INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
Preparation and Oxidation Behavior of CeO2 Doped Si-B Composite Coatings |
ZHANG Yong1,2,3, ZHANG Gengfei1, ZHANG Yutao1, NING Fan1, CHAO Yi1, FENG Pengfa3
|
1 School of Material Science and Engineering, Chang'an University, Xi'an 710064, China 2 Postdoctoral Scientific Research Station of Mechanical Engineering, Chang'an University, Xi'an 710064, China 3 Technical Center, Jinduicheng Molybdenum Co., Ltd., Xi'an 710077, China |
|
|
Abstract The Si-B composite coatings with different doping amount of CeO2 were prepared on the surface of molybdenum substrate by two-step pack cementation methods. The effect of CeO2 doping on phase structure and cross-section morphology of Si-B composite coatings before and after oxidation at 1 150℃ were analyzed by XRD, EDS and SEM. The oxidation kinetics of Si-B composite coatings before and after CeO2 doping oxidized at 1 150℃ for 160 h were studied by mass-loss method. The results showed that appropriate doping amount of CeO2 had certain per-meation effect on Si element in pack cementation process. The Si-B composite coatings with thick, uniform and dense structure were obtained when the doping amount of CeO2 was fixed at 1wt%. However, the thickness of Si-B composite coatings decreased with the further increase of CeO2 doping amount. The oxidation rate constant (1.48×10-4 mg2/(cm4·h))of the doped Si-B composite coating oxidized at 1 150℃ for 70 h was significantly lower than that without CeO2 doping, which indicated that the Si-B composite coating doped with CeO2 has better high temperature oxidation resistance.
|
Published: 12 September 2020
|
|
Fund:This work was funded by the Science and Technology Program of Shaanxi Province (2020GY-278,2020ZDLGY12-07),the Special Fund for Basic ScientificResearch of Central Colleges, China (300102318206), the National Natural Science Foundation of China (51301023) and the National College Student Innovation and Entrepreneurship Training Program (201910710152). |
About author:: Yong Zhangreceived his Ph.D. degree from Central South University in 2012. He is currently an associate professor in Chang'an University. He mainly focuses on the research of formation and characterization of the strengthen layers/coatings on metal surface. He has published more than 30 academic papers, applied 5 patents and presided over 10 research projects including the National Natural Science Foundation of China. |
|
|
1 Xing K Y, Wang X, Li Z X, et al. Materials Protection, 2018, 51(12), 111(in Chinese). 邢开源, 汪欣, 李争显, 等. 材料保护, 2018, 51(12), 111. 2 Modec B, Košmrlj J. Inorganica Chimica Acta, 2019, 486, 766. 3 Niu F, Wang Y, Abbas I, et al. Ceramics International, 2017, 43(3), 3238. 4 Zhang Y, Wang X Y, Yu J, et al. Materials Reports A: Review Papers, 2017, 31(3), 83(in Chinese). 张勇, 王雄禹, 于静, 等. 材料导报:综述篇, 2017, 31(3), 83. 5 Yang K M, Wang J X, Yang S Y, et al. Surface and Coatings Technology, 2018, 354, 324. 6 Sun J, Li T, Zhang G P. Corrosion Science, 2019, 155, 146. 7 Riedl H, Vieweg A, Limbeck A, et al. Surface & Coatings Technology, 2015, 280, 282. 8 Sun R, Wang K S, Hu P,et al. Materials Reports A: Review Papers, 2016, 30(3),69(in Chinese). 宋瑞, 王快社, 胡平, 等. 材料导报:综述篇, 2016, 30(3),69. 9 Jiang J, Zhou T, Shao W, et al. Journal of Alloys and Compounds, 2019, 786, 920. 10 Sahu J N, Sasikumar C. Journal of Materials Processing Technology, 2019, 263, 285. 11 Jonnalagadda K P, Eriksson R, Li X H, et al. Journal of the European Ceramic Society, 2019, 39(5),1869. 12 Boissonnet G, Bonnet G, Pasquet A, et al. Journal of the European Ceramic Society, 2019. 39(6), 2111. 13 Sun J, Fu Q G, Guo L P, et al. Materials & Design, 2016, 92, 602. 14 Zhang P, Guo X, Zhang C, et al. International Journal of Refractory Metals & Hard Materials, 2017, 67, 32. 15 Dai L, Yu Y, Zhou H, et al. Ceramics International, 2015, 41(10), 13663. 16 Xiao L R, Zhang B, Cai Z Y, et al. Rare Metal Materials and Enginee-ring, 2018, 47(11), 141(in Chinese). 肖来荣, 张贝, 蔡圳阳, 等. 稀有金属材料与工程, 2018, 47(11), 141. 17 Kuznetsov S A, Rebrov E V, Mies M J M, et al. Surface and Coatings Technology, 2006, 201(3-4), 971. 18 Lange A, Heilmaier M, Sossamann T A, et al. Surface & Coatings Technology, 2015, 266, 57. 19 Wang Y, Yan J, Wang D. International Journal of Refractory Metals & Hard Materials, 2017, 68,60. 20 Tian X, Guo X, Sun Z, et al. Journal of Rare Earths, 2016, 34(9),952. 21 Ning F, Zhang Y, Wang X Y, et al. Hot Working Technology, 2019, 48(4), 141(in Chinese). 宁璠, 张勇, 王雄禹, 等. 热加工工艺, 2019, 48(4), 141. 22 Castano C E, O'Keefe M J, Fahrenholtz W G. Current Opinion in Solid State and Materials Science, 2015, 19(2),69. 23 Wang X Y, Zhang Y, Zhi L, et al. Hot Working Technology, 2018, 47(6),161(in Chinese). 王雄禹, 张勇, 支龙, 等. 热加工工艺, 2018, 47(6),161. 24 Zhu L C, Tang G B, Shi Q, et al. Chinese Journal of Applied Chemistry, 2005, 22(7), 715(in Chinese). 朱连超, 唐功本, 石强, 等. 应用化学, 2005, 22(7), 715. 25 Wang Y, Wang D Z, Yan J H. Journal of Alloys and Compounds, 2014, 589(9), 384. 26 Wang Y. Preparation and properties of Mo-based alloys oxidation resis-tance coatings at elevated temperature.Ph.D. Thesis, Central South University, China, 2014(in Chinese). 汪异. 钼基合金高温抗氧化涂层的制备及其性能研究. 博士学位论文, 中南大学, 2014. 27 Ouyang G Y, Ray P K, Thimmaiah S. Applied Surface Science, 2019, 470, 289. 28 Alam M Z, Venkataraman B, Sarma B, et al. Journal of Alloys and Compounds, 2009, 487(1-2), 335. 29 Yoon J, Kim G, Byun J, et al. Surface & Coatings Technology, 2001, 148(2), 129. 30 Li M S. High temperature corrosion of metals, Metallurgical Industry Press, China, 2001(in Chinese). 李美栓. 金属的高温腐蚀, 冶金工业出版社, 2001. |
[1] |
LI Shilei, HU Ping, DUAN Yi, ZUO Yegai, XING Hairui, LI Hui, DENG Jie, FENG Pengfa, WANG Kuaishe, HU Boliang. Research Status of the Effect of Doping Methods on Microstructure and Mechanical Properties of Molybdenum Alloy[J]. Materials Reports, 2020, 34(9): 9132-9142. |
|
|
|
|