多孔介质湿物理性质预测方法综述

doi:10.11896/cldb.21080186

Abstract
Figure/Table
References
Related Citation (8)

Download:

Full Text ( PDF ) (4628KB)
Export: BibTeX | EndNote (RIS)

Abstract The hygric properties of porous building materials are indispensable in the analysis of heat and moisture transfer in building envelopes. Since the 1980s, European and American countries have carried out a number of large-scale test projects for the hygric properties of typical buil-ding materials. These projects established basic databases covering hundreds of building materials' hygric properties. Chinese scholars began to study the hygric properties of porous building materials in the 1960s, but further exploration is still needed. In recent years, the research of buil-ding materials' hygric properties has been actively carried out by Chinese scholars and noticeable progress has been made. Due to the differences in raw materials and manufacturing processes, the international databases are not fully applicable in China. Therefore, it is necessary to establish an independent, complete and reliable database for typical building materials in China. In order to obtain the hygric properties, the most commonly used method is through experiments. Some test methods, however, are time and energy consuming. For example, it may take months or even years to complete the measurement on sorption isotherms. The operation process of pressure plate test is complex and requires high accuracy in pressure control. Meanwhile, the X-ray or nuclear magnetic resonance instrument used to test the liquid diffusivity is expensive and not suitable for laboratory popularization. Similar to most building materials, soil, fiber, rock and food are all porous media, and their hygric properties are the key parameters to study the storage and transfer of moisture. For example, the water retention curve is a necessary index for studying dryland soil; diffusivity is an important parameter for evaluating the thermal comfort of fabrics; permeability affects the efficiency of oil extraction; and sorption isotherms determine the preservation time of food. In order to quickly and accurately obtain their hygric properties, scholars have carried out a lot of research on the method of using known physical properties to predict the unknown hygric properties of soil, fiber, rock and food. This paper reviews the prediction methods for the hygric properties of such porous media, summarizes their pros and cons, and discusses their application possibility on porous building materials. The target is to combine experiments with prediction methods, in order to effectively obtain the hygric properties of porous building materials.

Key words： porous media hygric property building material prediction method

Published: 10 March 2023 Online: 2023-03-14

CLC number:

TU111

Fund:National Natural Science Foundation of China(52178065).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HUANG Xianqi
	LI Xiaolong
	FENG Chi

Cite this article:

HUANG Xianqi,LI Xiaolong,FENG Chi. Review of Prediction Methods for the Hygric Properties of Porous Media[J]. Materials Reports, 2023, 37(5): 21080186-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21080186 OR http://www.mater-rep.com/EN/Y2023/V37/I5/21080186

