 郑刚. 机械设计与制造, 2020(8),168.
5 Zhan Q M, Huang H F, Pang Z. Equipment Manufacturing Technology, 2020(9), 202(in Chinese).
詹强民, 黄华芬, 庞志. 装备制造技术, 2020(9), 202.
6 Zhou Y, He L, Zhu K P, et al. Chemical New Materials, 2008(7), 48(in Chinese).
周义, 何力, 朱坤鹏,等. 化工新型材料, 2008(7), 48.
7 Ji T Y. Research on lightweight design and collision performance of precision cast aluminum bumper. Ph.D. Thesis, Hefei University of technology, China, 2019(in Chinese).
季天宇. 精密铸铝保险杠轻量化设计及碰撞性能研究. 博士学位论文, 合肥工业大学, 2019.
8 Wang Z J, He Z, Lin G Y,et al. Journal of Plastic Engineering, 2018, 25(1), 269(in Chinese).
王镇江,何造,林广谊,等. 塑性工程学报, 2018, 25(1), 269.
9 Zhang Y, Liu X F, Yan S T, et al. Journal of Functional Materials, 2020, 51(11), 11103(in Chinese).
张颖,刘晓峰,阎述韬,等. 功能材料, 2020, 51(11), 11103.
10 Zhang L, Li S G, Wang H. Mechanical Design, 2021, 38(9), 126(in Chinese).
张磊, 李胜刚, 王杭. 机械设计, 2021, 38(9), 126.
11 Wang H H, Chen C P. Symmetry, 2020, 12(12), 2074.
12 Yao X, Yu X J.Packaging Engineering,2020,41(2),154(in Chinese).
姚湘,余祥杰.包装工程, 2020, 41(2), 154.
13 Zhang X F. Research and design of automobile modeling style. Ph.D. Thesis, Tsinghua University, China, 2019(in Chinese).
张旭峰. 汽车造型风格研究与设计. 博士学位论文, 清华大学, 2019.
14 Al-Zuheri A, Rashad H, Al-Maliki A A, et al. Engineering, 2018, 10(1), 7.
15 Wang B Z, Zhang F M, Lu C G, et al. Mechanical Design and Manufacturing, 2018(2), 131(in Chinese).
王宝中, 张富明, 路春光, 等.机械设计与制造, 2018(2), 131.
16 Aili Z, Long J.Materials Science and Engineering, 2017, 234(1), 012020.
17 Tian Y Q, Li W, Zheng X P, et al. Materials Reports A: Reviw Papers, 2019, 33(7), 1109(in Chinese).
田亚强, 黎旺, 郑小平, 等. 材料导报:综述篇,2019,33(7),1109.
18 Deng Z, Yu Y, Liu L Q, et al. Composite Science and Engineering, 2021(9), 74(in Chinese).
邓忠,余音,刘龙权,等.复合材料科学与工程, 2021(9), 74.
19 Yin L, Huang L Q, Li M Z.Packaging Engineering, 2021, 42(20), 159(in Chinese).
尹磊,黄黎清,李明珠.包装工程, 2021, 42(20), 159.
20 Al Hadithi Abdulkader Ismail, Abbas Mustafa Ahmed. European Journal of Environmental and Civil Engineering, 2021, 25(3), 516.
21 Liu W D, Bo X S, He C.Materials Reports, 2019, 33(Z2), 468(in Chinese).
刘伟东,薄旭盛,何成.材料导报, 2019, 33(Z2), 468.
22 Wang Z, Xu Z, Huang L Y.Surface Technology, 2019, 48(6), 338(in Chinese).
王增, 徐震, 黄凌宇. 表面技术, 2019, 48(6), 338.
23 Teng D.Material Protection, 2020, 53(9), 176(in Chinese).
滕丹. 材料保护, 2020, 53(9), 176.
24 Fredrickson J W.The Academy of Management Journal, 1984, 27(3), 445.
25 He W L, Zhang Q F, Sui L M, et al. Material Protection, 2021, 54(3), 113(in Chinese).
何伟丽, 张庆丰, 睢利铭, 等. 材料保护, 2021, 54(3), 113.
26 Liu Y Q.Rubber and Plastic Technology and Equipment, 2021, 47(22), 32(in Chinese).
刘玉强. 橡塑技术与装备, 2021, 47(22), 32.
27 Wu G R,Yang M L. Product modeling design (2nd edition),Wuhan University of Technology Press, China, 2010, pp.3(in Chinese).
吴国荣, 杨明朗. 产品造型设计(第二版), 武汉理工大学出版社, 2010, pp.3.
28 Zhang X H.Plastic Science and Technology, 2016, 44(5), 87(in Chinese).
张宪辉. 塑料科技, 2016, 44(5), 87.
29 Wang Y J, Dong H S, Zhang D S, et al. Journal of Chongqing University of Technology (Natural Science), 2022, 36(7), 86(in Chinese).
汪永嘉, 董红顺, 张代胜,等.重庆理工大学学报(自然科学), 2022, 36(7), 86.
30 Cao J C, Huang L L, Lu X Y, et al. Science, Technology and Enginee-ring, 2021, 21(2), 664(in Chinese).
曹俊超, 黄丽丽, 鹿晓阳,等.科学技术与工程, 2021, 21(2), 664.
31 Jiang X L R, Gu H M, Xiao K, et al. In: The 14th International Forum of Automotive Traffic Safety. Changsha, China, 2017, pp.187(in Chinese).
蒋熊力忍, 顾海明, 肖克. 第十四届国际汽车交通安全论坛. 长沙, 2017, pp.187.
32 Zhang Z F, Li X, Xu Z M, et al. Journal of Chongqing University, 2016, 39(3), 21(in Chinese).
张志飞, 李勋, 徐中明, 等.重庆大学学报, 2016, 39(3), 21.
33 Wang C L, Hu H, Qiao W Y, et al. Plastics Industry, 2021, 49(10), 42(in Chinese).
王晨蕾, 胡浩, 乔雯钰,等. 塑料工业, 2021, 49(10), 42.
34 Qin R M, Zhu B, Qiao K, et al. Journal of Engineering Science, 2021, 43(10), 1346(in Chinese).
秦溶蔓, 朱波, 乔琨, 等. 工程科学学报, 2021, 43(10), 1346.
35 Delporte Y H, Ghasemnejad H. Open Journal of Composite Materials, 2020, 11(1), 1.