环形零件短流程铸辗复合成形技术研究进展

doi:10.11896/cldb.19080058

Abstract
Figure/Table
References
Related Citation (2)

Download:

Full Text ( PDF ) (23034KB)
Export: BibTeX | EndNote (RIS)

Abstract Ring-shape parts such as bearing and flange as the key connect piece, driving medium, rotating member and supporting structure are widely used in major equipment industrial including aerospace, wind power, high-speed rail, ship and high-end numerically-controlled machine. The production in rings is an energy-extensive consumption process. The current technique for ring production mainly includes two kinds: ⅰ) thick plate rolling, bending and welding. The significant stress concentration is presented in the welding areas, which leads to the weak properties in the poor service conditions with high-pressure and corrosion.ⅱ) smelting, ingot pouring, heating, casting, heating, cogging, cutting, rod heating, forging, punching, heating and hot ring rolling. The process is lengthly and the cost of equipments in cogging, forging and punching is huge. The serious energy-consumption and materials wasting in the current process go against environmentally friendly production because of repeatedly heating.
The coupling behavior of heat transfer-deformation-microstructure in hot ring rolling results in a complex development of multi-pass, continuous locality loading and unloading, uneven deformation and microstructural evolution with the function of multi-fields and factors. And the geometrical dimensions, microstructure and mechanical properties of the ring blank are significantly affected. As the application of rings develops to large-scale, light-weight, heavy-load and long-life, the demand for manufacturing in high-performance, precision and low cost are proposed. In recent years, the compact cast-rolling compound technique is studied in detail and useful results are obtained. In this process, the ring blank produced by sand casting or centrifugal casting is directly hot rolled. The cogging, forging and punching are leaved and only one heating is needed. Moreover, some advantages of short technological process and materials (above 30%) and energy-conservation (above 60%) are presented. Therefore, the compact process is the inevitable requirement of high-efficiency, high-performance and green manufacturing in the wind power flanges, the petrochemical pressure vessel and numerically-controlled machine base bearing. However, in the hot ring rolling, not only the geometrical dimension of the casting ring blank need to be obtained, but its microstructure and mechanical properties need to be improved and enhanced. A lot of technical challenges occur in the microstructure evolution and performance control of hot ring rolling. Analysis of single-and double-pass compression behavior of casting ring blank, the microstructure evolution rule and its modeling are conducted by researchers. The material constants in the constitutive models considering strain-compensation are established. Furthermore, the simulation of hot rolling with multi-fields coupling of heat transfer-deformation-microstructure, and cross-level coupling of grain topological and mesoscopic-microscopic cellular automaton (CA) are stu-died respectively in detail. The CA models considering grain space overlap is constructed. According to industrial tests, the textural development is introduced to study the control rule of microstructure and mechanical properties in hot rolling of casting ring blank. The grain refinement limitation in different areas of the hot rolled ring is obtained. The results contribute to the achievement of compact cast-rolling compound forming of rings.
The research progress on the hot rolling of as-forged ring blank and casting ring blank are summarized. The theories and methods on the integrated control of microstructure and mechanical properties of casting ring blank during the hot rolling are discussed. The crack initiation criterion and processing parameter control on the solidification of casting ring blank are established. The research trends on the hot rolling of the casting ring blank are proposed. The contents and key points in the hot rolling of duplex-metallic casting ring blank are elaborated. This study will promote the development of theory and technique on the integrated control of forming and modification in the compact cast-rolling compound manufacturing of ring parts.

Key words： as-cast ring blank hot ring rolling texture evolution crack control duplex-metallic rings

Published: 05 November 2020

CLC number:	TG331
	TG142

Fund:This work was financially supported by the National Natural Science Foundation of China (51875383, 51575371), Natural Science Foundation of Guangxi (2019GXNSFAA245051, 2018GXNSFBA281056), Science and Technology Major Project of Guangxi (2018AA23004, GKAA17202007), Research Foundation of Guilin University of Technology(GUTQDJJ2017140).

About author:: Fangcheng Qin is a lecturer and postgraduate supervisor of Guilin University of Technology. His research is mainly focused on the continuous and precision forming technique of metallic materials and the control of microstructure and performance in precision plastic forming. In recent years, Dr. Qin has been a leader or participant of five projects funded by the National Natural Science Foundation of China, the Natural Science Foundation of Guangxi Province and the corporation research for firms. Dr. Qin has published more than 20 papers in scientific journals, 13 of which are included in SCI/EI and has attained 10 invention patents.
Huiping Qi is an associate professor and postgraduate supervisor of Taiyuan University of Science and Technology. In recent years,her research is mainly focused on the new casting-rolling composite forming process of ring parts. Dr. Qi has been a leader of three projects funded by National Natural Science Foundation of China and two projects funded by Department of Science and Technology of Shanxi Pro-vince. She has participated in many important international academic conferences such as IMECE2015 and ICTP2017. Dr. Qi has won a second prize of Shanxi Pro-vince Science and Technology Progress,a second prize of Shanxi province technology invention and an honorable mention of China patent. Dr. Qi has published more than 30 papers and won 8 China invention patents.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	QIN Fangcheng
	QI Huiping
	LI Yongtang
	WU Yonghong
	QI Haiquan
	LIU Chongyu