1 Feng C. Study on the test methods for the hygric properties of porous building materials. Ph. D. Thesis, South China University of Technology, China, 2014 (in Chinese).
冯驰. 多孔建筑材料湿物理性质的测试方法研究. 博士学位论文, 华南理工大学, 2014.
2 Brunauer S, Deming L S, Deming W E, et al. Journal of the American Chemical Society, 1940, 62(7), 1723.
3 Hens H. IEA Annex 14: Condensation and energy, Volume 3: Catalogue of material properties, International Energy Agency, America, 1991.
4 Kumaran M K. IEA Annex 24: Heat, air and moisture transfer in insulated envelope parts. Final Report, Volume 3, Task 3: Material Properties, International Energy Agency, America, 1996.
5 Kumaran M K. A thermal and moisture transport property database for common building and insulating materials, final report from ASHRAE research project 1018-RP, The National Research Council, Canada, 2002.
6 Beaulieu P, Bomberg M T, Cornick S M, et al. NRC publications archive, final report from MEWS project, The National Research Council, Canada, 2002.
7 International Organization for Standardization. ISO 12570:2000(E) Hygrothermal performance of building materials and products-determination of moisture content by drying at elevated temperature, Switzerland, 2000.
8 ASTM International. ASTM C1699-09(2015) Standard test method for moisture retention curves of porous building materials using pressure plates, America, 2015.
9 ASTM International. ASTM E96/E96M-22 Standard test method for water vapor transmission of materials, America, 2022.
10 International Organization for Standardization. ISO 12572:2016(E) Hygrothermal performance of building materials and products-determination of water vapour transmission properties, Switzerland, 2016.
11 International Organization for Standardization. ISO 10545:2018(E) Ceramic tiles-determination of water absorption, apparent porosity, apparent relative density and bulk density, Switzerland, 2018.
12 International Organization for Standardization. ISO 12571:2013(E) Hygrothermal performance of building materials and products-determination of hygroscopic sorption properties, Switzerland, 2013.
13 Huang F Q. Study of the moisture conductivity of building materials using radioisotopes, Institute of Scientific and Technical Information of China, China, 1965 (in Chinese).
黄福其. 利用放射性同位素研究建筑材料的湿传导系数, 中国科学技术情报研究所, 1965.
14 Wang B X, Fang Z H. Journal of Engineering Thermophysics, 1985, 6(1), 60 (in Chinese).
王补宣, 方肇洪. 工程热物理学报, 1985, 6(1), 60.
15 Wang B X, Yu W P. Journal of Engineering Thermophysics, 1987, 8(4), 363 (in Chinese).
王补宣, 虞维平. 工程热物理学报, 1987, 8(4), 363.
16 Han J T, Shi M H, Yu W P, et al. Acta Metrologica Sinica, 1995, 16(2), 153 (in Chinese).
韩吉田, 施明恒, 虞维平, 等. 计量学报, 1995, 16(2), 153.
17 Pei Q Q, Chen Z K. Journal of Hunan University(Natural Sciences), 1999, 26(4), 96 (in Chinese).
裴清清, 陈在康. 湖南大学学报:自然科学版, 1999, 26(4), 96.
18 Li K S, Zhang X, Han X, et al. Journal of Building Materials, 2009, 12(3), 288 (in Chinese).
李魁山, 张旭, 韩星, 等. 建筑材料学报, 2009, 12(3), 288.
19 Sun L X, Feng C, Li Y J, et al. Building Science, 2020, 36(12), 83 (in Chinese).
孙立新, 冯驰, 李艳娟, 等. 建筑科学, 2020, 36(12), 83.
20 Feng C, Yu X, Wang D L. Journal of Civil Architectural and Environmental Engineering. 2016, 38(2), 125 (in Chinese).
冯驰, 俞溪, 王德玲. 土木建筑与环境工程, 2016, 38(2), 125.
21 Zhang C Q, Tang M F, Feng C. Building Science, 2021, 37(4), 60 (in Chinese).
张传群, 唐鸣放, 冯驰. 建筑科学, 2021, 37(4), 60.
22 Lei Y, Yang H Y, Zhang Y, et al. Building Science, 2021, 37(2), 165 (in Chinese).
雷玥, 杨寒羽, 张宇, 等. 建筑科学, 2021, 37(2), 165.
23 Su Y, Zhu J, Wang P, et al. Chinese Agricultural Science Bulletin, 2013, 29(14), 140 (in Chinese).
苏杨, 朱健, 王平, 等. 中国农学通报, 2013, 29(14), 140.
24 Zhu W W. The research of microclimate state under clothing and the measurement of moisture resistance for fabric. Master's Thesis, Donghua University, China, 2014 (in Chinese).
朱维维. 衣下微气候状态分析及织物湿阻的测量. 硕士学位论文, 东华大学, 2014.
25 Wang W, Qian J Z, Ma L, et al. Hydrogeology & Engineering Geology, 2021, 48(3), 82 (in Chinese).
王玮, 钱家忠, 马雷, 等. 水文地质工程地质, 2021, 48(3), 82.
26 Lian W W, Zhang J, Li M F, et all. Chinese Journal of Tropical Crops, 2013, 34(12), 2424 (in Chinese).
连文伟, 张劲, 李明福, 等. 热带作物学报, 2013, 34(12), 2424.
27 De Burgh J M, Foster S J, Valipour H R. Cement and Concrete Research, 2016, 81, 134.
28 Song W F, Tian M W, Yu W D. The Journal of the Textile Institute, 2012, 103(8), 827.
29 Song Y, Dai G, Zhao L, et al. Construction and Building Materials, 2020, 247, 118527.
30 Nivedya M K, Mallick R B. International Journal of Pavement Engineering, 2020, 21(9), 1057.
