液体弹珠的微流体操作及工程应用

doi:10.11896/cldb.20060146

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (12839KB)
Export: BibTeX | EndNote (RIS)

Abstract Liquid marbles are a soft matter formed by wrapping hydrophobic microscale particles on the surface of a droplet, and the volume is usually between a few microliters and hundreds of microliters, and is constructed by a structure separating the internal liquid and the carrier through a particle layer in achieving the non-wetting and stable existence of trace liquid on solid or liquid surface effect, which is similar to Leidenfrost droplets but differs from the preparation of super-hydrophobic surfaces by construction of special surface microstructures or chemical modification.
Current research has proven that liquid marbles have unique superior physical properties, such as non-viscosity, high elasticity, low friction, slow evaporation, and the ability to interact with external environment. These superior properties enable liquid marbles as the ideal digital microfluidic platform. It has potential applications in microreactors, sensors, pharmaceuticals and other related fields. The preparatory method of liquid marble is relatively simple and does not require complicated instruments or equipment, yet it brings high economic benefits.
This paper reviewed and discussed the methods of preparation, structural characteristics and properties of different materials of the liquid marbles, inclusive of the effective surface tension, mechanical stability and evaporation rate. Several mainstream techniques to control the movement and release of liquid marbles had been reviewed and assessed their advantages and disadvantages. The current main applications of liquid marbles in engineering had been reviewed and summarized with their prospects, potential applications and future development trends.

Key words： microfluidics liquid marbles superhydrophobic effective surface tension

Published: 10 December 2021 Online: 2021-12-23

CLC number:	O647.11
	O647.5

Fund:National Natural Science Foundation of China (51805367), the Science Foundation of Tianjin (18JCQNJC04800, 17JCYBJC19000, 18JCZDJC31800)

Corresponding Authors: zhengyelongby@tju.edu.cn

About author: Jie Pan received her B.S. degree in Tianjin University in 2017. She is currently pursuing her M.S. degree at School of Precision Instruments and Opto-Electronics Engineering, Tianjin University under the supervision of Prof. Meirong Zhao and Lec. Yelong Zheng. Her research has focused on mechanical characteristics of li-quid marbles.
Yelong Zheng received the M.S. and Ph.D. degrees from Tianjin University, China, in 2012 and 2015, respectively, where he is currently an assistant professor with the State Key Laboratory of Precision Measuring Technology and Instruments. His current research interests include microforce measurement and vivo sensitive measuring forces and tribology. He participated in the national science and technology support plan project, “Experimental Technology and Device Research in Micro-nano Force Value Testing and Traceability”.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	PAN Jie
	ZHAO Meirong
	SUN Yukai
	LU Dunqiang
	CLARENCE Augustine T. H Tee
	SONG Le
	ZHENG Yelong

Cite this article:

PAN Jie,ZHAO Meirong,SUN Yukai, et al. Microfluidics Operational Techniques and Engineering Applications of Liquid Marbles[J]. Materials Reports, 2021, 35(23): 23001-23019.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20060146 OR http://www.mater-rep.com/EN/Y2021/V35/I23/23001