Cite this article:

QIN Fangcheng,QI Huiping,LI Yongtang, et al. Advances in Compact Cast-Rolling Forming of Ring-shape Parts[J]. Materials Reports, 2020, 34(19): 19152-19165.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.19080058 OR http://www.mater-rep.com/EN/Y2020/V34/I19/19152

1 Hua L, Qian D S. Journal of Mechanical Engineering,2014,50(16),70(in Chinese).
华林,钱东升.机械工程学报,2014,50(16),70.
2 Yang H, Sun Z C, Zhan M, et al. Journal of Plasticity Engineering,2008,15(2),6(in Chinese).
杨合,孙志超,詹梅,等.塑性工程学报,2008,15(2),6.
3 Johnson W, Needham G. International Journal of Mechanical Sciences,1968,10(2),95.
4 Shao Y C, Hua L, Wei W T, et al. Materials Research Innovation,2013,7(1),49.
5 Shao Y C. Research on microstructure evolution law of cold ring rolling. Master's Thesis, Wuhan University of Technology, China,2010(in Chinese).
邵一川.冷轧环件微观组织演变规律研究.硕士学位论文,武汉理工大学,2010.
6 Yang D Y, Kim K H, Hawkyard J B. International Journal of Mechanical Sciences,1991,33(7),541.
7 Song J L, Dowson A L, Jacobs M H, et al. Journal of Materials Proces-sing Technology,2002,121(2-3),332.
8 Ryttberg K, Wedel M K, Recina V, et al. Materials Science and Engineering A,2010,527,2431.
9 Yeom J T, Jeoung H K, Park N K, et al. Journal of Material Processing Technology,2007,187-188,747.
10 Yada H, Senuma T. Journal of Japan Society of Technology Plasticity,1986,27,34.
11 Xu S G, Cao Q X. Journal of Material Processing Technology,1994,43,221.
12 Xu S G, Cao Q X, Lian J C. Journal of Plasticity Engineering,1994,1(2),24(in Chinese).
许思广,曹起骧,连家创.塑性工程学报,1994,1(2),24.
13 Sun Z C, Yang H, Ou X Z. Computational Materials Science,2010,49,134.
14 Zhang R. Investigation on recrystallization behavior of GCr15 bearing steel during hot ring rolling. Master's Thesis, Wuhan University of Technology, China,2014(in Chinese).
张瑞.GCr15轴承钢在热轧环过程中的再结晶行为研究.硕士学位论文,武汉理工大学,2014.
15 李永堂,齐会萍,杜诗文,等.中国专利,ZL201010132486.6.2010.
16 李永堂,齐会萍,刘志奇,等.中国专利,ZL201010132491.7.2010.
17 Li Y T, Ju Li, Qi H P, et al. Chinese Journal of Mechanical Enginee-ring,2014,27(2),418.
18 Li Y T, Qi H P, Li Q S, et al. Journal of Mechanical Engineering,2013,49(20),49(in Chinese).
李永堂,齐会萍,李秋书,等.机械工程学报,2013,49(20),49.
19 Qi H P, Li Y T. Chinese Journal of Mechanical Engineering,2012,25(5),853.
20 Qi H P, Li Y T, Hua L, et al. Journal of Mechanical Engineering,2014,50(14),75(in Chinese).
齐会萍,李永堂,华林,等.机械工程学报,2014,50(14),75.
21 Qin F C, Li Y T, Qi H P, et al.Journal of Materials Engineering and Performance,2016,25(3),1237.
22 Qin F C, Li Y T, Qi H P, et al. Journal of Materials Engineering and Performance,2016,25(11),5040.
23 Qin F C, Li Y T, Qi H P, et al. Chinese Journal of Mechanical Enginee-ring,2017,30(1),7.
24 Qin F C, Li Y T, Ju L. High Temperature Materials and Processes,2017,36(3),209.
25 Qin F C, Li Y T, Qi H P, et al. Journal of Materials Engineering and Performance,2017,26(3),1300.
26 Guo L G, Pan X, Yang H, et al. Heavy Machinery,2012(3),59(in Chinese).
郭良刚,潘霞,杨合,等.重型机械,2012(3),59.
27 Guo J, Qian D S, Deng J D.Journal of Materials Processing Technology,2016,231,151.
28 Guo Jun, Qian D S. Journal of Plasticity Engineering,2013,21(2),40(in Chinese).
郭俊,钱东升.塑性工程学报,2013,21(2),40.
