同轴送粉激光3D打印光粉耦合作用以及熔池气液界面追踪数值模拟的研究进展

doi:10.11896/cldb.201901020

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (3342KB)
Export: BibTeX | EndNote (RIS)

Abstract As a “toolless” digital manufacturing technology, metal laser 3D printing that get rid of the limitation of traditional processing methods is very likely to change the production mode of products and highly benefit the social and consumers. The 3D printing technology makes the high precision complex structure manufacturing possible through the precision machining mode of layer stacking, which will consumedly simplify the pro-duct design process, improve the integration of components and accelerate the producting cycles. Furthermore, compared to the “subtract mate-rial manufacturing” of blanks with cutting machines, 3D printing technology can reduce the amount of raw materials and greatly relieve the pressure of natural environment. Actually, 3D printing manufacturing is a “point by point scanning-line by line lapping-layer by layer stacking” cyclic process. During the process of the long time manufacturing, different parts of the material have went through a series of micro-heat treatment processes,including short-term temperature changes, unstable state, strong constraint and cyclic solid phase transition . The heating and cooling rate of these micro-heat treatments are extremely fast and the time of phase transition is very short. And the phase transition temperature, heating and cooling rate and phase transition duration of each micro-heat treatment change with the number of thermal cycles. Thus, the laser 3D printed metal components obtain a unique microstructure and exhibit a strong dependence on the processing conditions, which in turn affects the mecha-nical properties of the molded parts. Therefore, achieving the active control of the microstructure and metallurgical defects of laser 3D printed metal parts is crucial issue to be solved. The mastering of the coupling effect of the powder flow and the laser beam in the 3D printing process of the coaxial powder feeding metal laser, and the mass transfer and expansion characteristics of the gas-liquid free interface of the molten pool are the pivotal to select the optimal processing parameters and hence lead to an excellent mechanical properties of the metal. However, it is hard to accurately and quantitatively reveal the above problems by the means of experimental analysis. Yet the numerical simulation is capable of effectively revealing the microscopic laws . For example, in the aspect of light-powder coupling, most researchers currently study the interaction mechanism between laser beam and powder from the perspective of laser beam attenuation from single powder particle to powder flow. On the other hand, other researchers establish the mathematical model from the perspective of powder particle absorption and scattering to the laser beam, and adopt the Mie scattering theory and the Lambert-Beer law to analyse and calculate the interaction between the powder flow and the laser beam. Howe-ver, the reports revolve round numerical models including multi-angle and multi-factors such as powder flow attenuation on laser beam and absorption of powder flow and reflection and scattering of laser light is rare, therefore, the above aspects will be the main research direction of scholars in the future.
This paper mainly reviews the research progress of 3D printing simulations of coaxial powder metal laser in domestic and foreign research scho-lars, and elaborates the light-powder coupling, the gas-liquid interface and the solid-liquid interface tracking algorithm etc in the 3D printing process.

Key words： coaxial powder feeding laser 3D printing light-powder coupling gas-liquid interface tracking numerical simulation

Published: 24 January 2019

CLC number:

TG495

Fund:This work was financially supported by the Natural Science Foundation of China (51671043,51401041,51671042),the Graduate Innovation and Entrepreneurship Project of Dalian Jiaotong University (C-2017-12).

About author:: Xiaolong An, Dalian Jiaotong University, Dalian, China. He is currently doing his master’s degree in College of Materials Science and Engineering, Dalian Jiaotong University, Dalian, PR China. His principal research interest is laser additive manufacturing including laser metal deposition(LMD) and selective laser melting(SLM),especially majoring in the experiments and simulation of nickel-based materials processed by LMD.Xing Lu (corresponding author), Dalian Jiaotong University, Dalian, China. He is currently a full professor in College of Materials Science and Engineering, Dalian Jiaotong University, Dalian, PR China. He received his Ph.D. degree in materials science and engineering from the Institute of Metal Research, Chinese Academy of Sciences in 2007. In 2003—2004, he was a visiting scholar studied at the Max Planck Institute of Metals in
Germany and 2008—2009, he was a senior visiting scholar studied at Oxford University. His principal research interest is laser-based additive manufacturing including direct metal laser sintering(DMLS) and laser metal deposition(LMD).Pro.Lu has co-authored more than 26 papers in a number of internationally recongnized peer-review journal

