铅冷快堆结构材料耐蚀涂层技术研究概述

doi:10.11896/cldb.21090168

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (8838KB)
Export: BibTeX | EndNote (RIS)

Abstract Lead-cooled fast reactor is a fast neutron reactor cooled using liquid lead or lead-bismuth alloy. As one of the six main reactors of fourth-gene-ration, lead cooling reactor has the characters of high load tracking, high inherent safety, high power density and long feeding cycle. It meets the requirements of safety, economy, sustainability and nuclear nonproliferation of the fourth-generation reactors. However, lead or lead bismuth alloy are corrosive media for structural material, so complex oxygen control technology or excellent corrosion-resistant materials must be used to ensure the long-term safe operation of the reactor. At present, silicon-reinforced heat-resistant steel, for example Russian cladding materials of EP823 (16Cr12MoWSiVNbMn), steam generator materials of EP302M(10Cr15Ni9Si3Nb), aluminum reinforced ferrite martenite steel and coating preparation technology are used to solve the corrosion problem of liquid lead / lead / bismuth on structural materials. The paper mainly summarizes the research status of typical corrosion-resistant coating technology, and describes the coating prospects in the future.

Key words： lead-bismuth cooling structure material oxidation corrosion-resistant coating

Published: Online: 2022-12-09

CLC number:

TB37

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIANG Na
	YAO Cunfeng
	LONG Bin
	FU Xiaogang

Cite this article:

LIANG Na,YAO Cunfeng,LONG Bin, et al. Overview of Corrosion-resistant Coating Technology for Lead-cooled Fast Reactor Structure Materials[J]. Materials Reports, 2022, 36(23): 21090168-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21090168 OR http://www.mater-rep.com/EN/Y2022/V36/I23/21090168

1 Xiao H C. Nuclear Science and Engineering, 2015, 35(3), 395(in Chinese).
肖宏才. 核科学与工程, 2015, 35(3), 395.
2 Han J S, Liu B, Li W Q. Nuclear Science and Technology, 2018, 6(3), 87(in Chinese).
韩金盛,刘宾,李文强,等. 核科学与技术,2018,6(3),87.
3 Weisenburger A, Jianu A, An W, et al. In: Conference Record of the IWSMT-10. Beijing, 2010, pp. 3.
4 Martín-Muñoz. Journal of Nuclear Materials, 2004, 335, 194.
5 Bai P W. The preparation and corrosion resistance in Pb-Bi alloy of SiC films on 15-15Ti steel. Master's Thesis, Hefei University of Technology, China, 2017 (in Chinese).
柏佩文. 15-15Ti钢上SiC薄膜的制备及其耐铅铋合金腐蚀性能的研究. 硕士学位论文,合肥工业大学, 2017.
6 Long B, Tong Z, Groschel F, et al. Journal of Nuclear Materials, 2008, 377, 219.
7 Gorynin V,Karzov G P, Markov V G, et al. Metal Science and Heat Treatment, 1999, 41, 384.
8 Li N. Nuclear Materials, 2002, 300, 73.
9 Chang H L. Study on the experimental device for Lead-bismuth eutectic alloy with oxygen control. Ph.D. Thesis, University of Chinese Academy of Sciences, China, 2018(in Chinese).
常海龙. 控氧液态铅铋合金实验装置研究. 博士学位论文,中国科学院大学, 2018.
10 Gorynin, V.Proceedings of the Conference Heavy Liquid Metals Coolants in Nuclear Technologies (HCLM-98), 1998(1), 120.
11 Yuji Kurata, Shigeru Saito. In:Actinide and fission produce partitioning and transmutation, Japan, 2010, pp. 9.
12 Lin Z W, Li H Q, Zhang J. Transactions of Materials and Heat Treatment, 2017, 38(11), 114(in Chinese).
林志伟, 李合琴,张静. 材料热处理学报, 2017, 38(11),114.
13 Ronald G, Ballinger R. The development and production of a functionally graded composite for Pb-Bi service. Final Report, 2011, pp.38.
14 严伟,石全强,单以银.中国专利, CN105386051 A, 2016.
15 石全强,严伟,单以银.中国专利, CN109666905 A, 2019.
16 García Ferré F,Mairov A, Iadicicco D, et al. Corrosion Science, 2017, 124, 80.
17 Enrico Miorin, Francesco Montagner, Valentina Zin.Surface and Coatings Technology, 2019, 377,124890.
18 Heinzel A, Müller G, Weisenburger A. Journal of Nuclear Materials, 2009, 392, 255.
19 Utili M, Agostini M, Coccoluto G, Lorenzinia E.Nuclear Engineering and Design, 2011, 241, 1295.
20 Abu Khalid Rivai, Minoru Takahashi. Progress in Nuclear Energy, 2008, 50, 560.
21 Chaia N. Standard specification for Aluminum diffusion coating applied by pack cementation process. American Society of Testing Materials Press, America, 2003.
22 Deloffre P, Balbaud-Célérier F, Terlain A. Journal of Nuclear Materials, 2004, 335, 180.
23 Deloffre P, Herbert F, Delisle C, et al. Rapport Technique SCCME, 2003, 12, 584.
24 马胜强,万德才,薛德祯. 中国专利,CN111020552 A,2020.
25 Fazio C, Ricapito I, Scaddozo G, et al.Journal of Nuclear Materials, 2003, 318, 325.
26 Lei M, Dong W W, Fang X D.Nuclear Science and Engineering, 2018, 38(3), 498(in Chinese).
雷曼,董伟伟,方晓东. 核科学与工程,2018, 38 (3), 498.
27 Engelkoa V, Muellerd G, Rusanov A.Journal of Nuclear Materials,2011, 415, 270.
28 Kurata Y, Futakawa M, Kikuchi K, et al. Journal of Nuclear Materials, 2002, 301(1), 28.
29 Jiang Y L, Qiu C J, Liu Z.China Surface Engineering, 2015, 28(2), 84(in Chinese).
蒋艳林,邱长军,刘赞. 中国表面工程,2015, 28(2), 84.
30 Xia Y, Qiu C J, Nong Y. Equipment Manufacturing Technology, 2015(12), 6(in Chinese).
夏琰,邱长军,农毅. 装备制造技术,2015(12),6.
31 Zhang M L, Zheng W Q, Qiu C J.Heat Treatment of Metals, 2015, 40(3), 19(in Chinese).
张曼莉,郑文权,邱长军.金属热处理,2015, 40(3),19.
32 Zhang W H,Wang Z B, Lu K. Journal of Nuclear Materials,2018,38(3), 151.
33 Smith C F, Cinotti L. Lead-cooled fast reactor, Handbook of Generation IV Nuclear Reactors, 2016, pp. 119.
34 Kurata Y, Futakawa M. Journal of Nuclear Materials, 2004, 325, 217.
35 周强国,严伟,王威.中国专利,CN103898411 A,2014.
36 周强国,严伟,王威.中国专利, CN103898411 B,2016.
37 单以银,严伟,王志光. 中国专利,CN104032232 A,2014.
38 Barbier F, Rusanov A.Journal of Nuclear Materials, 2001, 296, 231.
39 Ballinger R G. In:The development and production of a functionally graded composite for Pb-Bi service, Final Report, Cambridge, 2011, pp.19.