工程陶瓷磨削过程的声发射在线监测研究进展

doi:10.11896/cldb.21050196

Abstract
Figure/Table
References
Related Citation (6)

Download:

Full Text ( PDF ) (9115KB)
Export: BibTeX | EndNote (RIS)

Abstract As a typical hard and brittle material, advanced ceramics are machined mainly by precision grinding and lapping of superhard fine abrasives. On-line monitoring of grinding process and timely adjustment of process parameters is an important way to ensure the surface quality of workpiece and improve grinding efficiency. Acoustic emission (AE) has been widely used in grinding process monitoring because of its high sensitivity and real-time response. This paper describes the basic principle of AE technology, summarizes the common signal analysis methods of AE monitoring in grinding process of advanced ceramics, as well as the research progress of AE technology in the fields of grinding wheel wear and dressing monitoring, grinding burn monitoring, workpiece surface quality prediction and intelligent grinding monitoring system construction at home and abroad. Combined with the current situation and shortcomings, the future application prospect of AE technology in grinding monitoring is prospected in order to promote the application expansion of AE technology in advanced ceramics grinding monitoring.

Key words： acoustic emission engineering ceramics pattern recognition grinding wheel wear grinding burn intelligent monitoring

Published: 25 February 2023 Online: 2023-03-02

CLC number:	TH16
	TH145

Fund:Natural Science Foundation of Hunan Province(2020JJ4309) and Scientific Research Foundation of Hunan Provincial Education Department of China(19A163).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WAN Linlin
	ZHOU Qiming
	DENG Zhaohui

Cite this article:

WAN Linlin,ZHOU Qiming,DENG Zhaohui. Research Progress of Acoustic Emission On-line Monitoring in the Grinding Process of Engineering Ceramics[J]. Materials Reports, 2023, 37(4): 21050196-11.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.21050196 OR http://www.mater-rep.com/EN/Y2023/V37/I4/21050196

