金属材料微波烧结技术的研究进展

doi:10.11896/cldb.20060130

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (17178KB)
Export: BibTeX | EndNote (RIS)

Abstract The rapid sintering of metals and their alloys and composite materials has always been a problem in the field of metal materials. Microwave sintering technology has the characteristics of volume heating, selective heating and non-thermal effect. Compared with the traditional sintering process, it has great potential in the field of metal materials with fine and uniform grain structure and excellent comprehensive mechanical properties. This article describes the influence of the thermal effects (dielectric, conductance and magnetic loss) and the non-thermal effects (discharge and magnetic effect) on sintered samples during the microwave sintering process. The major progress on the microwave sintering of metals, alloys and their composite materials were reviewed. The problems faced in the current research are analyzed, and the research direction of microwave sintering technology in the future is prospected, which provides a powerful reference for follow-up researchers.

Key words： microwave sintering metal material mechanical property thermal effect non-thermal effect thermal runaway

Published: 10 December 2021 Online: 2021-12-23

CLC number:

TF124

Fund:National Natural Science Foundation of China (51774226, U1460104)

Corresponding Authors: yj-yangjun@xauat.edu.cn;pengh@bjut.edu.cn

About author: Ruihu Wang is a graduate student in the School of Metallurgy Engineering at Xi'an University of Architecture and Technology. His current research is the microwave sintering process of refractory metals.
Jun Yang, a professor of Xi'an University of Architecture and Technology, Ph.D.'s supervisor. He graduated from Xi'an Jiaotong University with a doctorate in materials science in 2007. He mainly engaged in teaching and scientific research in the field of continuous casting new technology and advanced materials. He has published more than 100 papers in scientific journals and obtained authorized 2 patents.
Peng Hu, a professor of Beijing University of Technology, Ph.D.'s supervisor. He received his B.S. degree from Beijing University of Chemical Technology in 2000, and obtained Ph.D. degree from Institute of Process Engineering (IPE), Chinese Academy of Sciences (CAS) in 2008. From 2012 to 2013, He worked as a research fellow at Nanyang Technological University. He joined Beijing University of Technology at 2017 after work 17 years in IPE. His research interests focus on plasma enhanced chemical process, aiming to develop new strategy for large-scale synthesis, structure control and functionalization of nanomaterials for advanced applications. He has published more than 50 papers in scientific journals.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Ruihu
	YANG Jun
	ZOU Dening
	HU Peng
	XIANG Weicheng

Cite this article:

WANG Ruihu,YANG Jun,ZOU Dening, et al. Recent Progress on Microwave Sintering of Metal Materials[J]. Materials Reports, 2021, 35(23): 23153-23161.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20060130 OR http://www.mater-rep.com/EN/Y2021/V35/I23/23153

