3D打印聚合物纳米复合材料的研究进展

doi:10.11896/cldb.19120105

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (9121KB)
Export: BibTeX | EndNote (RIS)

Abstract Compared to the traditional manufacturing methods such as extrusion, molding, etc., 3D printing technology can not only rapidly mold the product with complex and fine structure, but also realizes efficient manufacturing with different materials to meet the requirements on the functions and performance. Therefore, 3D printing has been attracted more attention, and more 3D printed products have been applied into people's lives, study, and work. Among all the raw materials used for 3D printing, polymer such as thermoset and thermoplastic polymer, has been mostly 3D printed and applied in the areas ranging from house decorations to micro/nano-electronic devices. However, the 3D printed polymers can only be used in mo-dels and non-structural materials due to their low strength and weak adhesion between printed layers. Nanomaterials such as cellulose nanocrystals, are often used as reinforcement in polymers to prepare high-strength 3D printed nanocomposites, which can be used in structural and functional applications. Cellulose nanocrystal is an ideal nano-enhancement material with wide sources, low price, renewable, and high strength. Hence, the application of nanomaterials in the 3D printed nanocomposites has been researched, meanwhile, the effect of nanomaterials on the properties of 3D-printed polymers was elaborately investigated. Researches were also focused on the modification of nanomaterial and development of new nanomaterials to improve the property of 3D printed nanocomposites and obtain functionality in the printed nanocomposites, and several fruitful results have been achieved. In addition, the structure-property-function relationship of 3D printed nanocomposites produced by stereolithography and fused deposition modeling, respectively, have been evaluated to provide a reliable reference for the extensive application of 3D printed nanocomposites. In this study, the 3D printing technology was briefly introduced. The basic principles and characteristics of 3D printing technology used in thermoset and thermoplastic polymers were introduced. Subsequently, the application of stereolithography and fused deposition modeling in the field of polymer nanocomposites were analyzed. Finally, the performance and applications of the printed nanocomposites were analyzed and summarized to establish a stable foundation for the wide application of 3D printed polymer nanocomposites.

Key words： 3D printing nanocomposites polymer stereolithography fused deposition modeling

Published: 14 July 2021

CLC number:

TQ327

Fund:This work was financially supported by the Natural Science Foundation of Jiangsu Province (BK20200779), Natural Science Research Project of Jiangsu Colleges and Universities (19KJB220004), and the Innovative Project of Yihua Life Co., Ltd. (YH-JS-JSKF-201904002).

About author:: Zhaozhe Yang, received her Ph.D. degree in biomass composites from Northeast Forestry University in 2018. In 2016—2017, she was a visiting Ph.D. student at Laval University in Prof. Denis Rodrigue’s group supported by China Scholarship Council. She is currently a research assistant in the Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry. Her research is mainly focused on biomass/epoxy composites.
Xinhao Feng, received his Ph.D. degree in biomass composites from Northeast Forestry University in 2018. In 2015—2017, he was a visiting Ph.D. student at University of Tennessee in Prof. Siqun Wang’s group supported by China Scholarship Council. He is a research assistant in the College of Furnishings and Industrial Design, Nanjing Forestry University. His research interests include wood modification, 3D printing nano-composites, and surface decoration of wooden products by 3D printing technology.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YANG Zhaozhe
	KONG Zhenwu
	WU Guomin
	WANG Siqun
	XIE Yanjun
	FENG Xinhao

Cite this article:

YANG Zhaozhe,KONG Zhenwu,WU Guomin, et al. Recent Advances in 3D Printed Polymer Nanocomposites[J]. Materials Reports, 2021, 35(13): 13177-13185.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.19120105 OR http://www.mater-rep.com/EN/Y2021/V35/I13/13177