1 Jin Z h, Gao J Q, Qiao G J. Engineering ceramic materials, Xi'an Jiaotong University Press, China, 2000, pp. 8 (in Chinese).
金志浩, 高积强, 乔冠军. 工程陶瓷材料, 西安交通大学出版社, 2000, pp.8.
2 Pawar K. International Journal of Ceramics and Ceramic Technology, 2016, 2(1), 18.
3 Yuan J L, Zhang F H, Dai Y F, et al, Journal of Mechanical Engineering, 2010, 46(15), 161 (in Chinese).
袁巨龙, 张飞虎, 戴一帆, 等. 机械工程学报, 2010, 46(15), 161.
4 Ma L J, Gong Y D, Gu L C, et al, Journal of Mechanical Engineering, 2017, 53(15), 201 (in Chinese).
马廉洁, 巩亚东, 顾立晨, 等. 机械工程学报, 2017, 53(15), 201.
5 Liu G J, Gong Y D, Wang W S. China Mechanical Engineering, 2003(15), 14 (in Chinese).
刘贵杰, 巩亚东, 王宛山. 中国机械工程, 2003(15), 14.
6 Chi Y L, Li H L. Chinese Journal of Construction Machinery, 2015, 13(6), 532 (in Chinese).
迟玉伦, 李郝林. 中国工程机械学报, 2015, 13(6), 532.
7 Lee D E, Hwang I, Valente C, et al. International Journal of Machine Tools and Manufacture, 2005, 46(2), 33.
8 Wang G H. Engineering and Construction, 2020, 34(6), 1115 (in Chinese).
汪国华. 工程与建设, 2020, 34(6), 1115.
9 Guo L, Guo J T, Wang Y, et al. Manufacturing Technology & Machine Tool, 2018(3), 13 (in Chinese).
郭力, 郭君涛, 王艺, 等. 制造技术与机床, 2018(3), 13.
10 Han X, Wu T. International Journal of Advanced Manufacturing Technology, 2013, 67(9-12), 1997.
11 Zhang Z Q, Li G L, Wang H D, et al. Tribology International, 2012, 47, 25.
12 Guo L, Yin S H, Li B, et al. China Mechanical Engineering, 2009, 20(4), 413 (in Chinese).
郭力, 尹韶辉, 李波, 等. 中国机械工程, 2009, 20(4), 413.
13 Rameshkumar K, Mouli D S B, Shivith K. SAE International Journal of Materials and Manufacturing, 2021, 14(4), 26.
14 Lei Y G, Lin J, He Z J, et al. Mechanical Systems and Signal Processing, 2013, 35(1-2), 108.
15 Huang N E, Shen Z, Long S R, et al. Proceedings Mathematical Physical & Engineering Sciences, 1998, 454(1971), 903.
16 Zhang R R, Asce M, Ma S, et al. Journal of Engineering Mechanics, 2003, 129(8), 861.
17 Huang N E, Wu Z. Reviews of Geophysics, 2008, 46(2).
18 Dragomiretskiy K, Zosso D. IEEE Transactions on Signal Processing, 2014, 62(3), 531.
19 Yuan J, Liu L B, Zhang Y X, et al. Modern Manufacturing Engineering, 2021(3), 152 (in Chinese).
袁军, 刘丽冰, 张艳蕊, 等. 现代制造工程, 2021(3), 152.
20 Zhang J, Zhao L J. Pattern recognition, Publishing House of Electronics Industry, China, 2010, pp. 11 (in Chinese).
张晶, 赵丽江. 模式识别, 电子工业出版社, 2010, pp. 11.
21 Zhai J Q, Yang X X, Cheng Y L, et al. Computer Measurement & Control, 2021, 29(3), 1. (in Chinese).
翟嘉琪, 杨希祥, 程玉强, 等. 计算机测量与控制, 2021, 29(3), 1.
22 Chen X, Griffin J, Liu Q. International Journal of Manufacturing Technology & Management, 2007, 12(1/2/3), 184.
23 Guo L, Huo K K, Guo J T. Journal of Hunan University(Natural Sciences), 2019, 46(2), 58 (in Chinese).
郭力, 霍可可, 郭君涛. 湖南大学学报(自然科学版), 2019, 46(2), 58.
24 Hu X, Jiao H F, He Y. Mechanical Science and Technology, 2012(7), 140 (in Chinese).
胡新, 焦慧峰, 贺永. 机械科学与技术, 2012(7), 140.
25 Huang Y, Zha W X. Computer Engineering & Software, 2012, 33(6), 107 (in Chinese).
黄衍, 查伟雄. 软件, 2012, 33(6), 107.
26 Zhang Y, Zhu Y L. Proceedings of the CSEE, 2021, 41(18), 6472 (in Chinese).
张翼, 朱永利. 中国电机工程学报, 2021, 41(18), 6472.
27 Hinton G E, Osindero S, Teh Y W. Neural Computation, 2006, 18(7), 1528.
28 Peng X, Yang F, Wang G, et al. IEEE Transactions on Power Delivery, 2019, 1, 1.
29 Li R, Zhang C, Wan L, et al. Nondestructive Testing, 2021, 43(2), 5 (in Chinese).
李睿, 张纯, 万乐, 等. 无损检测, 2021, 43(2), 5.
30 Deng Z H, Zhang B, Sun Z Y, et al. China Mechanical Engineering, 2002(18), 84 (in Chinese).