1 Sun J, Wang W, Yue Q Y, et al. Applied Energy, 2016, 175, 141.
2 Mishra P, Upadhyaya A, Sethi G. Metallurgical and Materials Transactions B, 2006, 37(5), 839.
3 Haque K E. International Journal of Mineral Processing, 1999, 57(1), 1.
4 Jones D A, Lelyveld T P, Mavrofidis S D, et al. Resources, Conservation & Recycling, 2002, 34(2), 75.
5 Kasin, Ivar K. E. U. patent, EP1850977, 2015.
6 Jin Y, Xie H K. Tool Engineering, 2005, 39(1), 19 (in Chinese).
晋勇, 谢华锟. 工具技术, 2005, 39(1), 19.
7 Ma J L, Tong X F, Peng H. New Material Industry, 2001, 11(6), 30 (in Chinese).
马金龙, 童学锋, 彭虎. 新材料产业, 2001, 11(6), 30.
8 Osepchuk J M. IEEE Transactions on Microwave Theory and Techniques, 2003, 32(9), 1200.
9 Wilhelm K E E. US patent, 2094602, 1937.
10 Tinga W R, Voss W A G. Microwave powder engineering, Academic Press, USA, 1968, pp. 141.
11 Roy R, Agrawal D, Cheng J, et al. Nature, 1999, 399(6750), 304.
12 Zhuang T Y, Zhang J L, Wang F, et al. Powder Metallurgy Technology, 2019, 37(5), 392(in Chinese).
庄天涯, 张际亮, 王霏, 等.粉末冶金技术, 2019, 37(5), 392.
13 Tinga W R, Eke K. The Journal of Microwave Power and Electromagnetic Energy: a Publication of the International Microwave Power Institute, 2012, 46(4), 192.
14 Khaled D E, Novas N, Gazquez J A, et al. Renewable and Sustainable Energy Reviews, 2018, 82, 1.
15 Mishra P, Upadhyaya A, Sethi G. Metallurgical and Materials Transactions B, 2006, 37(5), 839.
16 Fan J L, Huang B Y, Liu J, et al. Powder Metallurgy Industry, 2004, 14(1), 29 (in Chinese).
范景莲, 黄伯云, 刘军, 等. 粉末冶金工业, 2004, 14(1), 29.
17 Mondal A, Upadhyaya A, Agrawal D. International Journal of Refractory Metals and Hard Materials, 2010, 28(5), 597.
18 Xu L. Research on properties of microwave heating metal copper powder and infiltration sintering tungsten copper composite. Ph.D. Thesis, Kunming University of Science and Technology, China, 2016 (in Chinese).
许磊. 微波加热金属铜粉及熔渗烧结钨铜复合材料特性研究. 博士学位论文, 昆明理工大学, 2016.
19 Wang W, Liu Z, Sun J, et al. AIChE Journal, 2012, 58(12), 386.
20 Feng Y K, Wang W L, Wang Y C, et al. Science of the Total Environment, 2018, 645, 788.
21 Zhou Y L, Wang W L, Sun J, et al. Applied Thermal Engineering, 2017, 125, 393.
22 Xiao Y, Xu F, Dong B, et al. Metals, 2017, 7(2), 47.
23 Peng Y D. Studies on microwave heating mechanism and sintering beha-vior of powder metallurgy materials. Ph.D. Thesis, Central South University, China, 2011 (in Chinese).
彭元东. 微波加热机制及粉末冶金材料烧结特性研究. 博士学位论文, 中南大学, 2011.
24 Liu W, Tian M C, Li J H. 中国专利, CN107144130B, 2019.
25 Ren C, Fang Z, Zhang H, et al. International Journal of Refractory Metals and Hard Materials, 2016, 61, 273.
26 Kim Y, Lee S, Noh J, et al. International Journal of Refractory Metals and Hard Materials, 2013, 41, 442.
27 Hu P, Chen T Y, Li X J,et al. International Journal of Refractory Metals and Hard Materials, 2019, 83, 104969.
28 Liu W S, Xu Z G, Ma Y Z. Materials Reports A: Review papers, 2010, 24(5), 33 (in Chinese).
刘文胜, 徐志刚, 马运柱. 材料导报:综述篇, 2010, 24(5), 33.
29 Mondal A, Upadhyaya A, Agrawal D. International Journal of Refractory Metals and Hard Materials, 2010, 28(5), 597.
30 Wang K, Wang X P, Liu R, et al. Journal of Nuclear Materials, 2012, 431(1-3), 206.
31 Chhillar P, Agrawal D, Adair J.H. Powder Metallurgy, 2013, 51(2), 181.
32 Duan B H, Zhang Z, Wang D Z, et al. Transactions of Nonferrous Metals Society of China, 2019, 29(8), 1705.
33 Li X Q. Processing technology, Beijing University of Aeronautics and Astronautics Press, China, 2003, pp. 273.
34 Wang M C, Zhao Z W, Yang D Q, et al. Materials Reports, 2015, 29(S1), 26(in Chinese).
王明超, 赵志伟, 杨德青, 等. 材料导报, 2015, 29(S1), 26.
35 Bao R. Studies on microwave sintering of WC-Co hard matels. Ph.D. Thesis, Central South University, China, 2013(in Chinese).
鲍瑞. WC-Co硬质合金的微波烧结制备研究. 博士学位论文, 中南大学, 2013.
36 Li M, Gong M F, Zhang C Y, et al. Materials Reports A: Review papers, 2020, 34(15), 15138 (in Chinese).
