智能自修复材料研究进展

doi:10.11896/cldb.20110101

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (5190KB)
Export: BibTeX | EndNote (RIS)

Abstract Typical failures of mechanical parts are all derived from the early micro-damages on the surface of materials. Parts in service under the conditions of wear, corrosion, fatigue and other conditions often cause overall failure due to local damages to the materials surface, and eventually lead to equipment failure or even catastrophic consequences. The phase, microstructure, mechanical property and service behavior of traditio-nal engineering materials are determined after the chemical component and preparation technology are determined. And it is hard to satisfy the new requirements of extreme working conditions, high reliability and long service life.
The biological system can heal its own damage by self-repairing, and help organisms recover and extend life. In recent years, intelligent self-healing materials and technologies, inspired by the process of self-repairing and self-healing of biological damage, on the basis of the cross fusion of intelligent materials, advanced surface technology and bionic science and information technology, integrating damage perception and stimulation, state intelligent diagnosis and online repairing and healing, have been developed.And a new solution is provided to solve the problems of early micro-damage repair of materials and improve the operation efficiency, reliability and service life of engineering systems.
After decades of research and development, self-healing materials have covered many fields, such as concretes, polymers, ceramics, metals and so on. The damage modes targeted by the self-healing process also include wear, corrosion and fatigue. The research in this field involves the design of self-healing materials, the construction of self-healing system, the evaluation of self-healing performance and the mechanism of self-healing. It has become a hot research direction of interdisciplinary integration.
In this review, the classification and basic principle of typical self-healing materials systems are introduced. The research progress of self-hea-ling materials for three typical damage failure modes of wear, fatigue and corrosion are summarized, and the current problems and future development trends in this field are analyzed.

Key words： self-healing wear fatigue corrosion composite materials

Published: Online: 2022-04-07

CLC number:

TB381

Fund:National Natural Science Foundation of China (52075544) and the National Basic Research Program of China (2017YFB0310703).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Zhong
	LYU Xiaoren
	YU Helong
	XU Binshi

Cite this article:

ZHANG Zhong,LYU Xiaoren,YU Helong, et al. Research Progress of Intelligent Self-healing Materials[J]. Materials Reports, 2022, 36(7): 20110101-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20110101 OR http://www.mater-rep.com/EN/Y2022/V36/I7/20110101

