高强高韧玻璃的研究进展

doi:10.11896/cldb.20090229

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (4356KB)
Export: BibTeX | EndNote (RIS)

Abstract The low service safety induced by the material's intrinsic brittleness is the major obstacle challenging the advanced engineering uses of glasses. In order to meet the requirements of high strength and high toughness for transparent parts of aircrafts, windows of special vehicles, windshields of high-speed trains and windows of pressure vessels, it is necessary to improve the mechanical properties of glasses. The research of high strength and high toughness (HSHT) glasses mainly entails: (i) the development of glass substances with certain chemical compositions and microstructures, such as sodium calcium silicate glasses, alkali-free aluminosilicate glasses, high-alkali and high-alumina glasses, and transparent glass-ceramics; (ii) the adoption and optimization of various strengthening and toughening methods, including acid treatment, tempering, surface ion exchange, ceramization, and the introduction of interlayers or nano-enhancements. The present paper attempts to provide beneficial summary of the worldwide research progress of HSHT glasses from the two above-mentioned perspectives.

Key words： glass mechanical property bending strength fracture toughness transparent part

Published: 10 November 2022 Online: 2022-11-03

CLC number:

TQ171

Fund:National Science and Technology Innovation Zone Project (19-163-00-KX-002-003-01).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Yanhang
	LI Xianzi
	HAN Tao
	XIAO Lei
	HE Kun
	ZU Chengkui

Cite this article:

WANG Yanhang,LI Xianzi,HAN Tao, et al. Research Progress on High Strength and High Toughness Glasses[J]. Materials Reports, 2022, 36(21): 20090229-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20090229 OR http://www.mater-rep.com/EN/Y2022/V36/I21/20090229

