钢网片-聚乙烯纤维增强水泥基复合材料中低速动态拉伸性能试验研究

doi:10.11896/cldb.20120031

Abstract
Figure/Table
References
Related Citation (5)

Download:

Full Text ( PDF ) (5570KB)
Export: BibTeX | EndNote (RIS)

Abstract The dynamic tensile tests of the steel grid-polyethylene (PE) fiber reinforced engineered cementitious composites (ECC) were carried out at low and medium loading rates.The failure state and characteristic of tensile strength and energy dissipation of the steel grid-PE fiber reinforced ECC were investigated. The effects of fiber volume content, number of steel grid layers and tensile rate on the dynamic tensile behaviors of the steel grid-PE fiber reinforced ECC were also investigated. It is indicated by the test results that: the ultimate tensile strength, ductility and energy dissipation performance of the ECC are improved by the addition of steel grids and PE fibers. Compared to the matrix material, the steel grid-PE fiber reinforced ECC shows remarkable improvement phenomena of ultimate tensile strength and energy dissipation. The steel grid mostly enhances the ultimate tensile strength of the ECC, and the PE fiber mostly improves the ductility and energy dissipation performance of the ECC. The fiber volume content, number of steel grid layers and tensile rate all impact the dynamic tensile behaviors of the steel grid-PE fiber reinforced ECC to a certain extent. The ultimate tensile strength and energy dissipation performance of the reinforced ECC can be enhanced with the increase of fiber volume content. For the tensile rate of 1mm/min, an increase of about 17% is recorded for the peak stress of the reinforced ECC with a fiber volume content of 0.5% compared to the matrix material. The ultimate tensile strength of the reinforced ECC reveals remarkable enhancement with the increase of the number of steel grid layers. The peak stress of the reinforced ECC with one layer or two layers of steel grid increases by about 65% and 192% compared to the matrix material, respectively. But the deformation capability of the reinforced ECC shows deterioration with the increase of the number of steel grid layers. The ultimate tensile strength of the reinforced ECC can be enhanced with the increase of tensile rate. The reinforced ECC reveals obvious strain hardening behavior and has considerable ductility and energy dissipation performance at medium tensile rates.

Key words： engineered cementitious composites steel grid polyethylene (PE) fiber dynamic tensile behavior energy dissipation

Published: 10 March 2022 Online: 2022-03-08

CLC number:

TU528.585

Fund:National Natural Science Foundation of China (52078288) and the Beijing Municipal Natural Science Foundation (8212001).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Liang
	LUAN Yiheng
	WU Jun
	DU Xiuli
	WU Wenjie

Cite this article:

LI Liang,LUAN Yiheng,WU Jun, et al. Test Study on Dynamic Tensile Behaviors of Steel Grid-Polyethylene Fiber Reinforced Engineered Cementitious Composites at Low and Medium Loading Rates[J]. Materials Reports, 2022, 36(5): 20120031-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20120031 OR http://www.mater-rep.com/EN/Y2022/V36/I5/20120031