31 KoíčJ,Žumár J, Pavlík Z, et al. Journal of Building Physics, 2011, 35(3), 238.
32 Khlosi M, Alhamdoosh M, Douaik A, et al. European Journal of Soil Science, 2016, 67(3), 276.
33 Gunarathna M H J P, Sakai K, Nakandakari T, et al. Water, 2019, 11(9), 1940.
34 Kohler R, Alex R, Brielmann R, et al. Macromolecular Symposia, 2006, 244(1), 89.
35 Mazaheripour H, Faria R, Azenha M, et al. Advances in Cement Research, 2020, 33(6), 257.
36 Aubertin M, Mbonimpa M, Bussière B, et al. Canadian Geotechnical Journal, 2003, 40(6), 1104.
37 Abdou Ibro M, Verdier J, Geoffroy S, et al. Cement and Concrete Research, 2021, 142, 106310.
38 Zhang Z, Scherer G. Construction and Building Materials, 2018, 191, 193.
39 Sánchez-Fajardo V M, Torres M E, Moreno A J. Construction and Building Materials, 2014, 53, 225.
40 Huang G, Zhang R. Geoderma, 2005, 127(1-2), 52.
41 Pia G, Sanna U. International Journal of Engineering Science, 2014, 75, 31.
42 He G, Zhao Z, Ming P, et al. Journal of Power Sources, 2007, 163(2), 846.
43 Behrang A, Kantzas A. Fuel, 2017, 188, 239.
44 Benavente D, Pla C, Cueto N, et al. Engineering Geology, 2015, 195, 301.
45 Perré P, Turner I. Holzforschung, 2001, 55(4), 417.
46 Shen Y, Xu P, Qiu S, et al. International Journal of Heat and Mass Transfer, 2020, 152, 119540.
47 Botula Y D, Van Ranst E, Cornelis W M. Revista Brasileira de Ciência do Solo, 2014, 38, 679.
48 Myhara R M, Sablani S S, Al-Alawi S M, et al. LWT-Food Science and Technology, 1998, 31(7), 699.
49 Peng G, Chen X, Wu W, et al. Journal of Food Engineering, 2007, 80(2), 562.
50 Janjai S, Intawee P, Tohsing K, et al. Computers and Electronics in Agriculture, 2009, 66(2), 209.
51 Koekkoek E J W, Booltink H. European Journal of Soil Science, 1999, 50(3), 489.
52 Najigivi A, Khaloo A, Iraji Zad A, et al. International Journal of Concrete Structures and Materials, 2013, 7(3), 225.
53 Wu J, Yin X, Xiao H. Science Bulletin, 2018, 63(18), 1215.
54 Yu B, Zhao H, Tian J, et al. Journal of Natural Gas Science and Engineering, 2021, 86, 103742.
55 Kočí J, Černý R. Advanced Materials Research, 2015, 1126, 75.
56 Zhu W, Chao Z, Ma G. Advances in Civil Engineering, 2020, 2020, 4718493.
57 Sun J, Zhang J, Gu Y, et al. Construction and Building Materials, 2019, 207, 440.
58 Nguyen P M, Haghverdi A, De Pue J, et al. Biosystems Engineering, 2017, 153, 12.
59 Achieng K O. Computers & Geosciences, 2019, 133, 104320.
60 Guio Blanco C M, Brito Gomez V M, Crespo P, et al. Geoderma, 2018, 316, 100.
61 Rastgou M, Bayat H, Mansoorizadeh M, et al. Computers and Electronics in Agriculture, 2020, 174, 105502.
62 Huang J, Duan T, Zhang Y, et al. Advances in Civil Engineering, 2020, 2020, 8863181.
63 Rastgou M, Bayat H, Mansoorizadeh M, et al. Soil and Tillage Research, 2021, 210, 104980.
64 De Pue J, Botula Y D, Nguyen P M, et al. Journal of Hydrology, 2020, 597, 125770.
65 Pohjankukka J, Nevalainen P, Pahikkala T, et al. In: Artificial Intelligence Applications and Innovations. AIAI 2014. IFIP Advances in Information and Communication Technology. Berlin, 2014, pp. 436.
66 Gao N. Development and evaluation of pedotransferfunctions for austrian soil. Master's Thesis, North China Electric Power University, China, 2017 (in Chinese).
高楠. 奥地利土壤转换函数的构建研究. 硕士学位论文, 华北电力大学, 2017.
67 Cortes C, Vapnik V. Machine Learning, 1995, 20(3), 273.
68 Liu W, Fan A W, Huang X M. Theory and application of heat and mass transfer in porous media, China Science Publishing & Media Lta, China, 2006 (in Chinese).
刘伟, 范爱武, 黄晓明. 多孔介质传热传质理论与应用, 科学出版社, 2006.
69 Wang L W, Tamainot-Telto Z, Metcalf S J, et al. Applied Thermal Engineering, 2010, 30(13), 1805.
70 Cai Z Y. Experimental study and numerical simulation on mechanism of heat and mass transfer in wet porous media. Master's Thesis, Shandong Jianzhu University, China, 2017 (in Chinese).
蔡正燕. 含湿多孔介质热湿传递机理实验研究及数值模拟分析. 硕士学位论文, 山东建筑大学, 2017.
71 Yang L, Zhang Y S, Zhang C X. Bulletin of the Chinese Ceramic Society, 2020, 39(12), 3775 (in Chinese).
杨林, 张云升, 张春晓. 硅酸盐通报, 2020, 39 (12), 3775.
72 Guo X G, Wang J, Shi Z Q, et al. Bulletin of the Chinese Ceramic Society, 2018, 37(12), 3939 (in Chinese).
郭兴国, 王佳, 史子群, 等. 硅酸盐通报, 2018, 37(12), 3939.
73 Li Y J, Sun L X, Yang J F, et all. Journal of Building Energy Efficiency, 2020, 48(9), 71 (in Chinese).
李艳娟, 孙立新, 杨静芬, 等. 建筑节能, 2020, 48(9), 71.
74 Cooley L A, Prowell B D, Brown E R. Issues pertaining to the permeability characteristics of coarsegraded superpave mixes, National Center for Asphalt Technology, America, 2002.