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	AN Xiaolong
	LYU Yunzhuo
	QIN Zuoxiang
	LU Xing

Cite this article:

AN Xiaolong,LYU Yunzhuo,QIN Zuoxiang, et al. Research Progress on the Numerial Simulation of a Melting Pool Coupling of Light-Powder and Gas-Liquid Interface Tracking by Coaxial Powder Metal Laser 3D Printing[J]. Materials Reports, 2019, 33(1): 167-174.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.201901020 OR http://www.mater-rep.com/EN/Y2019/V33/I1/167

Zhang D Y. Laser manufacturing process, Tsinghua University Press,2008(in Chinese).张冬云.激光制造工艺,清华大学出版社,2008.2 Chen J M, Xu X Y, Xiao R S. Laser modern manufacturing technology, Beijing National Defense Industry Press,2007(in Chinese).陈继民,徐向阳,肖荣诗.激光现代制造技术,国防工业出版社,2007.3 Xi M Z, Yu G, Zhang Y Z, et al. Chinese Laser,2005,32(4),562(in Chinese).席明哲,虞钢,张永忠,等.中国激光,2005,32(4),562.4 Yang X C. Chinese Laser,2008,35(11),1664(in Chinese).杨洗陈.中国激光,2008,35(11),1664.5 Shi S H, Wang C, Xu A Q, et al. Chinese Laser,2012(3),56(in Chinese).石世宏,王晨,徐爱琴,等.中国激光,2012(3),56.6 He X, Fuerschbach P W, DebRoy T. Journal of Physics D: Applied Phy-sics,2003,36,1388.7 Zhao L, Tsukamoto S, Arakane G, et al. Science & Technology of Wel-ding & Joining,2011,16 (2),166.8 Do-Quang M, Amberg G, Pettersson C O. Journal of Heat Transfer,2008,130(9),253.9 He X, Mazumder J. Journal of Applied Physics,2007,101(5),2645.10 Bahrami A, Valentine D T, Helenbrook B T, et al. International Journal of Heat and Mass Transfer,2015,85,41.11 Zhang Y J, Yu G, He X L. Science China (Physics, Mechanics and Astronomy,2012,55(8),1431.12 Gan Z T, Liu H , Li S X, et al. International Journal of Heat and Mass Transfer,2017,111,709.13 Lu B H, Li D C. Machinery Manufacturing and Automation,2013,42(4),1(in Chinese).卢秉恒,李涤尘.机械制造与自动化,2013,42(4),1.14 Keicher D M, Smugeresky J E, Romero J A, et al. In: Proceedings of the SPIE-The International Society for Optical Engineering. Orlando,1997.15 Huang W D, Li Y M, Feng L P, et al. Journal of Material Engineering,2002(3),40(in Chinese).黄卫东,李延民,冯莉萍,等.材料工程,2002(3),40.16 Jia W P, Lin X, Chen J, et al. Chinese Laser,2007,34(9),1308(in Chinese).贾文鹏,林鑫,陈静,等.中国激光,2007,34(9),1308.17 Huang W D, Lin X, Chen J, et al. Laser Solid Forming, Northwestern Polytechnical University press,2007(in Chinese).黄卫东,林鑫,陈静,等.激光立体成形,西北工业大学出版社,2007.18 David S A, DebRoy T. Science,1992,257(5069),497.19 Toyserkani E, Corbin S, Khajepour A. Laser Cladding, CRC Press,2005.20 Tang Q, Pang S, Chen B, et al. International Journal of Heat and Mass Transfer,2014,78(7),203.21 Hu Y, He X, Yu G, et al. Applied Surface Science,2012,258(15),5914.22 Kumar A, Roy S. Computational Materiasl Science,2009,46(2),495.23 Gan Z, Yu G, He X,et al. International Journal of Heat and Mass Transfer,2017,104,28.24 Liu X M, Guan Z Z. Chinese Laser,1999,26(6),565(in Chinese).