1	Bourell D L. Annual Review of Materials Research,2016,46(1),1.
2	Lee K S, Kim R H, Yang D Y, et al. Progress in Polymer Science,2008,33(6),631.
3	Lu B H, Li D C. Machine Building & Automation,2013,42(4),1(in Chinese).
	卢秉恒,李涤尘.机械制造与自动化,2013,42(4),1.
4	Ligon S C, Liska R, Stampfl J, et al. Chemical Reviews,2017,117(15),10212.
5	Bose S, Ke D, Sahasrabudhe H, et al. Progress in Materials Science,2018,93,45.
6	Kong Y L, Gupta M K, Johnson B N, et al. Nano Today,2016,11(3),330.
7	Li J, Xu M, Bao W H. Journal of Northeast Forestry University,2015(6),1(in Chinese).
	李坚,许民,包文慧.东北林业大学学报,2015(6),1.
8	Farahani R D, Dubé M. Advanced Engineering Materials,2018,20(2),1700539.
9	Farahani R D, Dubé M, Therriault D. Advanced Materials,2016,28(28),5794.
10	Hull C W. U.S. patent,US4575330,1986.
11	Jacobs P F, Reid D T, Rapid prototyping & manufacturing—fundamentals of stereolithography, Society of Manufacturing Engineers, USA,1992.
12	Dippenaar D J, Schreve K. International Journal of Advanced Manufactu-ring Technology,2013,64(5-8),755.
13	Lipson H, Kurman M. Fabricated: the new world of 3D printing, Wiley, USA,2013.
14	American Society of Testing Materials International. Standard terminology for additive manufacturing technologies. USA,2012.
15	Hwang S. Study of materials and machines for 3D printed large-scale, flexible electronic structures using fused deposition modeling. Ph.D. Thesis, The University of Texas at El Paso, USA,2015.
16	Stansbury J W, Idacavage M J. Dental Materials,2016,32(1),54.
17	Gao W, Zhang Y, Ramanujan D, et al. Computer-aided Design,2015,69,65.
18	Wang X, Jiang M, Zhou Z, et al. Composites Part B Engineering,2017,110,442.
19	Torrado Perez A R. Defeating anisotropy in material extrusion 3D printing via materials development. Ph.D. Thesis, The University of Texas at El Paso, USA,2015.
20	Leigh S J, Bradley R J, Purssell C P, et al. Plos One,2012,7(11),e49365.
21	Farahani R D, Lebel L L, Therriault D. Journal of Micromechanics & Microengineering,2014,24(5),055020.
22	Invernizzi M, Natale G, Levi M, et al. Materials,2016,9(7),583.
23	Dellinger J G, Eurell J A, Stewart M, et al. Journal of Biomedical Materials Research Part A,2010,76A(2),366.
24	Beecroft M. In: IOP Conference Series-Materials Science and Enginee-ring. UK,2016,pp.012017.
25	Cesaretti G, Dini E, Kestelier X D, et al. Acta Astronautica,2014,93(1),430.
26	Shimoni A, Azoubel S, Magdassi S. Nanoscale,2014,6(19),11084.
27	Compton B G, Lewis J A. Advanced Materials,2014,26(34),5930.
28	Patra S, Young V. Cell Biochemistry & Biophysics,2016,74(2),93.
29	Guo S Z, Yang X, Heuzey M C, et al. Nanoscale,2015,7(15),6451.
30	Guo S Z, Qiu K, Meng F, et al. Advanced Materials,2017,29(27),1701218.
31	Kodama H. Review of Scientific Instruments,1981,52(11),1770.
32	Herbert A J. Journal of Applied Photographic Engineering,1982,8,185.
33	Feng X, Yang Z, Chmely S, et al. Carbohydrate Polymers,2017,169,272.
34	Kawata S, Sun H B, Tanaka T, et al. Nature,2001,412(6848),697.
35	Wohlers T T, Caffrey T, Wohlerss I. Additive manufacturing and 3D printing state of the industry: annual worldwide progress report, Wohlers Associates, USA,2013.
36	Tan Y W, Wang Y X, Cheng Y L. Die & Mould Industry,2013(4),69(in Chinese).
	谈耀文,王永信,程永利.模具工业,2013(4),69.
37	Li D F, Chen J M, Yuan Y P, et al. Journal of Beijing University of Technology,2015,41(12),1769(in Chinese).
	李东方,陈继民,袁艳萍,等.北京工业大学学报,2015,41(12),1769.
38	Melchels F P W, Feijen J, Grijpma D W. Biomaterials,2010,31(24),6121.
39	D’Urso P S, Earwaker W J, Barker T M, et al. British Journal of Plastic Surgery,2000,53(3),200.
40	Popov V K, Evseev A V, Ivanov A L, et al. Journal of Materials Science Materials in Medicine,2004,15(2),123.
41	Langer R, Vacanti J P. Science,2000,260(5110),920.
42	Dhariwala B, Hunt E, Boland T. Tissue Engineering,2004,10(9-10),1316.
43	Parandoush P, Lin D. Composite Structures,2017,182,36.
44	Crivello J V, Reichmanis E. Chemistry of Materials,2014,26(1),533.
45	Chopra K, Mummery P M, Derby B, et al. Biofabrication,2012,4(4),045002.
46	Manapat J Z, Mangadlao J D, Tiu B D, et al. ACS Applied Materials & Interfaces,2017,9(11),10085.
