METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
Continuous Cooling Transformation Behaviors and Bainite Transformation Kinetics of X80 Pipeline Steel During the Second Thermal Cycle |
TANG Li1, YIN Limeng1, WANG Jinzhao1, LIU Cheng1, WANG Xuejun2
|
1 School of Metallurgy and Materials Engineering, Chongqing University of Science and Technology, Chongqing 401331 2 Sichuan Oil and Gas Construction Engineering Co., Ltd, Chengdu 610041 |
|
|
Abstract Based on the welding thermal simulation of X80 pipeline steel by using DIL805A/D quenching dilatometers, the microstructure and hardness of X80 pipeline steel with different continuous cooling rates were obtained by means of OM, SEM, TEM and micro-hardness testing, and continuous cooling transformation curves of X80 heat-affected zone (SHCCT curves) during the second thermal cycle was determined. The bainite transformation mechanism and bainite transformation kinetics were studied by means of kinetic analysis. In addition, the regression model of phase transformation point-cooling rate was established, also, quantitative equations between the phase transformation point (including the start temperature for bainite transformation Bs, the start temperature for martensite transformation Ms, the finish temperature for phase transformation Tf) and the cooling rate with high fit degree was obtained by regression calculation. The results show that the most dominant microstructure of X80 pipeline steel after the second thermal cycle at different cooling rates appears successively such as, proeutectoid ferrite (0.5—1 ℃/s), bainite (5—50 ℃/s), lath martensite (75 ℃/s and above cooling rates), especially. When the cooling rate is less than 100 ℃/s, the hardness increases with the increase of cooling rate. On the contrary, the hardness remains at about 332.5HV1 when the cooling rate exceeds 100 ℃/s. As the volume fraction of bainite transformation (fb) increases, the local activation energy decreases and the average energy is about 108.6 kJ/mol, and the dominating mechanism of bainite transformation is the two-dimensional and one-dimensional growth.
|
Published: 31 July 2019
|
|
Fund:This work was financially supported by the National Natural Science Foundation of China (51674056). |
About author:: Li Tang, female, born in 1993, is a postgraduate student, published 2 journal papers, and presided over a National Science and Technology Innovation Project for Postgraduate Students. Limeng Yinobtained his Ph.D. degree in material processing engineering from the South China University of Technology in Jun. 2009. He served in School of Metallurgy and Materials Engineering, Chongqing University of Science and Technology till now upon graduation, and is currently a professor and master supervisor and subdecanal. His research interests focus on the welding technology and simulation of high performance oil and gas pipe, and electronic packaging materials and reliability. He performed collaborative research in 2011—2012 in University of Maryland, College Park. He obtained 4 science and technology progress awards of province and ministry as the first author, and performed more than 10 projects, including the Natural Science Foundation of China (General Program), Provincial or Ministry level Projects. In addition, he has published more than 50 journal papers, applied 10 national invention patents and 4 of them were authorized, and he is also a reviewer of several academic journals. |
|
|
[1] |
Sharma S K, Maheshwari S. Journal of Natural Gas Science and Engineering, 2017, 38, 203.
|
[2] |
Witek M. Journal of Natural Gas Science and Engineering, 2015, 27(1), 374.
|
[3] |
Deng W, Gao X H, Qin X M, et al. Acta Metallurgica Sinica, 2010, 46(8), 959(in Chinese).邓伟, 高秀华, 秦小梅,等. 金属学报, 2010, 46(8), 959.
|
[4] |
Miao C L, Shang C J, Wang X M, et al. Acta Metallurgica Sinica, 2010, 46(5), 541(in Chinese).缪成亮, 尚成嘉, 王学敏, 等.金属学报, 2010, 46(5), 541.
|
[5] |
Bi Z Y. Welding Technology for Line Pipe, Petroleum Industry Press, China,2013(in Chinese).毕宗岳. 管线钢管焊接技术, 石油工业出版社, 2013.
|
[6] |
Zhu Z, Han J, Li H. Metallurgical and Materials Transactions A, 2015, 46(11), 5467.
|
[7] |
Lan L, Kong X, Qiu C. Materials Characterization, 2015, 105(5), 95.
|
[8] |
Cizek P, Wynne B P, Davies C H J, et al. Metallurgical and Materials Transactions A, 2015, 46(1), 407.
|
[9] |
Gianetto J A, Fazeli F, Chen Y, et al. In: Proceedings of the 2014 10th International Pipeline Conference. Calgary, 2014,pp.V003T07A035.
|
[10] |
Li X, Ma N, Xu X, et al. Quarterly Journal of the Japan Welding Society, 2013, 31(4), 109s.
|
[11] |
Cai H J, Gao Z, Song R B, et al. Transactions of Materials and Heat Treatment, 2015, 36(3), 214(in Chinese).蔡恒君, 高喆, 宋仁伯,等.材料热处理学报, 2015, 36(3), 214.
|
[12] |
Li C, Wang Y, Chen Y. Journal of Materials Science, 2011, 46(19), 6424.
|
[13] |
Nie W J, Shang C J, You Y, et al. Acta Metallurgica Sinica, 2012, 48(7), 797(in Chinese).聂文金, 尚成嘉, 由洋, 等.金属学报, 2012, 48(7), 797.
|
[14] |
Chen C X, Li W S, Wang Q P, et al. Journal of Materials Engineering, 2005(5), 22(in Chinese).陈翠欣, 李午申, 王庆鹏, 等. 材料工程, 2005(5), 22.
|
[15] |
Zheng Y F, Wu R M, Li X C, et al. Materials Science and Technology, 2017, 33(4), 454.
|
[16] |
Sung H K, Shin S Y, Hwang B, et al. Metallurgical and Materials Transactions A, 2011, 42(7), 1827.
|
[17] |
Takayama N, Miyamoto G, Furuhara T. Acta Materialia, 2012, 60(5), 2387.
|
[18] |
Chen X W, Liao B, Qiao G Y, et al. Journal of Iron and Steel Research, International, 2013, 20(12), 53.
|
[19] |
Okaguchi S, Ohtani H, Ohmori Y. Materials Transactions, 1991, 32(8), 697.
|
[20] |
Cizek P, Wynne B P, Davies C H J, et al. Metallurgical and Materials Transactions A, 2002, 33(5), 1331.
|
[21] |
Quidort D, Bréchet Y. Scripta Materialia, 2002, 47(3), 151.
|
[22] |
Li X C, Zheng Y F, Wu X C. Materials Review B:Reseach Papers, 2017, 31(3), 86(in Chinese).李晓成, 郑亚风, 吴晓春. 材料导报:研究篇, 2017, 31(3), 86.
|
|
|
|