汽车用铝钢无匙孔搅拌摩擦点焊接头组织及界面特征研究

doi:10.11896/cldb.21070281

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (37794KB)
Export: BibTeX | EndNote (RIS)

Abstract With the development of lightweight technology, the applications of the dissimilar metals joints between steel and aluminum become more and more widely in modern automobile industry. The keyhole can be eliminated by retracting FSSW process, and it also has low heat input,more refined grain and higher strength. In this work, the dissimilar metals keyhole-free FSSW joints between 0.7 mm steel and 2 mm aluminium alloy were successfully realized. Experimental study friction stir spot welding without keyholes of aluminum and steel dissimilar metals at different welding rotation speed, the effect of the rotation on tensile-shear strength of the speed, the fracture mechanism, the microstructure of different weld zones and the interface behaviour were analysed. In this paper, the author used the friction stir welding machine which was indepen-dently researched and successfully realized the lap connection between 0.7 mm steel plate and 2 mm aluminium alloy plate with different rotating speeds. The results show that the welding speed is 1 200 r/min, the pressing amount is 0.2 mm, and the welding time is 15 s. The welding surface joint has the best mechanical tensile properties, and the fracture location is in the heat mechanical affected zone. Intermetallic compounds (AlFe₃, Al₁₃Fe₄,AlFe) with a thickness of about 6μm were formed at the lap interface. The microstructure and fracture morphology of the joint were observed and analyzed by scanning electron microscopy (SEM) and energy spectrum analysis (EDS), and it was found that the fracture mode was mixed fracture mechanism. The connection at the interface is a mechanical and metallurgical bonding.

Key words： keyhole-free FSSW dissimilar metals aluminum alloy galvanized steel interface behavior

Published: 10 March 2023 Online: 2023-03-14

CLC number:

TG453.9

Fund:Major Science and Technology Project of Gansu Province (18ZD2GC013) and Saic Seed Fund (T244).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Zhongke
	JIANG Changming
	LI Xuanbai
	XIONG Jianqiang
	TONG Hui

Cite this article:

ZHANG Zhongke,JIANG Changming,LI Xuanbai, et al. Study on Microstructure and Interface Characteristics of Automobile Aluminum to Steel Refilled Friction Stir Spot Welding Without Keyhole[J]. Materials Reports, 2023, 37(5): 21070281-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21070281 OR http://www.mater-rep.com/EN/Y2023/V37/I5/21070281

1 Li H, Liu X S, Zhang Y S, et al. Materials Reports A:Review Papers, 2019, 33(12), 3853(in Chinese).
李红, 刘旭升, 张宜生, 等. 材料导报:综述篇, 2019, 33(12), 3853.
2 Wang X J, Zhang Y Z, Zhang Z K, et al. Transactions of the China Welding Institution, 2015, 36(1), 1(in Chinese).
王希靖, 张亚州, 张忠科, 等. 焊接学报, 2015, 36(1), 1.
3 LI Y B, Ma Y W, Lou M, et al. Journal of Mechanical Engineering, 2016, 52(24), 1(in Chinese).
李永兵, 马运五, 楼铭, 等. 机械工程学报, 2016, 52(24), 1.
4 Liang H, Yan K, Wang Q, et al. Journal of Materials Engineering & Performance, 2016, 25(12), 1.
5 Freridunie E, Movahedim M, Kokabi A H. Journal of Materials Processing Technology, 2015, 224(10), 1.
6 Dong H G, Chen S, Song Y, et al. Materials & Design, 2016, 94 (3), 457.
7 Qin G L, Su Y H, Yu S J, et al. Acta Metallurgica Sinica, 2012, 48(8), 1018(in Chinese).
秦国梁, 苏玉虎, 王术军, 等. 金属学报, 2012, 48(8), 1018.
8 Gu Y F, Li J, Shi Y, et al. The Chinese Journal of Nonferrous Metals, 2016, 26(4), 758(in Chinese).
顾玉芬, 李杰, 石玗, 等. 中国有色金属学报, 2016, 26(4), 758.
9 Xu K, Zhang S Q. Advances in Materials Science and Engineering, 2020, 2020 (5), 9701976.
10 Wang X P, Morisada Y, Fuji H. Materials Science & Engineering A, 2021, 809 (3), 141005.
11 Meng X, Huang Y, Cao J, et al. Progress in Materials Science, 2021, 115, 100706.
12 Shen Z, Ding Y, Chen J, et al. Journal of Materials Science & Technology, 2019, 35(6), 73.
13 Zhang G Y, Li Y P, Gong W B, et al. Journal of Materials Engineering, 2020, 48(8), 149(in Chinese).
张桂源, 李于朋, 宫文彪, 等. 材料工程, 2020, 48(8), 149.
14 Wu X H, Cao L J, Miao C H, et al. Journal of Chongqing University of Technology(Natural Science), 2022, 36(2), 76(in Chinese).
吴晓虎, 曹丽杰, 苗臣怀, 等. 重庆理工大学学报(自然科学), 2022, 36(2), 76.
15 Liu K L, Gao H, Cheng Z L, et al. Ordnance Material Science and Engineering, 2020, 43(1), 117(in Chinese).
刘凯龙, 高辉, 程璋良, 等. 兵器材料科学与工程, 2020, 43(1), 117.
16 Sun J, Huang J, Lu F, et al. Metallurgical and Materials Transactions A, 2020, 51(4), 1677.
17 Movahedi M, Kokabia H,Reihani S M S, et al. Materials & Design, 2013, 44(2), 487