1 Li V C.Journal of Advanced Concrete Technology, 2003, 1(3),215.
2 She Wei, Zhang Yunsheng, Sun Wei, et al. Chinese Journal of Rock Mechanics and Engineering, 2011, 30(Supp.1),2777(in Chinese).
佘伟, 张云升, 孙伟, 等.岩石力学与工程学报, 2011, 30(Supp.1),2777.
3 Tran T K, Kim D J.Cement and Concrete Research, 2013, 50,62.
4 Kim J S, Cho C G, Moon H J, et al. International Journal of Concrete Structures and Materials, 2017, 11(4),647.
5 Xu Shilang, Cai Xiangrong. Journal of Hydraulic Engineering, 2009, 40(9),1055(in Chinese).
徐世烺, 蔡向荣.水利学报, 2009, 40(9),1055.
6 Deng Zongcai, Xue Huiqing, Li Pengyuan, et al. Journal of Beijing University of Technology, 2009, 35(9),1204(in Chinese).
邓宗才, 薛会青, 李朋远, 等.北京工业大学学报, 2009, 35(9),1204.
7 Li Yan, Liu Zejun, Liang Xingwen.Engineering Mechanics, 2013, 30(1),322(in Chinese).
李艳, 刘泽军, 梁兴文.工程力学, 2013, 30(1),322.
8 Sun M, Chen Y Z, Zhu J Q, et al. Materials, 2019, 12(1),37.
9 Yang Huixian, Huang Yansheng, Li Jing.Engineering Mechanics, 2016, 33(7),144(in Chinese).
杨惠贤, 黄炎生, 李静. 工程力学, 2016, 33(7),144.
10 Zhang Shui, Li Guozhong, Chen Juan, et al. Acta Materiae Compositae Sinica, 2011, 28(3),109(in Chinese).
张水, 李国忠, 陈娟, 等.复合材料学报, 2011, 28(3),109.
11 Toutanji H A, Elkorchi T, Katz R N, et al. Cement and Concrete Research, 1993, 23(3),618.
12 Tan Guojin, Zhu Deqi, Wu Chunli, et al. Journal of Jilin University (Engineering and Technology Edition). https://doi.org/10.13229/j.cnki.jdxbgxb20190914(in Chinese).
谭国金, 朱德祺, 吴春利, 等.吉林大学学报(工学版). https://doi.org/10.13229/j.cnki.jdxbgxb20190914.
13 Zhang Yunhua, Yao Liping, Xu Shijin, et al. Acta Materiae Compositae Sinica, 2017, 34(5),1159(in Chinese).
张运华, 姚丽萍, 徐仕进, 等.复合材料学报, 2017, 34(5),1159.
14 Zhang Na, Zhou Jian, Xu Mingfeng, et al. Explosion and Shock Waves.http://kns.cnki.net/kcms/detail/51.1148.O3.20200325.1432.026.html(in Chinese).
张娜, 周健, 徐名凤, 等.爆炸与冲击. http://kns.cnki.net/kcms/detail/51.1148.O3.20200325.1432.026.html.
15 Zhao Huanqi, Li Guozhong.Acta Materiae Compositae Sinica, 2014, 31(1),140(in Chinese).
赵焕起, 李国忠.复合材料学报, 2014, 31(1),140.
16 Sun Weiwei, Zhang Zhengyang, Dong Haolin, et al. Concrete, 2016(12),86(in Chinese).
孙巍巍, 张正洋, 董浩林, 等.混凝土, 2016(12),86.
17 Wang Z B, Zhang J, Wang J H, et al. Journal of Composite Materials, 2015, 49(18),2169.
18 Han Shicheng, Zhang Cong, Hua Yuan. Bulletin of the Chinese Ceramic Society, 2019, 38(1),77(in Chinese).
韩世诚, 张聪, 华渊.硅酸盐通报, 2019, 38(1),77.
19 Ali M, Soliman A M, Nehdi M L.Materials and Design, 2017, 117,139.
20 Zhou Y W, Xi B, Yu K Q, et al. Materials, 2018, 11(8),1448.
21 Zhang W, Yin C L, Ma F Q, et al. Materials, 2018, 11(7),1147.
22 Xu Shilang, Li Qinghua, Li Hedong. China Civil Engineering Journal, 2007, 40(12),69(in Chinese).
徐世烺, 李庆华, 李贺东. 土木工程学报, 2007, 40(12),69.
23 Zhu Z F, Wang W W, Harries K A, et al. Journal of Composites for Construction, 2018, 22(6),163.
24 Deng Anzhong, Yuan Wang, Xie Ya, et al. Journal of Functional Materials and Devices, 2019, 25(4),247(in Chinese).
邓安仲, 袁旺, 解亚, 等.功能材料与器件学报, 2019, 25(4),247.
25 Li L, Liu W L, Wu J, et al. Materials, 2019, 12(17),2666.