1 Yan C, Li M, Lu Q H. Progress in Chemistry, 2011, 23(4),41 (in Chinese).
闫超, 李梅, 路庆华. 化学进展, 2011, 23(4),41.
2 Aussillous P, David Quéré.Nature, 2001, 411(6840),924.
3 Tian J, Arbatan R, Li R, et al. Chemical Communications, 2010, 46(26), 4734.
4 Zhao Y, Xu Z, Parhizkar M, et al.Microfluidics and Nanofluidics, 2012, 13(4),555.
5 Liu Z, Fu X, Binks B P, et al. Langmuir, 2015, 31(41), 11236.
6 Ireland P M, Thomas C A, Lobel B T, et al.Frontiers in Chemistry, 2018, 6,280.
7 Ireland P M, Noda M, Jarrett E D, et al. Powder Technology, 2016, 303,55.
8 Liyanaarachchi K R, Ireland P M, Webber G B, et al. Applied Physics Letters, 2013, 103(5),1933.
9 Bhosale P S, Panchagnula M V. Langmuir, 2012, 28(42), 14860.
10 Sreejith K R, Ooi C H, Jin J, et al. Review of Scientific Instrument, 2019, 90, 055102.
11 Li X, Wang Y, Huang J, et al. Applied Physics Letters, 2017, 111,261604.
12 Li X, Shi H, Wang Y, et al.Soft Matter, 2020, 16,4512.
13 Nguyen T H, Hapgood K, Shen W. Chemical Engineering Journal, 2010, 162(1), 396.
14 Bormashenko E, Pogreb R, Whyman G, et al. Langmuir, 2009, 25(4),1893.
15 Huang J, Wang Z, Shi H, et al. Soft Matter, 2020, 16, 4632.
16 Matsukuma D, Watanabe H, Fujimoto A, et al. Bulletin of the Chemical Society of Japan, 2015, 88(1),84.
17 Xue Y, Wang H, Zhao Y, et al. Advanced Materials, 2010, 22(43),4814.
18 Bormashenko E, Pogreb R, Balte R, et al.Petroleum Science,2015,12, 340.
19 Tyowua A T, Mooney J M, Binks B P. Colloids and Surfaces A, Physicochemical and Engineering Aspects, 2018, 506(5),288.
20 Sivan V, Tang S Y, O'Mullane A P, et al. Advanced Functional Materials, 2013, 23(2), 144.
21 Sivan V, Tang S Y, O'Mullane A P, et al. Applied Physics Letters, 2014, 105(12),121607.
22 Tang S Y, Sivan V, Khoshmanesh K, et al. Nanoscale, 2013, 5, 5949.
23 Tang X, Tang S Y, Sivan V, et al. Applied Physics Letters, 2013, 103(17),174104.
24 Jeon J, Lee J B, Chung S K, et al. In: Transducers International Solid-state Sensors, Actuators & Microsystems Conference. IEEE, 2015, pp. 069.
25 Zavabeti A, Daeneke T, Chrimes A, et al. Nature Communications, 2016, 7, 12402.
26 Zang D, Chen Z, Zhang Y, et al. Soft Matter, 2013, 9(20),5067.
27 Aussillous P, Quéré D. Proceedings of the Royal Society A, Mathematical, Physical and Engineering Sciences, 2006, 462(2067),973.
28 Ooi C H, Plackowski C, Nguyen A V, et al. Scientific Reports, 2016, 6(1),21777.
29 Bormashenko E, Bormashenko Y, Oleg G. Langmuir, 2010, 26(15),12479.
30 Bormashenko E, Musin A, Whyman G, et al. Colloids & Surfaces A, Physicochemical and Engineering Aspects, 2013, 425,15.
31 Bormashenko E, Pogreb R, Whyman G, et al. Colloids & Surfaces A, Physicochemical and Engineering Aspects, 2009, 351(1-3),78.
32 Arbatan T, Shen W. Langmuir, 2011, 27(21),12923.
33 Celestini F, Kofman R. Physical Review E, 2006, 73(4), 041602.
34 Li X, Wang R, Shi H, et al. Applied Physics Letters, 2018, 113(10),101602.
35 Li X, Wang R, Huang S, et al.Soft Matter, 2018, 14, 9877.
36 Wang R, Li X. Powder Technology, 2020, 368,608.
37 Asare-Asher S, Connor J N, Sedev R.Journal of Colloid and Interface Science, 2015, 449,341.
38 Rendos A, Alsharif N, Kim B L, et al. Soft Matter, 2017,13, 8903.
39 Planchette C, Biance A L, Lorenceau E. EPL, 2012, 97(1), 14003.
40 Liu Z, Zhang Y, Yang T, et al. Applied Physics Letters, 2019, 114(24),243701.1.
41 Azizian S, Fujii S, Kasahara M, et al.Advanced Powder Technology, 2019, 30(2),330.
42 Hu Y, Jiang H, Liu J, et al.Rsc Advances, 2013, 4, 3162.
43 Dandan M, Erbil H Y.Langmuir, 2009, 25(14),836.
44 Tosun A, Erbil H Y. Applied Surface Science, 2009, 256(5),1278.
45 Laborie B, Lachaussée F, Lorenceau E, et al. Soft Matter, 2013,9,4822.
46 Ueno K, Hamasaki S, Wanless E J, et al.Langmuir, 2014, 30(11),3051.
47 Erbil H Y. Advances in Colloid & Interface Science, 2012, 170(1-2),67.
