陶瓷/纤维复合材料层间混杂结构对装甲板抗侵彻性能的影响

doi:10.11896/cldb.20030208

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (3581KB)
Export: BibTeX | EndNote (RIS)

Abstract Armor systems made of ceramic and fiber composites are widely used to against armor-piercing bullets. As an important part of armor weapon system, the anti-impact capability of bulletproof plate is related to the security capability of armor weapon. The purpose of this paper is to investigate the interlayer hybrid effect of the fiber layer in the armor system and the influence of the position and thickness of the ceramic layer on the target's impact resistance. In the experiment, the penetrating behavior of the target plate was simulated by ABAQUS/Explicit using the 54 type 12.7 mm diameter penetrator as the impact body, combining silicon carbide ceramics, carbon fiber epoxy composite and UHMWPE fiber epoxy composites to form armor plates. The results show that the fiber interlayer hybrid mode has a great influence on the bulletproof effect of laminate. The penetration resistance of composite laminates with the optimal interlayer hybrid structure is better than single fiber composite laminates. The armor layer structure with ceramic layer laid in the middle of two fiber layers can achieve relatively ideal energy absorption effect. The armor plate with a total thickness of 10 mm uses the 8 mm ceramic can have the best ballistic resistance, but considering the manufacturing process and cost, 2 mm ceramic plate is the best choice.

Key words： impact simulation ceramic fiber composite material penetration resistance

Published: 12 September 2020

CLC number:

TJ03

Fund:This work was financially supported by the National Key R&D Program of China (2016YFC0301402).

About author:: Rongman Qin,graduated from Shandong University with a master degree in software engineering in 2015. She is currently studying in the School of Materials Science and Engineering, Shandong University, and is studying under Professor Zhu Bo. Her main research interest is carbon fiber ballistic performance.Bo Zhu, graduated from the University of Science and Technology of Beijing with a Ph.D. supervisor, is currently a professor at Shandong University, the deputy director of the Carbon Fiber Engineering Technology Research Center of Shandong University, the director of the Institute of Polymer Materials, School of Materials, Shandong University. Serves as the director of Shanda Yingli Advanced Fiber Engineering Technology Center, a director of the Shandong Aerospace Society, an executive director of the Shandong Compo-site Materials Society, as a high-level innovation and entrepreneurship in Jiangsu Talents and Jilin City Leading Expert.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	QIN Rongman
	ZHU Bo
	QIAO Kun
	YUAN Xiaomin

Cite this article:

QIN Rongman,ZHU Bo,QIAO Kun, et al. Effect of Hybrid Structure of Ceramic/Fiber Composite Material on Penetration Resistance of Armor Plate[J]. Materials Reports, 2020, 34(18): 18183-18187.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.20030208 OR http://www.mater-rep.com/EN/Y2020/V34/I18/18183

1 Sarva S, Nemat-Nasser S, Mcgee J, et al. International Journal of Impact Engineering, 2007, 34(2), 277.
2 Naik N, Kumar S, Ratnaveer D, et al. International Journal of Damage Mechanics, 2013, 22(2), 145.
3 Roeder B A, Sun C T. International Journal of Impact Engineering, 2001, 25(2), 169.
4 Signetti S, Pugno N M. Journal of the European Ceramic Society, 2014, 34(11), 2823.
5 Medvedovski E. Ceramics International, 2010, 36, 2103.
6 Medvedovski E. Ceramics International, 2010, 36, 2117.
7 Zhou Z, Wu G, Jiang L, et al. Materials & Design, 2014, 63, 658.
8 Karamis M B, Tasdemirci A, Nair F. Composites Part A (Applied Science and Manufacturing), 2003, 34, 217.
9 Sun Y, Shi B H, Li T T, et al. Journal of Solid Rocket Technology, 2016(39),709(in Chinese).
孙颖, 史宝会,李涛涛,等. 固体火箭技术, 2016(39), 709.
10 Pandya K S, Pothnis J R, Ravikumar G, et al. Materials & Design, 2013, 44, 128.
11 Yahaya R, Sapuan S M, Jawaid M, et al. Measurement, 2016,77, 335.
12 Munoz R, Martinez-Hergueta F, Galvez F, et al. Composite Structures, 2015, 127, 141.
13 Peijs A A J M, Catsman P, Govaert L E, et al. Composites, 1990, 21(6), 513.
14 Yang K, Zhu B, Cao W W, et al. Materials Reports A: Review Papers,2015,29(7), 24(in Chinese).
杨坤, 朱波, 曹伟伟, 等. 材料导报:综述篇, 2015,29(7), 24.
15 Shi Y, Swait T, Soutis C. Composite Structures, 2012, 94, 2902.
16 Johnson G R, Holmquist T J. American Institute of Physics, DOI: 10.1063/1.46199.
17 Sharma A, Mishra R, Jain S, et al. Thin-Walled Structures, 2018,126, 193.
18 Liu W, Chen Z, Chen Z, et al. Materials and Design, 2015, 87, 421.
19 Zhou X, Li K, Chen C H, et al. Journal of Vibration and Shock, 2018, 37(22), 6(in Chinese).
周霞, 李凯, 陈成杭, 等. 振动与冲击, 2018, 37(22), 6.
20 Zhao W. Property research and design of interply hybrid composite numerical simulation research of resistance performance. Master's Thesis, Harbin Institute of Technology, China, 2012(in Chinese).
赵伟. 层间混杂复合材料体系设计与抗冲击性能数值模拟研究. 硕士学位论文, 哈尔滨工业大学, 2012.