高熵非晶合金设计、制备及性能的研究进展

doi:10.11896/cldb.20120197

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2361KB)
Export: BibTeX | EndNote (RIS)

Abstract High-entropy metallic glasses High-entropy metallic glasses are an emerging class of materials that show promising potential forvarious engineering applications because of their advantageous characteristics of high-entropy alloy composition and amorphous alloy structure. Owing to their excellent mechanical and physical properties, these metallic glasses have recently attracted increased attention. Research on related high-entropy metallic glasses is still in its infancy. In this study, the bases for designing the composition of high-entropy metallic glasses are introduced, and the effects of key physical parameters, such as mixing entropy (ΔS_mix), mixing enthalpy (ΔH_mix), and atomic mismatch (δ), on the microstructures of high-entropy metallic glasses are comprehensively analyzed. Moreover, the current status of the study of alloys systems, preparation methods, and mechanical and physical properties is discussed and summarized. Material systems of high-entropy metallic glasses that have been developed remain limited. Current methods for preparing high-entropy metallic glasses have inherited the characteristics of those for preparing amorphous alloys and high-entropy alloys. These methods can be roughly divided into liquid-phase preparation, gas-phase preparation, and solid-phase preparation. Owing to their excellent thermodynamic properties, high-entropy amorphous materials are expected to break through the size limit through thermal spraying and achieve large-scale applications. Research on the properties of high-entropy metallic glasses mainly focuses on mechanical properties, corrosion resistance, magnetic properties, amorphous-forming ability, and thermal stability. Among these topics of interest, the influence of high-entropy on the amorphous formation, structure, thermodynamic properties, and abnormal thermal stability of high-entropy metallic glasses must be urgently resolved. Potential topics on studies of material systems of high-entropy metallic glasses on the basis of the concept of material genetic engineering are explored. The application prospects of such materials are also discussed.

Key words： high-entropy metallic glasses physical parameters material systems properties

Published: 26 September 2021

CLC number:

TG139+.8

Fund:National Key R&D Program of China (2018YFC1902400)and National Natural Science Foundation of China (51975582).

About author:: Kai Chong,received his B.S. degree in material forming and control engineering major from Qilu University of Technology in 2016. He is currently pursuing his Ph.D. at the School of materials science and engineering, Shandong University. His research has focused on high entropy amorphous alloys with high crystallization temperature.
Xiubing Liang, director, researcher and doctoral supervisor of the Frontier Cross Technology Research Center of the National Defense Science and Technology Innovation Institute of the Academy of Military Sciences. He has long been engaged in scientific research on new metastable materials and has undertaken a number of key projects such as the National Key Research and Development Plan, the National 863 Plan, the National Natural Science Foundation, and so on. He won 3 national awards, obtained 35 patents, published 4 books, and published more than 200 papers. He won the China Science and Technology Association Qiu Shi Award and China Youth Science and Technology Award, was selected by the Ministry of Education New Century Outstanding Talent Support Program and the National Ten Million Talent Project, and was awarded the title of young and middle-aged expert with outstanding contributions, and won the special allowance of the State Council.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHONG Kai
	ZHANG Zhibin
	ZOU Yong
	LIANG Xiubing

Cite this article:

CHONG Kai,ZHANG Zhibin,ZOU Yong, et al. Research Progress on the Design, Preparation and Properties of High-entropy Metallic Glasses[J]. Materials Reports, 2021, 35(17): 17019-17025.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20120197 OR http://www.mater-rep.com/EN/Y2021/V35/I17/17019

