管件内壁电沉积涂层技术的研究进展

doi:10.11896/cldb.20100118

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2899KB)
Export: BibTeX | EndNote (RIS)

Abstract The electrodeposition technique is widely adopted for the inner wall modification and protection for pipe workpieces, especially for those with complex geometry. This technique is possessed of the following advantages of simple facilities required, dense coatings, controllable composition and thickness, and good platability, etc. However, compared with the technique for the outer surface treatment, greater challenges will emerge for the inner wall electrodeposition of pipe workpieces, such as large area ratio of cathode/anode, difficulty in coating the inner corners, inhomogeneity of coating thickness, and existence of local overheating or temperature gradation, etc. In order to obtain homogenous and dense coatings in the engineering practice, a fine designed conformable anode and appropriate treating method prior to plating are commonly employed, accompanied by optimizing the electrodeposition parameters like the current density, current efficiency, electrolyte temperature and stirring rate, etc. The characteristics, influence factors and engineering applications of inner wall electrodeposition technique of pipe workpieces are thus reviewed, expecting to provide some reference and guideline for related fundamental research and engineering practice.

Key words： pipe workpiece inner walls electrodeposition influence factor conformable anode

Published: 10 July 2022 Online: 2022-07-12

CLC number:

TL214+.6

Fund:National MCF Energy R & D Program (2018YFE0313100, 2017YFE0300304), the National Natural Science Foundation of China (11975213) and the State Key Laboratory on Surface Physics and Chemistry Foundation (WDZC202105).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	XIANG Xin
	YANG Feilong
	ZHANG Guikai
	HU Li
	SONG Yaqi
	ZHU Ligui

Cite this article:

XIANG Xin,YANG Feilong,ZHANG Guikai, et al. Research Status of Electrodeposition Coating Technique for Inner Walls of Pipe Workpieces[J]. Materials Reports, 2022, 36(13): 20100118-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20100118 OR http://www.mater-rep.com/EN/Y2022/V36/I13/20100118