48 Vadivelu R K, Kamble H, Munaz A, et al. Scientific Reports, 2017, 7(1),12388.
49 Cengiz U, Erbil H Y.Soft Matter, 2013, 9(37),8980.
50 L Zhang, D Cha, P Wang. Advanced Materials, 2012, 24(35), 4756.
51 Ooi C H, Nguyen A V, Evans G M, et al. Scientific Reports,2016, 6, 38346.
52 Nguyen N.Langmuir, 2013, 29(45),13982.
53 Khaw M K, Ooi C H, Mohd-Yasin F, et al. Nguyen N.Lab on a Chip, 2016, 16, 2211.
54 Zhao Y, Xu Z, Parhizkar M, et al.Microfluidics and Nanofluidics, 2012, 13(4),555.
55 Jeong J, Seo J, Chung S K, et al. Materials Research Express, 2020, 7,015708.
56 Jeong J, Seo J, Chung S K, et al. In: International Conference on Micro Electro Mechanical Systems (MEMS). IEEE,2019, pp. 409.
57 Jin J, Ooi C H, Dao D V, et al. Soft Matter, 2018, 14.
58 Liu Z, Fu X, Binks B, Nguyen N. Soft Matter, 2016, 13(1),119.
59 Liu Z, Yang T, Huang Y, et al. Advanced Functional Materials, 2019, 29(19), 1901101.
60 Zhang Y, Fu X, Guo W, et al.Lab on a Chip, 2019, 19, 3526.
61 Bormashenko E, Bormashenko Y, Pogreb R, et al. Langmuir, 2011, 27(1),7.
62 Bormashenko E, Pogreb R, Balter R, et al. Applied Physics Letters, 2012, 100(15),1.
63 Ghanbari M, Rezazadeh G. Sensing and Imaging, 2019, 20(1), 20.
64 Ghanbari M, Rezazadeh G.Microsystem Technologies, 2020, 26, 617.
65 Fu X, Zhang Y, Binks B P, et al. ACS Applied Materials & Interfaces, 2018, 10(41), 34822.
66 Jin J, Ooi C H, Sreejith K R, et al. Microfluidics and Nanofluidics, 2019, 23(7),85.
67 Bormashenko E, Bormashenko Y, Grynyov R, et al. Journal of Physical Chemistry C, 2015, 119(18),9910.
68 Ooi C H, Nguyen A, Geoffrey M. E, et al. RSC Advances, 2015, 5(122),101006.
69 Tan T T Y, Ahsan A, Reithofer M R, et al. Langmuir, 2014, 30(12),3448.
70 Paven M, Mayama H, Sekido T, et al. Advanced Functional Materials, 2016, 26(19), 3199.
71 Asaumi Y, Rey M, Vogel N,et al. Langmuir, 2020, 36(10), 2695.
72 Chu Y, Liu F, Qin L, et al.ACS Applied Materials & Interfaces, 2016, 8(2),1273.
73 Kavokine N, Anyfantakis M, Morel M, et al. Angewandte Chemie, 2016, 128(37),11349.
74 Inoue M, Fujii S, Nakamura Y, et al. Polymer Journal, 2011, 43(9),778.
75 Yusa S I, Morihara M, Nakai K, et al.Polymer Journal, 2014, 46(3),145.
76 Zang D, Li J, Chen Z, et al. Langmuir, 2015, 31(42), 11502.
77 Tyowua, A T, Ahor F, Yiase S G, et al. SN Applied Sciences, 2020, 2,345.
78 Li M, Tian J, Li L, et al.Chemical Engineering Science, 2013, 97,337.
79 Sheng Y, Sun G, Wu J, et al.Angewandte Chemie, 2015, 127(24),7118.
80 Luo X, Yin H, Li X,et al. Chemical Communications, 2018, 54,9119.
81 Miao Y E, Lee H K, Chew W S, et al. Chemical Communications, 2014, 50(44),5923.
82 Arbatan T, Li L, Tian J, et al. Advanced Healthcare Materials, 2012, 1(1),80.
83 Tian J, Fu N, Chen X D, et al.Colloids and Surfaces B, Biointerfaces, 2013, 106(1),187.
84 Serrano M C, Nardecchia S, Gutiérrez M C, et al. Applied Materials & Interface, 2015, 7(6), 3854.
85 Arbatan T, Al-Abboodi A, Sarvi F, et al. Advanced Healthcare Materials, 2012, 1(4),467.
86 Sreejith K R, Gorgannezhad L, Jin J, et al. Micromachines, 2020, 11(3), 242.
87 Bormashenko E, Musin A. Applied Surface Science, 2009, 255(12),6429.
88 Adamatzky A, Tsompanas M A, Draper T C, et al.ChemPhysChem, 2019, 21(1),90.
89 Zeng H, Zhao Y. Applied Physics Letters, 2010, 96(11),1.
90 Bormashenko E, Pogreb R, Musin A. Journal of Colloid & Interface Science, 2012, 366(1),196.
91 Janská P, Rychecky O, Zadražil A, et al.Journal of Pharmaceutical Sciences, 2019, 108(6), 2136.
92 Savkare A D, Bhavsar M R, Gholap V D, et al. International Journal of Pharmaceutics, 2017,8(7),2768.
93 Shin D, Huang T, Neibloom D, et al. ACS Applied Materials & Interfaces, 2019, 11(37),34478.
94 Shailendar S, Sundaram M M.Materials and Manufacturing Processes, 2016,31(1),81.
95 Gu H, Ye B, Ding H, et al. Journal of Materials Chemistry, 2015, 3(26),6607.