1 Sheikh M Z, Atif M, Raza M A, et al. Journal of Non-Crystalline Solids, 2020, 547, 120313.
2 Taynara G S, LagoKamal A R, IsmailFatima A M. Energy and Buildings, 2020, 218, 110050.
3 Alqahtani A, Abdul Sani S F, Amiera Narissa N H, et al. Applied Radiation and Isotopes, 2020, 160, 109132.
4 Kato Y, Yamazaki H, Yoshida S, et al. Journal of Non-Crystalline Solids, 2010, 356, 1768.
5 Benitez T, Gomez S Y, Oliveira A P N, et al. Ceramics International, 2017, 43, 13031.
6 Macedo G N B M, Sawamura S, Wondraczek L. Journal of Non-Crystalline Solids, 2018, 492, 94.
7 He Y Q, Yang J C. Journal of Building Materials, 2003, 6(4), 445(in Chinese).
贺蕴秋, 杨俊超. 建筑材料学报, 2003, 6(4), 445.
8 Gross T M, Tomozawa M, Koike A A. Journal of Non-Crystalline Solids, 2009, 355(9), 563.
9 Soraru G, Maschio R D. Material Science and Engineering, 1987, (85), 25.
10 Krohn M H, Hellmann J R, Shelleman D L, et al. Journal of the American Ceramic Society, 2002, 85(7), 1777.
11 Feng J, Wu X F, Zhou Y H, et al. New Building Materials, 2015(6), 60(in Chinese).
凤杰, 吴小飞, 周钰辉, 等. 新型建筑材料, 2015(6), 60.
12 Yan Y, Li L. New progress on the application study of transparent materials for aviation cockpit, National Defense Industry Press,China, 2011(in Chinese).
颜悦, 厉蕾. 航空座舱透明材料应用研究新进展,国防工业出版社, 2011.
13 Yang Z, Zhao X, Wu X, et al. Procedia Engineering, 2011, 11, 603.
14 Makishima A, Shimohira T. Journal of Non-Crystalline Solids, 1980, 38-39, 661.
15 Gao X L, Zhang Q, Yu J B, et al. Journal of Non-Crystalline Solids, 2018, 481(1), 98.
16 Hou Y S, Yuan J, Kang J F, et al. Journal of Wuhan University of Technology (Materials Science Edition), 2017, 32(1), 58.
17 Zhang L L, Qu Y, Wan X G, et al. Journal of Non-Crystalline Solids, 2020, 532, 119886.
18 Silich L M, Bobkova N M. Journal of Molecular Structure, 1986, 143, 243.
19 Gustavo A, Rosales S, Atsunobu M, et al. Scientific Reports, 2016, 6, 23620.
20 Wang P Z, Wu Y, Ding X Y, et al. Bulletin of the Chinese Ceramic Society, 2016, 35(5), 1622(in Chinese).
王沛钊, 吴亚, 丁小叶, 等. 硅酸盐通报, 2016, 35(5), 1622.
21 Morozumi H, Satoshi Y, Matsuoka J. Journal of the Ceramic Society of Japan, 2020, 128(1), 24.
22 Tian Y L, Li J J, Yang B Y, et al. Journal of Yanshan University, 2017, 41(4), 283(in Chinese).
田英良, 李俊杰, 杨宝瑛, 等. 燕山大学学报, 2017, 41(4), 283.
23 Varshneya A K. Journal of Non-Crystalline Solids, 2010, 356(44-49), 2289.
24 Gy R. Materials Science and Engineering: B, 2008, 149(2), 159.
25 Tick P A, Borrelli N F, Reaney I M. Optical Materials, 2000, 15(1), 81.
26 Riello P, Canton P, Comelato N, et al. Journal of Non-Crystalline Solids, 2001, 288(1), 127.
27 Mukherjee D P,Das S K. Ceramics International, 2013, 39( 1), 571.
28 Liu X F, Zhou J J, Zhou S F, et al. Progress in Materials Science, 2018, 97, 38.
29 Łaczka K, Cholewa-Kowalska K, Sroda M, et al. Journal of Non-Crystalline Solids, 2015, 428, 90.
30 Han L, Song J, Lin C W, et al. Journal of the European Ceramic Society, 2018, 481, 123.
31 Hao X J, Hu X L, Luo Z W, et al. Ceramics International, 2015, 41(10), 14130.
32 Tang W F, Zhang Q, Luo Z W, et al. Applied Physics A-Materials Science & Processing, 2018, 124(2), 191.
33 Tang L Y, Wang J, Cheng J S, et al. Journal of the Chinese Ceramic Society, 2011, 39(1), 147.
34 Guo X Z, Cai X B, Song J, et al. Journal of Non-Crystalline Solids, 2014, 405, 63.
35 Gallo L S, Boas M O, Rodrigues A C, et al. Journal of Materials Research and Technology, 2019, 8(3), 3357.
36 Ke X F, Shan Z T, Li Z H, et al. Journal of the American Ceramic Society, 2020, 103(6), 3600.