29 Li Y T, Qi H P, Fu J H, et al. Journal of Mechanical Engineering,2013,49(6),198(in Chinese).
李永堂,齐会萍,付建华,等.机械工程学报,2013,49(6),198.
30 Medeiros S C, Prasad Y V R K, Frazier W G, et al. Materials Science and Engineering A,2000,293,198.
31 Na Y S, Yeom J T, Park N K, et al. Journal of Materials Processing Technology,2003,141,337.
32 Wang M T, Li X T, Du F S, et al. Materials Science and Engineering A,2004,379,133.
33 Wang M T, Li X T, Du F S, et al. Materials Science and Engineering A,2005,391,305.
34 Yin F, Hua L, Mao H J, et al. Materials and Design,2014,55,560.
35 Qin F C. Research on hot deformation and microstructure evolution of Q235B during casting-rolling compound forming for ring parts. Master's Thesis, Taiyuan University of Science and Technology, China,2014(in Chinese).
秦芳诚.环件铸辗复合成形中Q235B钢热变形及组织演变研究.硕士学位论文,太原科技大学,2014.
36 Jiang F L, Zhang H, Li L X, et al. Materials Science and Engineering A,2012,552,269.
37 Zhang H F, Shen B, Zhang H H. Shanghai Metals,2012,34(6),43(in Chinese).
张海峰,沈斌,张恒华.上海金属,2012,34(6),43.
38 Li H Z, Zeng M, Liang X P, et al. Transactions of Materials and Heat Treatment,2012,33(4),110(in Chinese).
李慧中,曾敏,梁霄鹏,等.材料热处理学报,2012,33(4),110.
39 Lin Q Q, Dong W Z, Li Y T, et al. Procedia Engineering,2014,81,1259.
40 Qian D S, Hua L, Zuo Z J. Journal of Materials Processing Technology,2007,187-188,734.
41 Guo L G, Yang H. Modeling and Simulation in Materials Science and Engineering,2005,13(7),1029.
42 Nassir A, Ali B. Journal of Materials Processing Technology,2010,210,1364.
43 Zhang F, Li Y T, Qi H P, et al. Forging Equipment and Technology,2011,2011(2),96(in Chinese).
张锋,李永堂,齐会萍,等.锻压装备与制造技术,2011,46(2),96.
44 Zhang F. Simulation of hot ring rolling based on an as-cast blank. Master's Thesis, Taiyuan University of Science and Technology, China,2011(in Chinese).
张锋.基于铸坯的环件热辗扩成形工艺数值模拟.硕士学位论文,太原科技大学,2011.
45 Han S P. Study on hot ring rolling process of as-cast Q235B flange blank. Master's Thesis, Taiyuan University of Science and Technology, China,2014(in Chinese).
韩素平.铸态Q235B钢法兰环件热辗扩成形工艺研究.硕士学位论文,太原科技大学,2014.
46 Deng C H. Study on simulation of radial-axial hot ring rolling of as-cast 25Mn blank. Master's Thesis, Taiyuan University of Science and Technology, China,2015(in Chinese).
邓潮鸿.25Mn铸环坯径轴向热辗扩成形数值模拟与工艺研究.硕士学位论文,太原科技大学,2015.
47 Ding S F. Modeling and multi-coupling simulation of cast-rolling compound forming of ring. Master's Thesis, Taiyuan University of Science and Technology, China,2014(in Chinese).
丁双凤.环件铸辗复合成形多场耦合作用下建模与仿真.硕士学位论文,太原科技大学,2014.
48 Li Y T, Di S F, Fu J H, et al. Transactions of Materials and Heat Treatment,2017,38(1),171(in Chinese).
李永堂,丁双凤,付建华,等.材料热处理学报,2017,38(1),171.
49 Cai Z X. Numerical study on hot ring rolling process of as-cast Q235B blank. Master's Thesis, Taiyuan University of Science and Technology, China,2015(in Chinese).
蔡中祥.基于铸态Q235B环件热辗扩成形工艺数值模拟研究.硕士学位论文,太原科技大学,2015.
50 Guo Y N, Li Y T, Guo Z, et al. Journal of Mechanical Engineering,2014,50(12),30(in Chinese).
郭一娜,李永堂,郭喆,等.机械工程学报,2014,50(12),30.
51 Guo Y N, Ding S F, Li Y T, et al. Journal of Mechanical Engineering,2014,50(14),81(in Chinese).
郭一娜,丁双凤,李永堂,等.机械工程学报,2014,50(14),81.
52 Li H W, Feng L, Yang H. Transactions of Nonferrous Metals Society of China,2013,23,3729.