1 Takayama S. Journal of Materials Science, 1976, 11(1), 164.
2 Greer A L. Nature, 1993, 366(6453),303.
3 Cantor B, Chang I T H, Knight P, et al. Materials Science & Engineering A, 2004, 375-377(1-2), 213.
4 Yeh J W, Chen S K, Lin S J, et al. Advanced Engineering Materials, 2004, 6(5), 299.
5 Ma L Q, Wang L M, Zhang T, et al. Materials Transactions, 2002, 43(2), 277.
6 Zhao K, Xia X X, Bai Y H, et al. Applied Physics Letters, 2011, 98(14), 141913.
7 Gludovatz B, Hohenwarter A, Catoor D, et al. Science, 2014, 345(6201), 1153.
8 Zhang Y, Zuo T T, Tang Z, et al. Progress in Materials Science, 2014, 61, 1.
9 Yeh J W. U.S. patent,US20020159914 A1. 2002.
10 Turnbull D. Contemporary Physics, 1969, 10(5), 473.
11 Inoue A, Zhang T. Journal of Non-Crystalline Solids, 1993, 156-158(2), 473.
12 Inoue A. Acta Materialia, 2000, 48(1), 279.
13 Wriedt H A. American Society for Metals, 1990, 2, 1739.
14 Senkov O N. Journal of Non-Crystalline Solids, 2003, 317(1), 34.
15 Senkov O N, Scott J M. Scripta Materialia, 2004, 50(4), 449.
16 Lu Z P, Liu C T. Acta Materialia, 2002, 50(13), 3501.
17 Wang Y M, Qiang J B, Wong C H, et al. Journal of Materials Research, 2003, 18(3), 642.
18 Wang D, Li Y, Sun B B, et al. Applied Physics Letters, 2004, 84(20),4029.
19 Zhang Y, Zhou Y, Lin J, et al. Advanced Engineering Materials, 2008, 10(6),534.
20 Guo S, Liu C T. Progress in Natural Science: Materials International, 2011, 21(6), 433.
21 Xu Y Q, Li Y, Zhu Z, et al. Journal of Non-Crystalline Solids, 2018, 487(1), 60.
22 Fujita T, Konno K, Zhang W, et al. Physical Review Letters, 2009, 103(7), 075502.
23 Yang X, Zhang Y. Materials Chemistry & Physics,2012,132(2-3),233.
24 Egami T. MRS Proceedings, 2002, 754(1), 30.
25 Li R. Study on amorphous phase formation in Ti-Zr-Hf-M high entropy alloys. Master’s Thesis, Shenzhen University, China, 2016(in Chinese).
李瑞. TiZrHf系多主元高熵非晶的形成研究.硕士学位论文, 深圳大学, 2016.
26 Zhang Y,Gao M C, Yeh J W, et al. High-entropy alloys, Springer International Publishing, Switzerland, 2016.
27 Wang H D, Liu J N, Xing Z G, et al. Surface Engineering, 2019, 36(1), 1.
28 Sang L, Xu Y. Journal of Non-crystalline Solids, 2020, 530, 119854.
29 Wang F, Inoue A, Kong F L, et al. Journal of Alloys and Compounds, 2018, 732, 637.
30 Takeuchi A, Gao M C, Qiao J, et al. High-entropy metallic glasses, Springer International Publishing, Switzerland, 2016.
31 Yang M, Liu X J, Wu Y, et al. Scientia Sinica Physica, Mechanica & Astronomica, 2020, 50(6), 21(in Chinese).
杨铭,刘雄军, 吴渊, 等. 中国科学:物理学力学天文学,2020,50(6),21.
32 Wu K, Liu C, Li Q, et al. Journal of Magnetism and Magnetic Mate-rials, 2019, 489, 165404.
33 Takeuchi A, Chen N, Wada T, et al. Intermetallics,2011,19(10),1546.
34 Gao X Q, Zhao K, Ke H B, et al. Journal of Non-Crystalline Solids, 2011, 357(21), 3557.
35 Ding H Y, Yao K F. Journal of Non-Crystalline Solids, 2013, 364, 9.
36 Jinyeon K, Seok O H, Jinwoo K, et al. Acta Materialia,2018,155,350.
37 Wei D D, Chen Q J, Gao J W, et al. Rare Metal Materials and Enginee-ring, 2009, 38(A01),80(in Chinese).
魏丹丹, 陈庆军, 高霁雯, 等. 稀有金属材料与工程, 2009, 38(A01), 80.