1 Zhao Y H, Jia Y, Yu B H,et al. Surface Technology, 2014, 43(2), 118 (in Chinese).
赵彦辉, 贾莹, 于宝海, 等. 表面技术, 2014, 43(2), 118.
2 Zhang Y, Liu Y, Zhou Z, et al. IOP Conference Series: Materials Science and Engineering, 2017, 230, 012018.
3 Igolkin A I, Zelenin Y V. Chemical and Petroleum Engineering, 2009, 45(3-4), 251.
4 Xue D, Chen Y, Ling G, et al. Fusion Engineering and Design, 2015, 101, 128.
5 Ensinger W, Lensch O, Kraus T, et al. Surface & Coatings Technology, 2002, 150, 227.
6 Baba K, Hatada R. Surface & Coatings Technology, 2000, 128-129, 112.
7 Ayata S, Ensinger W. Surface & Coatings Technology, 2018, 340, 121.
8 Meng J, Yang X T, Zhang J H, et al. Physics Procedia, 2012, 32, 865.
9 Berreth K, Maile K, Lyutovich A. Materials and Corrosion, 2005, 56(12), 916.
10 黄绍松, 刘宇, 赵纪军, 等. 中国专利, CN201810057645.7, 2018.
11 Xiong Y, Gao H, Ren N, et al. Plasma Science & Technology, 2018, 20, 035507.
12 Barton I, Matejec V, Mrazek J, et al. Journal of Sol-Gel Science and Technology, 2017, 81, 867.
13 Fan H L. The method research on preparation coating by powder electric spraying on the inner surface of tube.Master's Thesis, Lanzhou University of Technology,China, 2017 (in Chinese).
范宏林. 粉末电爆喷涂用于管内壁涂层制备方法的研究. 硕士学位论文, 兰州理工大学, 2017.
14 Tian Z, Zhang G, Huang W, et al. Key Engineering Materials, 2013, 537, 279.
15 Hu Z, Wang H, Zhu Y, et al. AIChE Journal, 2017, 63(9), 3636.
16 Du H, Song G, Nakajima H, et al. Applied Surface Science, 2013, 264, 772.
17 Xiang X, Yang F, Zhang G, et al. Coatings, 2019, 9, 95.
18 Hu L, Zhang G, Wang H, et al. Fusion Engineering and Design, 2019, 148, 111280.
19 Wei B J, Hu L, Xiang X, et al. Acta Physica Sinica, 2021,70(3), 208 (in Chinese).
韦炳军, 胡立, 向鑫, 等. 物理学报, 2021,70(3), 208.
20 Li F, Wu Y, Hu R N. Plating and Finishing, 2011, 33(10), 17 (in Chinese).
李峰, 吴欲, 胡如南. 电镀与精饰, 2011, 33(10), 17.
21 Xie H B, Zhang L X. Electroplating & Pollution Control, 2004, 24(6), 20 (in Chinese).
谢洪波, 张来祥. 电镀与环保, 2004, 24(6), 20.
22 Chen B. Basic research on the application of crack-free hard chromium electroplating. Master's Thesis, Nanjing University of Aeronautics and Astronautics,China, 2017 (in Chinese).
陈斌. 无裂纹电镀硬铬应用基础研究. 硕士学位论文, 南京航空航天大学, 2017.
23 Hu R H, Huo D Y. Electroplating & Finishing, 2017, 36(13), 711 (in Chinese).
胡瑞华, 霍大勇. 电镀与涂饰, 2017, 36(13), 711.
24 Xi B. Electroplating & Pollution Control, 2012, 32(6), 49 (in Chinese).
奚兵. 电镀与环保, 2012, 32(6), 49.
25 Yang B, Leu M C. US patent, US6409902, 2002.
26 Yang D C, Yun N Z. New Technology & New Process, 2004(2), 33 (in Chinese).
杨大春, 云乃彰. 新技术新工艺, 2004(2), 33.
27 Yang J M, Zhu D, Wang K. Electromachining & Mould, 2004(5), 23 (in Chinese).
杨建明, 朱荻, 王昆. 电加工与模具, 2004(5), 23.
28 Yang J M, Zhu D, Wang K. Machine Design and Research, 2004, 20(5), 56 (in Chinese).
杨建明, 朱荻, 王昆. 机械设计与研究, 2004, 20(5), 56.
29 Ren G P, An C Q, Tong W, et al. Plating and Finishing, 2016, 38(7), 32 (in Chinese).
任国鹏, 安成强, 佟威, 等. 电镀与精饰, 2016, 38(7), 32.
30 Li W Q. Plating and Finishing, 2014, 36(7), 33 (in Chinese).
李卫权. 电镀与精饰, 2014, 36(7), 33.
31 Li J D, Xuan M, Wu Y H,et al. Journal of Functional Materials Devices, 2008, 14(2), 336 (in Chinese).
李加东, 宣明, 吴一辉, 等. 功能材料与器件学报, 2008, 14(2), 336.
32 Zhang Q H, Wu Z C, Wang Q G. Journal of Ordnance Engineering College, 2006(18), 25 (in Chinese).
张庆海, 武占成, 王庆国. 军械工程学院学报, 2006(18), 25.
33 Yang J M. Materials Protection, 2010, 43(4), 38 (in Chinese).
杨建明. 材料保护, 2010, 43(4), 38.
34 Oh Y J, Chung S H, Lee M S. Materials Transactions, 2004, 45(10), 3005.
35 Ge X R. Electro Brush Plating Technology, 1995(1), 1 (in Chinese).
葛祥荣. 电刷镀技术, 1995(1), 1.
36 Yuan S P. Electroplating & Finishing, 2009, 28(4), 40 (in Chinese).
袁诗璞. 电镀与涂饰, 2009, 28(4), 40.
37 Li Y, Li J S. Pretreatment and post treatment of electroplating, Chemical Industry Press, China, 2009, pp.1 (in Chinese).
李异, 李建三. 电镀前处理与后处理, 化学工业出版社, 2009, pp.1.
38 Qu H L. Electroplating & Finishing, 2009, 28(9), 28 (in Chinese).
琚红亮. 电镀与涂饰, 2009, 28(9), 28.
