爆炸冲击诱发AISI304不锈钢马氏体微观形貌研究

doi:10.11896/cldb.20110061

Abstract
Figure/Table
References
Related Citation (12)

Download:

Full Text ( PDF ) (8889KB)
Export: BibTeX | EndNote (RIS)

Abstract Explosive shock loading on AISI304 stainless steel plates was experimentally carried out by explosive impact treatment. The evolution of microstructures, morphological features of martensites and its orientation of crystallography with matrix austenites in treated samples were respectively investigated by XRD, TEM and EBSD, and then martensite transformation induced by shock loading were discussed. Results showed that α martensites with a few ε martensites generated in austenite grain after explosive shock loading; α martensites were formed at deformation bands and its intersections; α martensite embryos were confined in deformation bands. Crystallographic orientations between α martensites and matrix austenite contained both K-S relation and Nishiyama relation. The ε martensites which had straight grain boundary were generated from stacking faults, and its crystallographic orientation with matrix austenite followed by relations of [110]_γ∥[1120]_ε and (0001)_ε∥(111)_γ. It can be concluded that the formations of the ε martensites are related to stacking faults, and α martensites are related to deformation bands, twins and its intersections.

Key words： AISI304 stainless steel explosive shock loading α martensites ε martensite

Published: Online: 2022-05-24

CLC number:

TG113.1

Fund:National Natural Science Foundation of China (12072067, 11672067),Independent Research Project of the State Key Laboratory of Structural Analysis of Industrial Equipment(S18314), and Scientific Research Project of Inner Mongolia University of Technology (BS2020002).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Huhe
	XINBA Yaer
	LI Xiaojie

Cite this article:

WANG Huhe,XINBA Yaer,LI Xiaojie. Study on Morphology of Martensites Transformation Induced by Explosive Shock Loading in AISI304 Stainless Steel[J]. Materials Reports, 2022, 36(10): 20110061-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20110061 OR http://www.mater-rep.com/EN/Y2022/V36/I10/20110061

1 Xu Z Y. Martensites transformation and martensites, Science Press, China, 1999(in Chinese).
徐祖耀.马氏体相变与马氏体, 科学出版社,1999.
2 Das A, Tarafder S, Chakraborti P C. Materials Science and Engineering A, 2011, 529(3), 9.
3 De A K, Murdock D C, Mataya M C, et al. Scripta Materialia, 2004, 50(12), 1445.
4 Huang C X, Yang G, Deng B, et al. Philosophical Magazine, 2007, 87(31), 4949.
5 Bracke L, Kestens L, Penning J. Scripta Materialia, 2007, 57 (5), 385.
6 Nagy E, Mertinger V, Tranta F, et al. Materials Science and Engineering A, 2004, 378(1-2), 308.
7 Hecker S S, Stout M G, Staudhammer K P, et al. Metallurgical Transactions A, 1982, 13(4), 619.
8 Lichtenfeld J A, Tyne C J V, Mataya M C. Metallurgical and Materials Transactions A, 2006, 37(1), 147.
9 Juho T, Pertti N, Gersom P, et al. Metallurgical and Materials Transactions A, 2005, 36(2), 421.
10 Rodríguez-Martínez J A, Pesci R, Rusinek A. Materials Science and Engineering: A, 2011, 528 (18), 5974.
11 Johnson K A, Murr L E, Staudhammer K P. Acta Metallurgica, 1985, 33(4), 677.
12 Das A, Sivaprasad S, Ghosh M, et al. Materials Science and Engineering A, 2008, 486(1-2), 283.
13 Murr L E, Staudhammer K P. Materials Science and Engineering, 1975, 20(1), 35.
14 Christou A, Brown N. Metallurgical Transactions, 1972, 3(4), 867.
15 Lee W S, Lin C F. Scripta Materialia, 2000, 43(8), 777.
16 Zhang H W, Liu G, Lu J, et al. Acta Metallrugica Sinica, 2003, 39(4), 347.
17 Meyers M A. Dynamic behavior of materials, Jon Wiley and Sons, New York, 1994.
18 Gnyusov S F, Rotshtein V P, Mayer A E, et al. Journal of Alloys and Compounds, 2017, 714, 232.
19 Shen Y F, Li X X, Sun X, et al. Materials Science and Engineering A, 2012, 552, 514.
20 Rodríguez-Martínez J A, Pesci R, Rusinek A. Materials Science and Engineering A, 2011, 528(18), 5974.
21 Huang C X, Yang G, Deng B, et al. Philosophical Magazine, 2007, 87(31), 4949.
22 Remington B A, Bazan G, Belak J, et al. Metallurgical and Materials Transactions A, 2004, 35(9), 2587.
23 Murr L E, Trillo E A, Bujanda A A, et al. Acta Materialia, 2002, 50(1), 121.
24 Huang C X, Yang G, Gao Y L, et al. Journal of Materials Research, 2007, 22(3), 724.
25 Yang G, Huang C X, Wu S D, et al. Acat Metallurgica Sinica, 2009, 45(8), 906 (in Chinese).
杨钢, 黄崇湘, 吴世丁,等.金属学报, 2009, 45(8), 906.
26 Aeberli K E, Pratt P L. Journal of Materials Science, 1985, 20(1), 316.
27 Atroshenko S A. Materials Science and Engineering A, 2004, 378(1-2), 293.
28 Zenji N. Martensitic transformation, Academic Press Inc. Ltd, London, 1978
29 Gerland M, Hallouin M. Journal of Materials Science, 1994, 4, 345.
30 Lee W S, Lin C F. Materials Science and Engineering A, 2001, 308, 124.
31 Zhang F, Feng X, Yang Z, et al. Scientific Reports, 2015, 5(8), 8981.
32 Hatano M, Kubota Y, Shobu T, et al. Philosophical Magazine Letters, 2016, 96 (6),1.
33 Ahn T H, Lee S B, Park K T. Materials Science and Engineering A, 2014, 598, 56.
34 Bruno O, Vaynblat D. Mathematical and Computer Modelling, 2001, 34 (12-13), 1261.
35 Gussev M N, Field K G, Busby J T. Journal of Nuclear Materials, 2014, 446 (1-3), 187.