邓朝晖, 张璧, 孙宗禹, 等. 中国机械工程, 2002(18), 84.
31 Xia T, Deng Z H, Liu W, et al. Machine Building & Automation, 2019, 48(5), 1 (in Chinese).
夏涛, 邓朝晖, 刘伟, 等. 机械制造与自动化, 2019, 48(5), 1.
32 Lin B, Wang H, Wei J, et al. Chinese Journal of Aeronautics, 2021, 34(5), 404.
33 Denkena B, Grove T, Bremer I, et al. CIRP Annals-Manufacturing Technology, 2016, 65(1), 333.
34 Hassui A, Diniz A E, Oliveira J, et al. Wear, 1998, 217(1), 7.
35 Hwang T W, Whitenton E P, Hsu N N, et al. Ultrasonics, 2000, 38(1-8), 614.
36 Monici R D, Bianchi E C, Catai R E, et al. International Journal of Machine Tools & Manufacture, 2006, 46(2), 122.
37 Tawakoli T. International Journal of Mechatronics & Manufacturing Systems, 2008, 1(4), 307.
38 Feng J, Kim B S, Shih A, et al. Journal of Materials Processing Technology, 2009, 209(11), 5110.
39 Yin G Q, Gong Y D, Li Y W, et al. Journal of Northeastern University(Natural Science), 2018, 39(9), 1288 (in Chinese).
尹国强, 巩亚东, 李宥玮, 等. 东北大学学报(自然科学版), 2018, 39(9), 1288.
40 Liu G, Qiang W, Kang R. Key Engineering Materials, 2008, 375-376, 598.
41 Yang Y. Research on grinding of fiber reinforced material and wheel wear state based on acoustic emission signals. Master's Thesis, Tianjin University, China, 2012(in Chinese).
杨杨. 纤维增强复合材料的磨削及基于声发射信号砂轮磨损状态识别研究. 硕士学位论文, 天津大学, 2012.
42 Lopes W N, Ferreira F I, Alexandre F A, et al. Ietence Measurement & Technology, 2017, 11(5), 631.
43 Wang H Y, Yao Z Q, Xu S. Modular Machine Tool & Automatic Manufacturing Technique, 2018(8), 33 (in Chinese).
王洪雨, 姚振强, 许胜. 组合机床与自动化加工技术, 2018(8), 33.
44 Guo L, Deng Y, Huo K K. Journal of Hunan University(Natural Sciences), 2018, 45(4), 34 (in Chinese).
郭力, 邓喻, 霍可可. 湖南大学学报(自然科学版), 2018, 45(4), 34.
45 Huo K K. The research on the grinding wheel wear and surface roughness inacoustic emission monitoring of engineering ceramic in grinding. Master's Thesis, Hunan University, China, 2018(in Chinese).
霍可可. 工程陶瓷磨削中砂轮磨损与表面粗糙度声发射监测的研究. 硕士学位论文, 湖南大学, 2018.
46 Gong Z W. Identification of blunting state of grinding wheel and study on characteristic parameters of acoustic emission. Master's Thesis, Nangjing University, China, 2020(in Chinese).
龚子维. 磨削砂轮钝化识别与声发射特征参数研究. 硕士学位论文, 南京大学, 2020.
47 Moia D, Thomazella I H, Aguiar P R, et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2015, 37(2), 627.
48 Ding N, Zhao C L, Luo X C, et al. Solid State Phenomena, 2017, 261, 221.
49 Guo W C, Li B Z, Yang J G, et al. Journal of Shanghai Jiaotong University, 2019, 53(12), 1475 (in Chinese).
郭维诚, 李蓓智, 杨建国, 等. 上海交通大学学报, 2019, 53(12), 1475.
50 Krishnan P S, Rameshkumar K. Materials Today: Proceedings, 2019, 46, 9168.
51 Zhong L M, Li L J, Yang J, et al. Applied Acoustics, 2019, 38(2), 151 (in Chinese).
钟利民, 李丽娟, 杨京, 等. 应用声学, 2019, 38(2), 151.
52 Lee C H, Jwo J S, Hsieh H Y, et al. IEEE Access, 2020, 8, 58279.
53 Chi Y L, Li H L. Manufacturing Technology & Machine Tool, 2010(9), 99 (in Chinese).
迟玉伦, 李郝林. 制造技术与机床, 2010(9), 99.
54 Xu Y J, He B G. Microcomputer Information, 2012(4), 54 (in Chinese).
许勇军, 何邦贵. 微计算机信息, 2012(4), 54.
55 Li C Y, Li H F, Sha J. Mechanical Engineer, 2017(3), 10 (in Chinese).
李超越, 李焕锋, 沙杰. 机械工程师, 2017(3), 10.
56 Chen B, Wang G, Liu J M, et al. China Mechanical Engineering, 2017, 28(18), 2242 (in Chinese).
陈冰, 王各, 刘建明, 等. 中国机械工程, 2017, 28(18), 2242.
57 Eda H, Kishi K, Usui N, et al. Journal of the Japan Society of Precision Engineering, 1983, 49(9), 1257.
58 Eda H, Kishi K, Xia S, et al. Transactions of the Japan Society of Mechanical Engineers C, 1989, 55(511), 797.