刘喜明,关振中.中国激光,1999,26(6),565.25 Srdja Zekovic, Rajeev Dwivedi, Radovan Kovacevic. International Journal of Machine Tools & Manufacture,2007,47,112.26 Qi H,Mazumder J,Green L,et al. Journal of Laser Applications,2005,17(3),136.27 Tabernero I, Lamikiz A, Martínez S. Journal of Materials Processing Technology,2012,212,516.28 Huang Y L, Liang G Y. Modelling and Simulation in Material Science and Engineering,2005,13(1),47.29 Pinkerton A J. Journal of Physics D: Applied Physics,2007,40(23),7323.30 Huan Qi ,Jyotirmoy Mazumder, Hyungson Ki. Journal of Applied Physics,2006,100,024903.31 Choi J,Han L,Hua Y. Journal of Heat Transfer,2005,127(9),978.32 Lee Y S, Nordin M, Babu S S, et al. Welding Journal,2014,(93),292.33 He X, Mazumder J. Journal of Applied Physics 2007,101,053113. 34 Kong F, Kovacevic R. Metallurgical & Materials Transactions B,2010,41(6),1310.35 Gan Z T, Yu G, He X L, et al. International Communications in Heat and Mass Transfer,2017,86,206.36 Acharyar R, Bansalr R, Gambone J J, et al. Metallurgical and Materials Transactions B,2014,45(6),2247.37 Manvatkar V, De A, Debroy T. Materials Science and Technology,2015,31(8),924.38 Chatterjee D, Chakraborty S. Physics Letters A,2006,351(4-5),359.39 Geiger M, Leitz K H, Koch H, et al. Production Engineering,2009,3(2),127.40 Zhao Lin, Tsukamoto Susumu, Arakane Goro, et al. Chinese Laser,2015(4),210(in Chinese).赵琳,塚本进,荒金吾郎,等.中国激光,2015(4),210.41 Cho W, Na S, Cho M, et al. Computational Materials Science,2010,49(4),792.42 Wei H L, Mazumder J, Debroyt. Scientific Reports,2015,5,16446.43 Zhou J, Tsai H L. Journal of Physics D: Applied Physics,2009,42(9),95502.44 Fallah V, Amoorezaei M, Provatas N, et al. Acta Materialia,2012,60(4),1633.45 Yin H, Felicelli S D. Acta Materialia,2010,58(4),1455.46 Wei L, Lin X,Wang M, et al. Acta Physica Sinica,2015,64(1),348(in Chinese).魏雷,林鑫,王猛,等.物理学报,2015,64(1),348.47 Zhang Dongyun, Wu Rui, Zhang Huifeng, et al. Chinese Laser,2015,42(5),104(in Chinese).张冬云,吴瑞,张晖峰,等.中国激光,2015,42(5):104.48 Song Jianli, Li Yongtang, Deng Qilin, et al. Journal of Mechanical Engineering,2010,46(14),29(in Chinese).宋建丽,李永堂,邓琦林,等.机械工程学报,2010,46(14),29.49 Liu Hao, Yu Gang, He Xiuli, et al. Chinese Laser,2013,40(12),78(in Chinese).刘昊,虞钢,何秀丽,等.中国激光,2013,40(12),78.50 Deng Zhenbo, Mei Xiaoqin, Xiang Zhaowei,et al. Journal of Sichuan University(Engineering Science Edition),2016,48(2),165 (in Chinese).邓珍波,梅筱琴,向召伟,等.四川大学学报(工程科学版),2016,48(2),165.51 Huang Y L, Liang G Y, Su J Y. Acta Metallurgica Sinica (English Letters),2004,17(1),21.52 Zuo Tiechuan. The Advanced Manufacturing in the 21st Century-Laser Technology and Engineering, Science Press,2007(in Chinese).左铁钏.21世纪的先进制造-激光技术与工程,科学出版社,2007.