37 Theany T, Lars R, Jensen M, et al. Journal of Non-Crystalline Solids, 2020, 534, 119946.
38 Kapoor S, Januchta K, Youngman R, et al. Physical Review Materials, 2018, 2(6), 063603.
39 Xiong X, Li T M, Ma Q Q, et al. Chinese Journal of Theoretical and Applied Mechanics, 2018, 50(3),622(in Chinese).
熊迅, 李天密, 马棋棋, 等. 力学学报, 2018, 50(3), 622.
40 Kolli M, Hamidouche M, Bouaouadja N, et al. Journal of the European Ceramic Society, 2009, 29, 2697.
41 Fu J, Zhang B J, Ma J R. Journal of Aeronautical Materials, 2003, 23(S), 179(in Chinese).
付静, 张保军, 马眷荣. 航空材料学报, 2003, 23(S), 179.
42 Yu P P. Study on transient jet impingement heat transfer during the fast cooling process of glass physical tempering. Master's Thesis, Changzhou University, China, 2018 (in Chinese).
于平平. 玻璃物理钢化急冷工况下瞬态射流冲击换热研究. 硕士学位论文, 常州大学, 2018.
43 Daudeville L,Carre H. Journal of Thermal Stresses, 1998, 21, 667.
44 Zhang Z Y, Tian Y M, Chen F W, et al. Journal of Yanshan University, 2018, 42(1), 44(in Chinese).
张喆颖,田月梅,陈发伟, 等. 燕山大学学报, 2018, 42(1), 44.
45 Ragoen C, Sen S, Lambricht T, et al. Journal of Non-Crystalline Solids, 2017, 458, 129.
46 Liu X G, Bao Y W, Wan D T, et al. Journal of Inorganic Materials, 2020, 35(2), 211(in Chinese).
刘小根, 包亦望, 万德田, 等. 无机材料学报, 2020, 35(2), 211.
47 Sridharan S, Tomozawa M. Journal of Non-Crystalline Solids, 1995, 182, 262.
48 Zhao Y H, Li G X, Ma X P. Journal of the Chinese Ceramic Society, 2003, 31(4), 413(in Chinese).
赵永红, 李光新, 马新沛. 硅酸盐学报, 2003, 31(4), 413.
49 Mitchell A L, Smith C M. Journal of the American Ceramic Society, 2020, 103(9), 1.
50 Beall G H, Pinckney L R. Journal of the American Ceramic Society, 1999, 82(1), 5.
51 David W, Alex H, Neil S, et al.In:37th IEEE. USA, 2011,pp.1949.
52 Keefer K D, Michalske T A. American Ceramic Society Bulletin, 1983, 62(3), 419.
53 Uno T, Kasuga T, Nakayama S, et al. Journal of the American Ceramic Society, 1993, 76(2), 539.
54 Kishor P, Gadkaree K C. American Ceramic Society Bulletin, 1986, 65(2), 370.
55 Luo X T, Zhang L T. Acta Materiae Compositae Sinica, 1997, 14(3), 1 (in Chinese).
罗学涛, 张立同. 复合材料学报, 1997, 14(3), 1.
56 Cheng Y, Xiao H N. China Ceramics, 2005, 41(4), 41 (in Chinese).
成茵, 肖汉宁. 中国陶瓷, 2005, 41(4), 41.
57 Stavrou E, Zaug J M, Bastea S, et al. Journal of Applied Physics, 2017, 121, 175901.
58 Shen Z C, Zhao Y Y, Tian Z Q, et al. Journal of Non-Crystalline Solids, 2018, 499, 17.
59 Li B, Li W, Zheng J G. Journal of Electronic Materials, 2018, 47, 766.
60 Dal Maschio R, Scardi P. Ceramics International, 1991, 17, 31.
61 Eftekhari Y B, Alizadeh P, Rezazadeh L. Journal of the European Cera-mic Society, 2007, 27, 2311.
62 Mirhadi B, Mehdikhani B. Journal of Non-Crystalline Solids, 2011, 357, 3711.
63 Fan S W, Ma X, Ji B, et al. Ceramics International, 2019, 45(1), 550.
64 Yi H C, Guigne J Y, Moore J J, et al. Journal of Materials Synthesis and Processing, 2002, 10, 163.
65 Anusavice K J, Shen C, Vermost B, et al. Dental Materials, 1992, 8, 149.
66 Arun K V, Ian M S. Journal of the American Ceramic Society, 2010, 18(2), 27.
67 Mouritz N S, Lynn M T, Randall E Y, et al. Frontiers in Materials, 2016, 3, 1.
68 Calizo I, Bao W, Miao F, et al. Applied Physics Letters, 2007, 91, 201904.
69 Lee D Y, Kim D J, Song Y S. Journal of Materials Science Letters, 2002, 21, 1223.
70 Wei G, Li F, Tiesong L, et al. Ceramics International, 2019, 45, 5036.
71 Sibeko M A, Luyt A S, Saladino M L. Polymer Bulletin, 2017, 74, 2841.
72 Antoine G, Batra R C. Composite Structures, 2014, 116(1), 193.
73 Zou H, Wu S S, Shen J. Chemical Reviews, 2008, 108(9), 3893.