块体金属玻璃的加工硬化行为

doi:10.11896/cldb.201903013

Abstract
Figure/Table
References
Related Citation (3)

Download:

Full Text ( PDF ) (3644KB)
Export: BibTeX | EndNote (RIS)

Abstract Bulk metallic glass (BMG) possesses unique mechanical properties, such as high strength, high hardness and large elastic strain limit, etc. However, due to the lack of crystalline defects including dislocation and twinning, plastic deformation of metallic glasses occurs in the form of highly localized shear bands. Consequently, they generally do not exhibit work-hardening, but occur strain softening and/or thermal softening. This leads to the premature catastrophic fracture of BMGs, which greatly hinders their widespread engineering application.
However, in recent years, apparent work-hardening behaviors have been observed in some monolithic BMG materials which has attracted significant interest in the field of engineering, and triggered scientific studies on the origin of work-hardening in BMGs. So far, the understanding of how the structure of metallic glasses affects their performance and deformation behavior remains quite limited, thus, the origin of work-hardening of BMGs is still a hot topic of controversy, In general, the work-hardening behavior of BMGs is closely related to their internal structural changes caused by external stress (energy), including the formation of multiple shear bands, the evolution of free volume and the behavior of nanocrystallization, and ultimately associated with the shear-band behavior during plastic deformation.
Cu_47.5Zr_47.5Al₅ was the first reported plastic BMG which has extensive work-hardening capability. Relevant studies suggested that the chemical and/or structural inhomogeneity with different scales existing in the alloy promoted the formation and multiplication of multiple shear bands during material deformation; while the interaction of massive shear bands in three dimensions increased the flow stress of the materials, resulting in the work-hardening behavior. which is ascribed to the work-hardening mechanism of BMGs. This theory was first proposed by Das et al., and later confirmed by a variety of other studies. Afterwards, strain hardening and softening phenomena were observed in some BMGs’ loading-unloading cycle nanoindentation tests, and a “free volume model” of BMG work-hardening was proposed, they believed that the change of external shear stress lead to the change of net free volume in amorphous structure, and then the variation in hardness of the material caused by the shear band behavior of plastic deformation micro-zone. Chen et al. excluded structural inhomogeneities of amorphous Cu₅₀Zr₅₀ ribbons, detected in situ nanocrystallization behavior at shear bands of bent Cu₅₀Zr₅₀ribbons, and proposed the strain hardening mechanism associated with deformation induced nanocrystallization based on the experimental observation of strong interactions between shear bands and nanocrystallites. These works enriched the basic principles and developed the related research method of BMGs work-hardening.
This paper briefly introduces the methods/parameters commonly used to evaluate the work-hardening capability of metal materials, and outlines the shear bands behaviors in BMGs. On the basis of this, the work-hardening behaviors observed in typical BMGs are analyzed and the possible work-hardening origin mechanisms of BMGs are discussed, which could be the reference for studying the mechanical behavior of BMGs and developing plastic BMGs as structural materials with excellent performance.

Key words： bulk metallic glasses work hardening shear-band behavior structural heterogeneity free volume model deformation-induced nanocrystallization

Published: 13 February 2019

CLC number:

TB331

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	SUN Guoyuan
	ZHANG Min

Cite this article:

SUN Guoyuan,ZHANG Min. The Work-hardening Behavior of Bulk Metallic Glasses[J]. Materials Reports, 2019, 33(3): 462-469.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.201903013 OR http://www.mater-rep.com/EN/Y2019/V33/I3/462