李萌, 弓满锋, 张程煜, 等. 材料导报:综述篇, 2020, 34(15), 15138.
37 Rumman R, Chuan L, Jamie S, et al. Metals and Materials Internatio-nal, 2019, 26(6), 1.
38 Rumman R, Chuan L, Jamie S, et al. International Journal of Refractory Metals and Hard Materials, 2019, 81, 7.
39 Bao R, Yi J, Zhang H, et al. International Journal of Refractory Metals and Hard Materials, 2012, 32, 16.
40 Bao R, Guo S D, Yi J H, et al. The Chinese Journal of Nonferrous Me-tals, 2020,30(8), 1828 (in Chinese).
鲍瑞, 郭圣达, 易健宏, 等.中国有色金属学报, 2020, 30(8), 1828.
41 Tian Z H, Wu X B, Gao P P, et al. Cemented Carbide, 2019, 36(4), 313 (in Chinese).
田智豪, 伍小波, 高平平, 等. 硬质合金, 2019, 36(4), 313.
42 Gao L Y. Study on the technology and performance of microwave sintering Ti(C,N)-based cermet. Master's Thesis, Hunan University of Technology, China, 2014 (in Chinese).
高凌燕. 微波烧结Ti(C,N)基金属陶瓷的工艺及性能研究. 硕士学位论文, 湖南工业大学, 2014.
43 Ye J D, Yin Z B, Yuan J T, et al. International Journal of Applied Ceramic Technology, 2020, 17(2), 761.
44 Hu H P, Cheng Y, Yin Z B, et al. Ceramics International, 2015, 41(10), 1.
45 Monteverde F, Medri V, Bellosi A. Journal of the European Ceramic Society, 2002, 22(14-15). 2587.
46 Deng Y, Jiang X Q, Zhang Y H, et al. Materials Science & Engineering A, 2016, 675, 164.
47 Zhan B, Liu N, Jin Z B, et al. Transactions of Nonferrous Metals Society of China, 2012, 22(5), 1096.
48 Xu Q Z, Ai X, Zhao J, et al. Materials Science & Engineering A, 2015, 628, 281.
49 Bellosi, Alida, Medri, et al. Journal of the American Ceramic Society, 2001, 84(11), 2669.
50 Yin Z B, Yan S Y, Xu W W, et al. Ceramics International, 2018, 44(1), 1034.
51 Lv D M, Zhou W P. China Tungsten Industry, 2009, 24(5), 107 (in Chinese).
吕大铭, 周武平. 中国钨业, 2009, 24(5), 107.
52 Zhang J J, Liu W S, Ma Y Z, et al. Transactions of Nonferrous Metals Society of China, 2012, 22(11), 3088 (in Chinese).
张佳佳, 刘文胜, 马运柱, 等. 中国有色金属学报, 2012, 22(11), 3088.
53 Upadhyaya A, Tiwari S K, Mishra P. Scripta Materialia, 2007, 56(1), 5.
54 Ma Y Z, Zhang J J, Liu W S, et al. Rare Metal Materials and Enginee-ring, 2012, 41(9), 1680 (in Chinese).
马运柱, 张佳佳, 刘文胜, 等. 稀有金属材料与工程, 2012, 41(9), 1680.
55 Zhou C S, Yi J H, Zhang H Z. Transactions of Nonferrous Metals Society of China, 2012, 22(10), 2818 (in Chinese).
周承商, 易健宏, 张浩泽. 中国有色金属学报, 2012, 22(10), 2818.
56 Nie P, Kang X F, Wang M H. Journal of Shenyang Institute of Aeronautical Engineering, 2011, 28(3), 60 (in Chinese).
聂鹏, 康晓峰, 王明海. 沈阳航空航天大学学报, 2011, 28(3), 60.
57 Qin H Q, Lu A J, Lin F, et al. Superhard Material Engineering, 2016, 28(6), 6 (in Chinese).
秦海青, 卢安军, 林峰, 等. 超硬材料工程, 2016, 28(6), 6.
58 Shao W Z, Ivanov V, Zhen L, et al. Materials Letters, 2004, 58(1), 146.
59 Ye X L, Guo S H, Gao J Y, et al. Diamond and Abrasives Engineering, 2018, 38(1), 41 (in Chinese).
叶小磊, 郭胜惠, 高冀芸, 等. 金刚石与磨料磨具工程, 2018, 38(1), 41.
60 Hou M, Guo S H, Yang L, et al. Powder Technology, 2019, 356, 403.
61 Xiang B, Xie Z G, He Y H, et al. Diamond and Abrasives Engineering, 2007(2), 158 (in Chinese).
向波, 谢志刚, 贺跃辉,等. 金刚石与磨料磨具工程, 2007(2), 158.
62 Guo S H, Hu L T, Yang L, et al. Inorganic Chemicals Industry, 2020, 52 (12), 23(in Chinese).
郭胜惠,胡龙涛,杨黎,等. 无机盐工业, 2020, 52 (12), 23.
63 Liu W C. Research on microwave thermal runaway mechanisms based on SR-CT experiments. Ph.D. Thesis, University of Science and Technology of China, China, 2018 (in Chinese).
刘文超. 金属微波热失控行为的同步辐射实验和热动力学原理研究. 博士学位论文, 中国科学技术大学, 2018.
64 Xiao Y, Xu F. In: Conference Record of the 2018 National Conference on Solid Mechanics. Harbin, 2018, pp. 202.
65 John S. Francis, Rishi R. Journal of the American Ceramic Society, 2012, 95(1), 138.
66 Ma J, Diehl J F, Johnson E J, et al. Journal of Applied Physics, 2007, 101(7), 153.
67 Charles M, Geuntak L, Tony Z, et al. Acta Materialia, 2018, 147, 24.
68 Mondal S, Durygin A, Drozd V, et al. Journal of the American Ceramic Society, 2020, 103(9), 4876.