59 Qiang L, Xun C, Gindy N. International Journal of Machine Tools & Manufacture, 2006, 46(3-4), 284.
60 Griffin J M, Chen X. International Journal of Advanced Manufacturing Technology, 2009, 45(11), 1152.
61 Zya B, Zy A, Chao X A, et al. Measurement, 2014, 47, 14.
62 Chen X, Tahsin T. Production & Manufacturing Research, 2016, 4(1), 190.
63 Gao Z Y, Lin J, Wang X F, et al. Chinese Journal of Mechanical Engineering, 2019, 32(1), 68.
64 Guo W, Li B, Shen S, et al. The International Journal of Advanced Manufacturing Technology, 2019, 103(5-8), 2837.
65 Webster J, Marinescu I, Bennett R, et al. Cirp, 1994, 43(1), 299.
66 Yin G, Nisal T, Marinescu I D, et al. In: The ASME 2014 International Manufacturing Science and Engineering Conference. Michigan, 2014, pp. 3969.
67 Dias E A, Pereira F B, Filho S, et al. Measurement, 2016, 94, 71.
68 Chen B, Li S C, Deng Z H, et al. Ordnance Material Science and Engineering, 2018, 41(1), 8 (in Chinese).
陈冰, 李时春, 邓朝晖, 等. 兵器材料科学与工程, 2018, 41(1), 8.
69 Maillet E, Singhal A, Hilmas A, et al. Journal of the European Ceramic Society, 2019, 39(13), 3546.
70 Huang S Y, Fang X Y, Du X. Precise Manufacturing & Automation, 2020(2), 60 (in Chinese).
黄嵩原, 房小艳, 杜雄. 精密制造与自动化, 2020(2), 60.
71 Hu J X, Jiang C, Lang X H. Electronic Science and Technology, 2020, 33(3), 26 (in Chinese).
胡吉雄, 姜晨, 郎小虎. 电子科技, 2020, 33(3), 26.
72 Nakai M E, Júnior H G, Aguiar P R, et al. International Journal of Machining & Machinability of Materials, 2015, 17(5), 454.
73 Guo L, Wang W C, Guo J T. Journal of Hunan University(Natural Sciences), 2021, 48(8), 37 (in Chinese).
郭力, 王伟程, 郭君涛. 湖南大学学报(自然科学版), 2021, 48(8), 37.
74 Liu G J, Gong Y D, Wang W S. Mechanical Engineer, 2001(12), 4 (in Chinese).
刘贵杰, 巩亚东, 王宛山. 机械工程师, 2001(12), 4.
75 Zhang J Y, Hu X Y, Hu Z X, et al. In: China Instrumentation and Measurement and Control Technology Progress Conference. Hebei, 2008, pp. 637 (in Chinese).
张甲英, 呼小元, 胡仲翔, 等. 中国仪器仪表与测控技术进展大会. 河北, 2008, pp.637.
76 Bo H Z, Wang L T. Modern Manufacturing Engineering, 2008(5), 121 (in Chinese).
柏航州, 王隆太. 现代制造工程, 2008(5), 121.
77 Huo X J, Teng J X, Wang W D, et al. Advanced Materials Research, 2014, 887-888, 1175.
78 Shi X L. Study on wheel setting monitoring and precise feed control for engineering ceramic work piece grinding proces. Master's Thesis, Ocean University Of China, China, 2008(in Chinese).
史晓龙. 工程陶瓷工件磨削过程对刀检测及进给量精确控制研究. 硕士学位论文, 中国海洋大学, 2008.
79 Liu G J, Zhang Q L, Zhu S F, et al. Materials Science Forum, 2009, 857, 153.
80 Guo L, Guo J T, Huo K K. Manufacturing Technology & Machine Tool, 2019, 683(5), 103(in Chinese).
郭力, 郭君涛, 霍可可. 制造技术与机床, 2019, 683(5), 103.
81 Zhu J H, Shi C Y, Feng K M, et al. Tool Engineering, 2017, 51(9), 6 (in Chinese).
朱建辉, 师超钰, 冯克明, 等. 工具技术, 2017, 51(9), 6.
82 Sheng W J, Zhao Q B, Han D F, et al. Transducer and Microsystem Technologies, 2010, 29(4), 99 (in Chinese).
盛炜佳, 赵勍波, 韩东芳, 等. 传感器与微系统, 2010, 29(4), 99.
83 Lezanski P. Journal of Materials Processing Technology, 2001, 109(3), 258.
84 Gong Y D, Lv Y, Wang W S, et al. Journal of Northeastern University(Natural Science), 2003(3), 47 (in Chinese).
巩亚东, 吕洋, 王宛山, 等. 东北大学学报(自然科学版), 2003(3), 47.
85 Tang Q L. Research on Intelligent Monitoring Technology and System of Precision Grinding Equipment. Master's Thesis, Xiamen University, China, 2019 (in Chinese).
汤期林. 精密磨削加工装备的智能化监控技术与系统研究. 硕士学位论文, 厦门大学, 2019.
86 Su S B, Bi G, Peng Y F, et al. Aeronautical Manufacturing Technology, 2020, 63(11), 88 (in Chinese).
苏史博, 毕果, 彭云峰, 等. 航空制造技术, 2020, 63(11), 88.