47	Chua C K, Leong K F, Lim C S. Rapid prototyping, principles and applications. World Scientific, Singapore,2003.
48	Wang Y, Ye C S, Huang S H. China Plastics Industry,2005,33(11),4(in Chinese).
	汪洋,叶春生,黄树槐.塑料工业,2005,33(11),4.
49	Liu Y Z J, Xia C L, Zhang J, et al. Engineering Plastics Application,2017,45(3),130(in Chinese).
	刘洋子健,夏春蕾,张均,等.工程塑料应用,2017,45(3),130.
50	Tang T M, Zhang Z, Deng J W, et al. New Chemical Materials,2015(6),228(in Chinese).
	唐通鸣,张政,邓佳文,等.化工新型材料,2015(6),228.
51	Turner B N, Strong R, Gold S A. Rapid Prototyping Journal,2014,20(3),192.
52	Wong K V, Hernandez A. ISRN Mechanical Engineering,2012,2012(2),30.
53	Ottway J R. Deviation comparisons of 3D printed features produced from material extrusion machines. Ph.D. Thesis, Indiana State University, USA,2015.
54	Jakus A E. Development and implementation of functional 3D-printed material systems for tissue engineering, energy, and structural applications. Ph.D. Thesis, Northwestern University, USA,2014.
55	Duan Y, Yuan Z, Tang Y, et al. Rapid Prototyping Journal,2011,17(4),247.
56	Feng X, Yang Z, Rostom S S H, et al. Journal of Applied Polymer Science,2017,134(31),45082.
57	Panwar A, Tan L P. Molecules,2016,21(6),685.
58	Nathan-Walleser T, Lazar I M, Fabritius M, et al. Advanced Functional Materials,2014,24(29),4706.
59	Kickelbick G. Progress in Polymer Science,2003,28(1),83.
60	Manias E. Nature Materials,2007,6(1),9.
61	Rahman A, Ali I, Zahrani S M A, et al. Nano,2011,6(3),185.
62	Gao Y M, Wang P, Wang S M, et al. Materials Science and Technology,2008,16(4),551(in Chinese).
	高延敏,汪萍,王绍明,等.材料科学与工艺,2008,16(4),551.
63	Peponi L, Puglia D, Torre L, et al. Materials Science & Engineering R,2014,85,1.
64	Fortunati E, Luzi F, Puglia D, et al. Carbohydrate Polymers,2013,97(2),837.
65	Marchessault R H, Morehead F F, Walter N M. Nature,1959,184(4686),632.
66	Dufresne A. Journal of Science & Technology for Forest Products and Processes,2012,2(6),6.
67	Habibi Y, Lucia L A, Rojas O J. Chemical Reviews,2010,110(6),3479.
68	Oksman K, Aitomki Y, Mathew A P, et al. Composites Part A Applied Science & Manufacturing,2016,83,2.
69	Habibi Y. Chemical Society Reviews,2014,43(5),1519.
70	Braun B, Dorgan J R. Biomacromolecules,2009,10(2),334.
71	Saini S, Belgacem M N, Bras J. Materials Science & Engineering C,2017,75,760.
72	Roy D, Semsarilar M, Guthrie J T, et al. Chemical Society Reviews,2009,38(7),2046.
73	Wu L Y, Luo L, Wen X M. Thermosetting Resin,2008,23(s1),22(in Chinese).
	吴良义,罗兰,温晓蒙.热固性树脂,2008,23(s1),22.
74	Kargarzadeh H, Mariano M, Huang J, et al. Polymer,2017,132,368.
75	Li X, Gao H, Scrivens W A, et al. Nanotechnology,2004,15(11),1416.
76	Santos M N D, Opelt C V, Lafratta F H, et al. Materials Science & Engineering A,2011,528(13-14),4318.
77	Marcovich N E, Auad M L, Bellesi N E, et al. Journal of Materials Research,2006,21(4),870.
78	Xu S, Girouard N, Schueneman G, et al. Polymer,2013,54(24),6589.
79	Bae J H, Kim S H. Polymer International,2015,64(6),821.
80	Secor E B, Ahn B Y, Gao T Z, et al. Advanced Materials,2015,27(42),6683.
81	Kokkinis D, Schaffner M, Studart A R. Nature Communications,2015,6,8643.
82	Farahani R D, Dalir H, Aissa B, et al. Composites Part A Applied Science & Manufacturing,2011,42(12),1910.
83	Adams J J, Duoss E B, Malkowski T F, et al. Advanced Materials,2011,23(11),1335.
84	Chung H, Das S. Materials Science & Engineering A,2008,487(1),251.
85	Gou M, Qu X, Zhu W, et al. Nature Communications,2014,5(3774),1.
86	Leigh S J, Purssell C P, Bowen J, et al. Sensors & Actuators A Physical,2011,168(1),66.
87	Compton B G, Hmeidat N S, Pack R C, et al. JOM,2018,70(3),292.
88	Chuang K C, Grady J E, Draper R D, et al. In: Proceedings of the Composites and Advanced Materials Exposition. USA,2015,pp.1.
89	Shofner M L, Lozano K, Rodríguez-Macías F J, et al. Journal of Applied Polymer Science,2003,89(11),3081.
90	Prashantha K, Roger F. Journal of Macromolecular Science: Part A-Chemistry,2017,54(1),24.
91	Chen Q, Mangadlao J D, Wallat J, et al. ACS Applied Materials & Interfaces,2017,9(4),4015.
92	Weng Z, Wang J, Senthil T, et al. Materials & Design,2016,102,276.
93	Dul S, Fambri L, Pegoretti A. Composites Part A,2016,85,181.