39 Zhang F, Wang X H, Xiao Y K. Electroplating & Finishing, 2005, 24(10), 20 (in Chinese).
张峰, 王旭辉, 肖耀坤. 电镀与涂饰, 2005, 24(10), 20.
40 Zhang G K. Research on aluminide tritium permeation barriers by the method of aluminium plating in room temperature molten salts combined with oxidation. Master's Thesis, China Academy of Engineering Physics,China, 2010 (in Chinese).
张桂凯. 室温熔盐镀铝-氧化法制备铝化物阻氚层技术研究. 硕士学位论文, 中国工程物理研究院, 2010.
41 Xiang G P. Theory and application of pulse electroplating, Tianjin Science Press, China, 1989, pp.1 (in Chinese).
向国朴. 脉冲电镀的理论与应用, 天津科学出版社, 1989, pp.1.
42 Yang C C. Materials Chemistry and Physics, 1994, 37(4), 335.
43 Du L Q, Liu H J, Qin J,et al. Optics and Precision Engineering, 2007, 15(1), 69 (in Chinese).
杜立群, 刘海军, 秦江, 等. 光学精密工程, 2007, 15(1), 69.
44 Wang Z X, Wang S, Yang Z, et al. International Journal of Surface Science and Engineering, 2010, 88(5), 272.
45 Zhou B N, Yu Z X, Lu Z H,et al. Nonferrous Metal, 1993(3), 27 (in Chinese).
周邦娜, 余仲兴, 陆芝华, 等. 有色金属, 1993(3), 27.
46 Wang W X. Preparation of Al₂O₃/FeAl tritium permeation barriers on CLAM steels. Master's Thesis, China Academy of Engineering Physics, China,2015 (in Chinese).
王文轩. CLAM钢表面Al₂O₃/FeAl防氚渗透膜层制备. 硕士学位论文, 中国工程物理研究院, 2015.
47 Qin Q X, Liu S L. Plating and Finishing, 2008, 30(8), 25 (in Chinese).
覃奇贤, 刘淑兰. 电镀与精饰, 2008, 30(8), 25.
48 Chen Y M. Electroplating of Al on internal surface of tube in ionic liquids.Master's Thesis, Zhejiang University, China,2015 (in Chinese).
陈益明. 管道内壁离子液体镀铝技术的研究. 硕士学位论文, 浙江大学, 2015.
49 Song Y Q. Research on palladium coating technology on porous stainless steel substrates. Master's Thesis. China Academy of Engineering Physics,China, 2018 (in Chinese).
宋雅琪. 多孔不锈钢基体上钯膜镀覆技术研究. 硕士学位论文, 中国工程物理研究院, 2018.
50 Zhu L Q. Electrodeposition theory and technology of functional coatings, Beijing University of Aeronautics and Astronautics Press, China, 2005, pp.21 (in Chinese).
朱立群. 功能膜层的电沉积理论与技术, 北京航天航空大学出版社, 2005, pp.21.
51 Jiang T, Chollier B M J, Dubé G. Surface & Coatings Technology, 2006, 201(l&2), 1.
52 Chang J K, Chen S Y, Wen T T, et al. Journal of the Electrochemical Society, 2008, 155(3), C112.
53 Zhong M E, He L P, Xiao Y K,et al. Materials Protection, 2006, 39(6), 26 (in Chinese).
钟美娥, 何莉萍, 肖耀坤, 等. 材料保护, 2006, 39(6), 26.
54 Zhang W G, Li W X, Wang B, et al. Plating and Finishing, 2007, 29(4), 33 (in Chinese).
张卫国, 李伟祥, 王飙, 等. 电镀与精饰, 2007, 29(4), 33.
55 Zhu L R. Surface Techniques, 1993, 22(2), 66 (in Chinese).
朱流荣. 表面技术, 1993, 22(2), 66.
56 He F J, Gao H, Huang Y N,et al. Materials Protection, 2006, 39(8), 63 (in Chinese).
何凤姣, 高晖, 黄宇宁, 等. 材料保护, 2006, 39(8), 63.
57 Yuan S P. Electroplating & Finishing, 2009, 28(2), 39 (in Chinese).
袁诗璞. 电镀与涂饰, 2009, 28(2), 39.
58 Qin Q X, Liu S L. Plating and Finishing, 2008, 30(9), 31 (in Chinese).
覃奇贤, 刘淑兰. 电镀与精饰, 2008, 30(9), 31.
59 Zhang S M, Zhou Y Q. Acta Scientiarum Naturalium Universitatis Nankaiensis, 1999, 32(4), 63 (in Chinese).
张守民, 周永洽. 南开大学学报(自然科学), 1999, 32(4), 63.
60 Zhang G, Yang F, Lu G, et al. Journal of Fusion Energy, 2018, 37, 317.
61 Xie R Z, Zou J J, Lin N M,et al. Corrosion & Protection, 2017, 38(8), 619 (in Chinese).
谢瑞珍, 邹娇娟, 林乃明, 等. 腐蚀与防护, 2017, 38(8), 619.
62 Li J D, Wu Y H, Zhang P,et al. Optics and Precision Engineering, 2008, 16(3), 452 (in Chinese).
李加东, 吴一辉, 张平, 等. 光学精密工程, 2008, 16(3), 452.
63 Yang H L, Ding J J, Jiang Y D,et al. Rare Metal Materials Engineering, 2018, 47(5), 1523 (in Chinese).
杨慧玲, 丁晶晶, 江奕东, 等. 稀有金属材料与工程, 2018, 47(5), 1523.
64 Li H J, Ming P M, Zhao Y L,et al. Electromachining & Mould, 2016(5), 47 (in Chinese).
李慧娟, 明平美, 赵云龙, 等. 电加工与模具, 2016(5), 47.
65 Tan Y J, Lim K Y. Surface & Coatings Technology, 2003, 167, 255.
66 Wang S N, Wang Z L. Plating and Finishing, 2008, 30(12), 24 (in Chinese).
王劭南, 王增林. 电镀与精饰, 2008, 30(12), 24.
67 Yuan S P. Electroplating & Finishing, 2009, 28(1), 43 (in Chinese).
袁诗璞. 电镀与涂饰, 2009, 28(1), 43.
68 林光喜. 中国专利, CN01253719.5, 2001.
69 凌国平, 陈益明. 中国专利, CN20151078369.9, 2015.