53 Pi C H, Han J T, Xue Y D, et al. Chinese Journal of Mechanical Engineering,2006,42(3),15(in Chinese).
皮春华,韩静涛,薛永栋,等.机械工程学报,2006,42(3),15.
54 Asaro R J, Needleman A. Acta Metallurgica,1985,33,923.
55 Kalidindi S R, Anand L. International Journal of Mechanical Sciences,1992,34(4),309.
56 Lehmann E, Fabmann D, Loehnert S, et al. International Journal of Engineering Science,2013,68,24.
57 Bate P S, J. Fonseca Q. Materials Science and Engineering A,2004,380,365.
58 Lee S H, Lee D N. International Journal of Mechanical Sciences,2001,43,1997.
59 Li H W, Yangh, Sun Z C. International Journal of Plasticity,2008,24,267.
60 Qin F C Du S W, Li Y T, et al. Hot Working Technology,2013,42(18),76(in Chinese).
秦芳诚,杜诗文,李永堂,等.热加工工艺,2013,42(18),76.
61 Qin F C, Li Y T, Qi H P, et al. Journal of Mechanical Engineering,2015,36(7),96(in Chinese).
秦芳诚,李永堂,齐会萍,等.机械工程学报,2014,50(14),95.
62 Wang H Q. Study of control on radial-axial ring rolling for aluminium alloy. Master's Thesis, Harbin Institute of Technology, China,2014(in Chinese).
王恒强.铝合金环件径-轴向轧制成形控制技术研究.硕士学位论文,哈尔滨工业大学,2014.
63 Qin F C, Li Y T. Journal of Mechanical Engineering,2016,52(8),112(in Chinese).
秦芳诚,李永堂.机械工程学报,2016,52(8),112.
64 Qin F C, Qi H P, Li Y T, et al. Journal of Mechanical Engineering,2017,53(2),27(in Chinese).
秦芳诚,齐会萍,李永堂,等.机械工程学报,2017,53(2),27.
65 韩星会,华林,周光华,等.中国专利,ZL201310013103.7,2015.
66 秦芳诚,李永堂,齐会萍.中国专利,ZL201510610375.4,2017.
67 秦芳诚,李永堂,齐会萍.中国专利,ZL201710264730.6,2018.
68 Wang D L, Wu J H, Cai B, et al. Special Casting & Nonferrous Alloys,2018,38(3),288(in Chinese).
王冬林,吴金辉,蔡彬,等.特种铸造及有色合金,2018,38(3),288.
69 Ye F M, Jing X R, Guo M H, et al. Steel Pipe,2014,43(1),72(in Chinese).
叶富明,景旭冉,郭明海,等.钢管,2014,43(1),72.
70 Nazari J, Yousefi M, Kerahroodi M S A, et al. International Journal of Materials Lifetime,2015,1(1),20.
71 Zhou L, He J A, Xin Q B, et al. Journal of Northeastern University (Natural Science),2004,25(5),424(in Chinese).
周利,何奖爱,辛启斌,等.东北大学学报,2004,25(5),424.
72 Yao Sanjiu. Special Casting & Nonferrous Alloys,2002(2),44(in Chinese).
姚三九.特种铸造及有色合金,2002(2),44.
73 Xu J Z, Gao X J, Jiang Z Y, et al. The International Journal of Advanced Manufacturing Technology,2016,86,817.
74 Gao X J, Jiang Z Y, Wei D B, et al. Materials Science & Engineering A,2014,595,1.
75 Lee D J, Ahn D H, Yoon E Y, et al. Scripta Materialia,2013,68,893.
76 Wang T M, Cao F, Zhou P. Journal of Alloys and Compounds,2014,616,550.
77 Dhib Z, Guermazi N, Gaspérini M, et al. Materials Science & Enginee-ring A,2016,656,130.
78 Chen Y S, Du S L, Ning D Y, et al. Research on Iron & Steel,2016,44(2),21(in Chinese).
陈育生,杜顺林,宁德宇,等.钢铁研究,2016,44(2),21.
79 Du J J, Zhang X, Liu B X, et al. Materials Chemistry and Physics,2019,223,114.
80 Zhang B Y, Liu B X, He J N, et al. Materials Science & Engineering A,2019,740-741,92.
81 Wang C Y, Jiang Y B, Xie J X, et al. Materials Science & Engineering A,2017,708,50.
82 Tong J G, Gao X D, Qu H T, et al. Journal of University of Science and Technology Beijing,2009,31(4),451(in Chinese).
佟建国,高晓丹,曲海涛,等.北京科技大学学报,2009,31(4),451.
83 Vigraman T, Narayanasamy R, Ravindran D. Materials & Design,2012,35,156.
84 Zhang C, Li H, Li M Q. Journal of Materials Science & Technology,2016,32,259.