1 Minkin J. Journal of the Franklin Institute, 1951, 252(1), 93.
2 Murphy E B, Wudl F. Progress in Polymer Science,2010,35(1-2),223.
3 White S R, Sottos N R, Geubelle P H, et al. Nature,2001,409(6822),794.
4 Blaiszik B J, Kramer S L B, Olugebefola S C, et al. Annual Review of Materials Research, 2010, 40(1), 179.
5 Li P, Zou T, Liu Y, et al. In: Proceedings of the 2015 International Conference on Mechatronics, Electronic, Industrial and Control Enginee-ring. Shenyang, 2015, pp. 427.
6 Qi H Z, Zhao Y H, Zhu K Y, et al. Progress in Chemistry, 2011, 23(12), 2560(in Chinese).
祁恒治, 赵蕴慧, 朱孔营, 等. 化学进展, 2011, 23(12), 2560.
7 Li Q, Liu C, Wen J, et al. Chinese Chemical Letters,2017,28(9),1857.
8 Li H Y, Zhang L B, Li J, et al. Chemical Industry and Engineering Progress, 2014, 33(1), 133.
李海燕, 张丽冰, 李杰, 等. 化工进展, 2014, 33(1), 133.
9 Wang Y, Li Y, Zhang Z, et al. Applied Ences, 2019, 9(19), 4098.
10 Kilicli V, Yan X J, Salowitz N, et al. Jom, 2018, 70(6), 846.
11 Manuel M V, Olson G B. In: Paper Presented at the 1st International Conference on Self-Healing Materials, Noordwijik aan Zee, the Netherlands, 2007, pp.18.
12 Lucci J M, Amano R S, Rohatgi P K. Heat and Mass Transfer, 2017, 53 (3), 825.
13 Lumley R, Morton A, Polmear I. Acta Materialia,2002,50(14),3597.
14 Ruzek A C. Synthesis and characterization of metallic systems with potential for self-healing. Ph.D. Thesis, University of Wisconsin-Milwaukee, USA, 2009.
15 Zhang J, Liu Y, Feng T, et al. Construction & Building Materials, 2017, 148(1), 610.
16 Huseien G F, Shah K W, Sam A R M. Journal of Building Engineering, 2019, 23, 155.
17 Zhou M, Lu W, Liu X, et al. Tribology International, 2018, 118, 196.
18 Derelioglu Z, Carabat A L, Song G M, et al. Journal of the European Ceramic Society, 2015, 35(16), 4507.
19 Nozahic F, Monceau D, Estournès C. Materials & Design,2016,94,444.
20 Boatemaa L, Bosch M, Farle A S, et al. Journal of the American Ceramic Society, 2018, 101(12), 5684.
21 Greil P. Advanced Engineering Materials, 2020, 22(9), 1901121.
22 Xu Y, Yu H L, Zhao Y, et al.China Surface Engineering, 2009, 22(3), 58(in Chinese).
许一, 于鹤龙, 赵阳, 等. 中国表面工程, 2009, 22(3), 58.
23 Yu H L, Xu Y, Shi P J, et al. Tribology, 2012, 32(5),500(in Chinese).
于鹤龙, 许一, 史佩京, 等. 摩擦学学报, 2012, 32(5), 500.
24 Yu H L, Xu Y, Shi P J, et al.Wear, 2013, 297(1-2), 802.
25 Bai Z N, Li G J, Zhao F Y, et al. Lubricants, 2020, 8(10), 93.
26 Yu H L, Wang H M, Yin Y L, et al. Tribology International, 2021, 153, 106562.
27 Shirani A, Gu J, Wei B, et al. Surface and Coatings Technology, 2019, 364, 273.
28 Zou J, Zhang G J, Zhang H, et al. Ceramics International, 2013, 39(1), 871.
29 Savchenko N L, Mirovoy Y A, Buyakov A S, et al. Wear, 2020, 446-447, 203204.
30 Zhai W, Lu W, Zhang P, et al. Applied Surface Science, 2018, 436, 1038.
31 Wu J, Wang X, Zhou L, et al. Industrial Lubrication and Tribology, 2018, 70(6), 1051.
32 Zhou H, Shi X, Liu X, et al. Journal of Materials Engineering and Performance, 2019, 28(2), 3381.
33 Abedini M, Ghasemi H M, Ahmadabadi M N. Materials Science and Technology, 2014, 26(3), 285.
34 Poormir M A, Khalili S M R, Eslami-Farsani R. Jom,2018,70(6),806.
35 Tanasi P, Hernández Santana M, Carretero-González J, et al. Polymer, 2019, 175, 15.
36 Cheng B, Lu X, Zhou J, et al. Dual Cross-Linked Acs Sustainable Che-mistry & Engineering, 2019, 7(4), 4443.
37 Wang X F, Zhang J H, Han R, et al. Journal of Cleaner Production, 2019, 235, 966.
38 Wei Z, Deng Y, Yu M, et al. Liquid Crystals, 2020, 21, 1.
39 Dry C. Ceram Trans, 1991, 16, 729.
40 Wang X, Huang Y, Huang Y, et al. Construction & Building Materials, 2019, 220, 90.
41 Li H M, Wu J, Zhang Y J. Applied Mechanics & Materials, 2013, 446-447, 1425.
42 Su Y, Feng J, Zhan Q, et al. Smart Materials & Structures, 2019, 28(7), 075041.
43 Xu H, Lian J, Gao M, et al. Materials, 2019, 12(14), 2313.
44 Feng J, Su Y, Qian C. Construction & Building Materials, 2019, 228, 116810.
45 Tittelboom K V, Belie N D, Muynck W D, et al. Cement & Concrete Research, 2010, 40(1), 157.
46 Muynck W D, Debrouwer D, Belie N D, et al. Cement & Concrete Research, 2008, 38(7), 1005.
47 Tavangarian F, Li G. Ceramics International, 2015, 41(2), 2828.
48 Fan W, Li W, Zhang Y, et al. Rsc Advances, 2017, 7(74), 46778.
49 Li J, Feng Q, Cui J, et al. Composite Science and Technology,2017,151(Otc.20),282.
50 Yabuki A, Urushihara W, Kinugasa J, et al. Materials and Corrosion, 2011, 62(10), 907.
51 Stankiewicz A, Szczygieł I, Szczygieł B. Journal of Materials Science, 2013, 48(23), 8041.
52 Xu J J, Yang T T, Yang Y, et al. Corrosion Science, 2018, 132, 161.
53 Wang C C, Li K Z, Shi X H, et al. Composites Part B,2017,125,181.
54 Walker L S, Corral E L. Journal of the American Ceramic, 2014, 97, 3004.
55 Yang H, Pei Y, Rao J, et al. Journal of Materials Chemistry, 2012, 22, 8304.