38 Ma X L,Zhou Y,Liu Y D. Heat Treatment Technology and Equipment, 2015, 36(4), 22(in Chinese).
马晓琳, 周勇, 刘玉栋. 热处理技术与装备, 2015, 36(4), 22.
39 Li Y, Wang S, Wang X, et al. Journal of Materials Science & Technology, 2020, 43, 32.
40 Wu L, Zhao Y, Li J J, et al. Journal of Iron and Steel Research International, 2018, 25,1.
41 Zheng S, Cai Z, Pu J, et al. Applied Surface Science, 2019, 483, 870.
42 Sheng W, Yang X, Wang C, et al. Entropy, 2016, 18(6), 226.
43 Cohen M H, Turnbull D. Nature, 1961, 189(4759), 131.
44 Gao X Q, Wang W H, Bai H Y, et al. Journal of Materials Science & Technology, 2014, 30(6), 546.
45 Takeuchi A, Wang J Q, Chen N, et al. Materials Transactions, 2013, 54(5), 776.
46 Wu J, Zhou Z Y, Yang H, et al. Journal of Alloys and Compounds, 2020, 827, 154298.
47 张显程, 程江波, 葛云云, 等. 中国专利, CN 110699629 A, 2020.
48 Xu Y, Chen Y. Chinese patent, CN201610090111.5, 2016.
徐轶,陈亚. 中国专利, CN201610090111.5, 2016.
49 Zhao S, Wang H, Xiao L, et al. Physica E: Low-dimensional Systems and Nanostructures, 2017, 94, 100.
50 Liu L, Zhu J B, Hou C, et al. Materials & Design, 2013, 46(4), 675.
51 Hsueh H T, Shen W J, Tsai M H, et al. Surface and Coatings Technology, 2012, 206(19-20), 4106.
52 Lin C H, Duh J G, Yeh J W. Surface and Coatings Technology, 2007, 201(14), 6304.
53 Lv J, Chen X M, Huang D Y, et al. Materials Reports, 2006, 20(9), 93(in Chinese).
吕俊, 陈晓闽, 黄东亚, 等. 材料导报, 2006, 20(9), 93.
54 Wang J, Zheng Z, Xu J, et al. Journal of Magnetism & Magnetic Mate-rials, 2014, 355, 58.
55 Shu C, Chen K, Yang H, et al. Physica B Condensed Matter, 2019, 571, 235.
56 Shu F Y, Liu S, Zhao H Y, et al. Journal of Alloys and Compounds, 2017, 731, 662.
57 Cheng J B, Sun B, Ge Y, et al. Surface & Coatings Technology, 2020, 402, 126321.
58 Cheng J B, Sun B, Ge Y, et al. Surface & Coatings Technology, 2020, 402, 126320.
59 Li C, Li Q, Li M, et al. Journal of Alloys & Compounds, 2019,791, 947.
60 Zhao S F, Yang N G, Ding Y H, et al. Intermetallics, 2015, 61, 47.
61 Zhao S F, Shao Y, Liu X, et al. Materials & Design, 2015, 87, 625.
62 Ding J, Inoue A, Han Y, et al. Journal of Alloys & Compounds, 2017, 696, 345.
63 Huo J, Huo L, Men H, et al. Intermetallics, 2015, 58, 31.
64 Qi T L, Li Y H, Takeuchi A, et al. Intermetallics, 2015, 66, 8.
65 Wei R, Tao J, Sun H, et al. Materials Letters, 2017, 197, 87.
66 Inoue A, Nishiyama N, Kimura H. Materials Transactions,1997,38(2),179.
67 Peker A, Johnson W L. Applied Physics Letters, 1993, 63(17), 2342.
68 Yang M, Liu X J, Ruan H H, et al. Materials Research Letters, 2018, 6(9), 495.
69 Ding H Y, Shao Y, Gong P, et al. Materials Letters,2014,125(15),151.
70 Yang M. The glass formation, thermal stability and crystallization beha-vior for Zr-Ti-Cu-Ni-(Hf, Be) high-entropy bulk metallic glasses. Ph.D. Thesis. University of Science and Technology Beijing, China, 2019(in Chinese).
杨铭. Zr-Ti-Cu-Ni-(Hf-Be)高熵非晶合金形成、热稳定性及晶化行为研究. 博士学位论文.北京科技大学, 2019.
71 Hung S B, Wang C J, Chen Y Y, et al. Surface & Coatings Technology, 2019, 375, 802.
72 Cheng C,Yeh J W. Materials Letters, 2016, 181, 223.