1 Greer A L. Science,1995,267(5206),1947.
2 Wang W H. Progress in Physics,2013,33(5),177(in Chinese).
汪卫华.物理学进展,2013,33(5),177.
3 Klement W, Willens R, Duwez P. Nature,1960,187(3),869.
4 Drehman A J, Greer A L, Turnbull D. Applied Physics Letters,1982,41(8),716.
5 Kui H W, Greer A L, Turnbull D. Applied Physics Letters,1984,45(6),615.
6 Löffler J F. Intermetallics,2003,11(6),529.
7 Inoue A, Kita K, Zhang T, et al. Materials Transactions JIM,1989,30(9),722.
8 Inoue A, Zhang T, Masumoto T. Materials Transactions JIM,1989,30(12),965.
9 Zhang T, Inoue A, Masumoto T. Materials Transactions JIM,1991,32(11),1005.
10 Inoue A, Kato A, Zhang T, et al. Materials Transactions JIM,1991,32(7),609.
11 Peker A, Johnson W L. Applied Physics Letters,1993,63(17),2342.
12 Chen H S, Wang T T. Journal of Applied Physics,1970,41(13),5338.
13 Bruck H A, Christman T, Rosakis A J, et al. Scripta Metallurgica et Materialia,1994,30(4),429.
14 Inoue A, Shen B L, Koshiba H, et al. Nature Materials,2003,2(10),661.
15 Telford M. Materials Today,2004,7(3),36.
16 Trexler M M, Thadhani N N. Progress in Materials Science,2010,55(8),759.
17 Tian L, Cheng Y Q, Shan Z W, et al. Nature Communications,2012,3(48),609.
18 Zhang Z F, Qu R T, Liu Z Q. Acta Metallurgica Sinica,2016,52(10),1171(in chinese).
张哲峰,屈瑞涛,刘增乾.金属学报,2016,52(10),1171.
19 Liu Y H, Wang G, Wang R J, et al. Science,2007,315(5817),1385.
20 Jang D, Greer J R. Nature Materials,2010,9(3),215.
21 Pauly S, Gorantla S, Wang G, et al. Nature Materials,2010,9(6),473.
22 Zeng Q S, Sheng H W, Ding Y, et al. Science,2011,332(6036),1404.
23 Greer A L, Cheng Y Q, Ma E. Materials Science and Engineering Reports,2013,74(4),71.
24 Z W Wu, M Z Li, W H Wang, et al. Nature Communications,2015,6(3),6035.
25 Wang Q, Zhang S T, Yang Y, et al. Nature Communications,2015,6,7876.
26 S Lan, Y Ren, X Y Wei. Nature Communications,2017,8,14679.
27 Yang B, Riester L, Nieh T G. Scripta Materialia,2006,54(7),1277.
28 Lee C M, Park K W, Lee J H, et al. Materials Science and Engineering A,2009,s513-514(11),160.
29 W H Liu, Z P Lu, J Y He, et al. Acta Materialia,2016,116,332.
30 Hays C C, Kim C P, Johnson W L. Physical Review Letters,2000,84(13),2901.
31 Schroers J, Johnson W L. Physical Review Letters,2004,93(25),255506.
32 Das J, Tang M B, Kim K B, et al. Physical Review Letters,2005,94(20),205501.
33 Chen L Y, Fu Z D, Zhang G Q, et al. Physical Review Letters,2008,100(7),075501.
34 Jiang W H, Jiang F, Liu F X, et al. Materials Science and Technology,2012,28(2),249.
35 Zhang Z Y, Wu Y, Zhou J, et al. Scripta Materialia,2013,69(1),73.
36 Narayan R L, Singh P S, Hofmann D C, et al. Acta Materialia,2012,60(13-14),5089.
37 Eckert J, Das J, Kim K B, et al. Intermetallics,2006,14,876.
38 Kim K B, Tang M B, Wang W H, et al. Applied Physics Letters,2006,88(5),407.
39 Kim K B, Das J, Venkataraman S et al. Applied Physics Letters,2006,89(7),180201.
40 Chen M W, Inoue A, Zhang W et al. Physical Review Letters,2006,96(24),245502.
41 Yao K F, Ruan F, Yang Y Q, et al. Applied Physics Letters,2006,88(12),1947.
42 Zhao Y H, Liao X Z, Cheng S, et al. Advanced Materials,2006,18(17),2280.
43 Chen H, He Y, Shiflet G J, et al. Nature,1994,367,541.
44 Inoue A, Zhang W, Tsurui T, et al. Philosophical Magazine Letters,2005,85(5),221.
45 Ma E. Nature Materials,2003,2(1),7.
46 Spaepen F. Acta Metallurgica,1977,25,407.
47 Argon A S. Acta Metallurgica,1979,27,47.
48 Leamy H J, Chen H S, Wang T T. Metallurgical Transactions,1972,3,699.
49 Liu C T, Heatherly L, Easton D S, et al. Metallurgical and Materials Transactions A,1998,29,1811.
50 Dai L H, Yan M, Liu L F, et al. Applied Physics Letters,2008,87(12),141916.
51 Jiang M Q, Dai L H. Journal of the Mechanics and Physics of Solids,2009,57,1267.
52 Jiang M Q. Chinese Journal of Solid Mechanics,2012,33(2),227(in Chinese).
蒋敏强.固体力学学报,2012,33(2),227.
53 Liu L F, Dai L H, Bai Y L, et al. Scientia Sinica Physica, Mechanica & Astronomica,2008,38(5),500(in Chinese)
刘龙飞,戴兰宏,白以龙,等.中国科学G辑:物理学力学天文学,2008,38(5),500.
54 Chen M W, Ma E, Hemker K J, et al. Science,2003,300,1275.