陶瓷颗粒增强Zr基非晶合金复合材料高温变形行为研究

doi:10.11896/cldb.21110013

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (11567KB)
Export: BibTeX | EndNote (RIS)

Abstract The problem of room-temperature brittleness of metallic glass can be effectively solved by adding a second phase to prepare metallic glass matrix composites. However, the effect of the introduction of a second phase on the high-temperature deformation behavior of the amorphous matrix is not clear. In this study, two different ceramic particles, Al₂O₃ and Si₃N₄, were added to Zr₅₅Cu₃₀Al₁₀Ni₅ metallic glass. A series of ceramic-particle reinforced Zr-based metallic glass matrix composites with different volume fractions were prepared using spark plasma sintering. The high-temperature deformation behavior was systematically studied through the high-temperature compression tests and the establishment of a multi-particle random distribution model for numerical simulation. The results show that both composites show strain hardening after stress overshoot at 421 ℃. Al₂O₃-reinforced composites show strain hardening after yield at 441 ℃. For Si₃N₄-reinforced composites, when the volume fraction of the second phase is less than 25%, it show strain hardening after yield. When the volume fraction of the second phase is greater than 25%, the material shows strain hardening after stress overshoot. The difference in high-temperature deformation behavior between the two metallic glass matrix composites is related to the morphology of the reinforcing phase and the uneven distribution of reinforcing phase due to the agglomeration behavior.

Key words： metallic glass matrix composites thermoplastic forming high-temperature deformation behavior numerical simulation

Published: 10 January 2023 Online: 2023-01-31

CLC number:

TG139.8

Fund:National Natural Science Foundation of China (51601063) and the Fundamental Research Funds for the Central Universities (2018KFYRCPT001).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YU Guoqing
	XU Yongkang
	WANG Dongliang
	NIU Yong
	SI Mingda
	ZHANG Mao
	GONG Pan
	WANG Xinyun

Cite this article:

YU Guoqing,XU Yongkang,WANG Dongliang, et al. High-temperature Deformation Behavior of Zr-based Metallic Glass Matrix Composites Reinforced by Ceramic Particle[J]. Materials Reports, 2023, 37(1): 21110013-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21110013 OR http://www.mater-rep.com/EN/Y2023/V37/I1/21110013

1 Wang F L, Yang Y J, Lyu J W, et al. Special-cast and Non-ferrous Alloys, 2020, 40(3), 253(in Chinese).
王飞龙, 杨玉婧, 吕敬旺, 等. 特种铸造及有色合金, 2020, 40(3), 253.
2 Wang W H. Progress in Materials Science, 2012, 57(3), 487.
3 Zheng Y F, Gu X N, Witte F. Materials Science and Engineering R: Reports, 2014, 77, 1.
4 Rajan S T, Arockiarajan A. Journal of Alloys and Compounds, 2021, 876, 159939.
5 Ding H P, Gong P, Yao K F, et al. Materials Reports A:Review Papers, 2020, 34(2), 133(in Chinese).
丁华平, 龚攀, 姚可夫, 等. 材料导报:综述篇, 2020, 34(2), 133.
6 Gong P, Yu G Q, Ding H P, et al. Forging and Stamping Technology, 2021, 46(9), 43(in Chinese).
龚攀, 余国卿, 丁华平, 等. 锻压技术, 2021, 46(9), 43.
7 Khan M M, Nemati A, Rahman Z U, et al. Critical Reviews in Solid State and Materials Sciences, 2018, 43(3), 233.
8 Dong J, Wang Y T, Hu J, et al. Chinese Journal of Theoretical and Applied Mechanics, 2020, 52(2), 379(in Chinese).
董杰, 王雨田, 胡晶, 等. 力学学报, 2020, 52(2), 379.
9 Qiao J, Jia H, Liaw P K. Materials Science and Engineering R: Reports, 2016, 100, 1.
10 Ding H P, Zhao Z K, Jin J S, et al. Journal of Alloys and Compounds, 2021, 850, 156724.
11 Liu J M, Yuan X G, Zhang H F, et al. Journal of Shenyang University of Technology, 2010, 32(2), 157(in Chinese).
刘金民, 袁晓光, 张海峰, 等. 沈阳工业大学学报, 2010, 32(2), 157.
12 Cao X M, Jin P, Xu Y C, et al. Acta Materiae Compositae Sinica, 2022, 39(4), 1777(in Chinese).
曹小明, 金鹏, 徐奕辰, 等. 复合材料学报, 2022, 39(4), 1777.
13 Zhang L, Narayan R L, Sun B A, et al. Physical Review Letters, 2020, 125, 0555015.
14 Liu X, Chen Y, Dai L. Scientia Sinica-physica Mechanica & Astronomica, 2020, 50, 0670066.
15 Ma J, Yang C, Gong F, et al. Acta Physica Sinica, 2017, 66(17), 251(in Chinese).
马将, 杨灿, 龚峰, 等. 物理学报, 2017, 66(17), 251.
16 Cui J, Li J, Wang J, et al. Materials & Design, 2016, 90, 595.
17 Wu L, Zhu Z, Liu D, et al. Journal of Materials Science & Technology, 2020, 37, 64.
18 Hong S H, Kim J T, Mun S C, et al. Intermetallics, 2017, 91, 90.
19 Ma D Q, Yuan S Q, Ma X Z, et al. Journal of Alloys and Compounds, 2018, 768, 415.
20 Li J B, Zhang H Z, Jang J S C, et al. Journal of Alloys and Compounds, 2012, 5361, S165.
21 Singh P S, Narayan R L, Sen I, et al. Materials Science and Engineering: A, 2012, 534, 476.
22 Wang Y S, Linghu R K, Liu Y Y, et al. Journal of Alloys and Compounds, 2018, 751, 391.
23 Ma Y F. Study of tungsten particle reinforced Zr based bulk metallic glass composites preparation and properties. Master’s Thesis, Huazhong University of Science and Technology, China, 2019(in Chinese).
马云飞. 钨颗粒增强锆基非晶合金复合材料的制备与性能研究. 硕士学位论文, 华中科技大学, 2019.
24 Xu Y K, Ding H P, Chen J, et al. Journal of Netshape Forming Engineering, 2020, 12(6), 77(in Chinese).
许永康, 丁华平, 陈骥, 等. 精密成形工程, 2020, 12(6), 77.
25 Wang Y S, Linghu R K, Zhang W, et al. Journal of Alloys and Compounds, 2020, 844, 155761.
26 Chen Q, Liu L, Chan K C. Science in China Series G: Physics, Mechanics and Astronomy, 2008, 51(4), 349.
27 Chen G, Hao Y, Chen X, et al. International Journal of Impact Engineering, 2017, 106, 110.
28 Ma G, Zhu Z, Wang Z, et al. Journal of Materials Science & Technology, 2015, 31(9), 941.
29 Bai J, Kou H C, Wang J, et al. Materials Letters, 2014, 117, 228.
30 Shin D W, Min H, Lee J K. Korean Journal of Metals and Materials, 2021, 59(5), 281.
31 Ding H P, Zhao Z K, Jin J S, et al. Journal of Alloys and Compounds, 2021, 850, 156724.

[1]	WANG Zhao, ZHANG Xinhu, WANG Zhaohao, WANG Guan, XI Yongbo, ZHENG Wei, DING Yang, ZHU Libing, DENG Yongjun, FU Xiangang, YUN Di, LIU Wenbo. Performance Analysis of UO₂ Fuel Based on MOOSE Platform[J]. Materials Reports, 2022, 36(7): 21040019-7.