等离子喷涂层微观成形过程数值模拟研究现状

doi:10.11896/cldb.18060081

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (2620KB)
Export: BibTeX | EndNote (RIS)

Abstract Plasma spraying is characterized by the high temperature of flame flow, fast particle velocity and high energy density, which is one of the common surface engineering techniques for surface strengthening and remanufacturing of parts and has important applications in many fields, such as wear-resisting, anti-corrosion and thermal barrier. The service performance and life of the product is often determined by the quality of the coating. The forming quality of plasma spraying coating is determined by the cross-coupling of many spray elements and process parameters. The traditional method of optimizing spraying process is to determine the feasible region of main process parameters according to practical experience, which has to adjust the progress parameters and test the performance of the coating over and over again. This method has the disadvantage of high cost, low efficiency and poor reliability. Numerical simulation is a high-efficiency, low-cost scientific research method. In the field of plasma spraying, it can not only optimize the spraying process parameters, but also help deeply understand the principle of spray forming and the process of coating microcosmic construction. With the help of numerical simulation, the researchers have explored the microscopic mechanism of the plasma spraying process, the transient and high-speed phenomena which could not be observed in experiment. What’s more, it can also guide the optimization of spray process parameters, improve the mechanical structure of the spray gun, and play an important role in improving the coating quality and performance. This paper summarizes the research steps of finite element simulation in numerical simulation and reviews the micro-forming process of plasma sprayed coating in recent research state of numerical simulation. As for the numerical simulation of plasma jet formation, the research field has transformed from a single physics field to a multi-physics coupling. By this mean, it can accurately grasp the complex physical phenomena in plasma spray guns. The numerical simulation ranges includes temperature field simulation of plasma jet, turbulent flow simulation, and electromagne-tic characteristic simulation. For the numerical simulation of the interaction between spray particles and jets, the researchers have explored the influence of spraying particles and atmospheric physical parameters on the flight process in combination with experiments, and obtained the best spraying distance, powder feed tube angle and other technological parameters. The numerical simulation ranges include particle acceleration simulation, heating process simulation, flight track and spatial distribution simulation in plasma jet. In the numerical simulation of the solidification and spreading process of sprayed particle, it can visualize the instantaneous, high-speed spread solidification process, and grasp the influence of substrate and atmospheric physical parameters on the process. The numerical simulation ranges includes the simulation of impact deposition process and the solidification growth process of particle. There are some problems in the numerical simulation, which are the inaccuracy of the turbulence model, the superficial research on the evaporation and fragmentation phenomena of flying-particles, and the less exploration of multiple particles overlap stacking processes. It prospects the research direction of the numerical simulation in the micro-forming process of plasma coatings and proposes the conception of establishing a virtual coating forming system, which is based on the numerical simulation of the spray forming process.

Key words： plasma spraying coating forming numerical simulation flying particle heat and mass transfer

Published: 21 May 2019

CLC number:

TG148

Fund:This work was financially supported by the National Natural Science Foundation of China (51675531, 51535011), Natural Science Foundation of Beijing, China (3172038).

About author:: Shuyu Ding received his B.E. degree in Academy of Armored Forces Engineering in 2017. He is currently pursuing his Master Degree at the National Key Lab for Remanufacturing, Army Academy of Armored Forces under the supervision of academician Binshi Xu, researcher Haidou Wang and associate researcher Guozheng Ma. His research has focused on surface engineering.Guozheng Ma received his B.E. degree in Northwes-tern Polytechnical University in 2008 and received his M.S. and Ph.D. degrees in National Key Laboratory for Remanufacturing at Academy of Armored Forces, China, in 2010 and 2014, respectively. And then, he joined the National Key Laboratory for Remanufacturing. He is supported by Yong elite scientists sponsor ship program by CAST. He is currently an associate researcher and Master tutor. His research interests include surface engineering, remanufacturing and tribology.Haidou Wang received his Ph.D. degree in Department of Mechanical Engineering from Tsinghua University in 2003. He joined the National Key Laboratory for Remanufacturing at Academy of Armored Forces from then on. He is a researcher, Ph.D. supervisor and the deputy director of the laboratory. He is the National Outstan-ding Youth Science Fund Winner and Chief Scientist of National Defense 973 Program. His current research areas cover the surface engineering, remanufacturing and tribology.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	DING Shuyu
	MA Guozheng
	XU Binshi
	WANG Haidou
	CHEN Shuying
	HE Pengfei
	WANG Yiwen

Cite this article:

DING Shuyu,MA Guozheng,XU Binshi, et al. Research Status on Numerical Simulation of Plasma Spraying Coating in Micro-forming Process[J]. Materials Reports, 2019, 33(11): 1889-1896.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.18060081 OR http://www.mater-rep.com/EN/Y2019/V33/I11/1889

1 Vardelle A, Moreau C, Akedo J, et al. Journal of Thermal Spray Technology,2016,25(8),1376.
2 Wang H D, Chen S Y, Ma G Z, et al. Journal of Mechanical Enginee-ring,2017,53(24),1(in Chinese).
王海斗,陈书赢,马国政,等.机械工程学报,2017,53(24),1.
3 Bobzin K, te M, Knoch M A, et al. In: Conference Record of the 14th High-Tech Plasma Processes Conference. Neubiberg,2017.
4 Peng P, Song H, Zhang T, et al. Computers & Chemical Engineering,2017,97,183.
5 Balachandran K, Matar M, Trujillo J J. Journal of Control and Decision,2016,3(4),267.
6 Votta E, Presicce M, Della Corte A, et al. International Journal for Numerical Methods in Biomedical Engineering,2016,33(9),e02849.
7 Qiao J H, Bolot R, Liao H, et al. International Journal of Thermal Sciences,2013,65(65),120.
8 Lazzaroni C, Baba K, Nikravech M, et al. Journal of Physics D: Applied Physics,2017,45(48),485207.
9 Ivchenko D, Zhang T, Mariaux G, et al. Journal of Thermal Spray Technology,2018,27(1-2),3.
10 Ranjbar-Far M, Absi J, Mariaux G, et al. Materials & Design,2010,31(2),772.
11 Fan Q, Lu W, Wang F. Journal of Materials Processing Technology,2005,166(2),224.
12 Abderrahmane A, Sahnoun M, Ganaoui M E. European Physical Journal Applied Physics,2017,78(3),4815.
13 Trelles J P, Pfender E, Heberlein J V R. Journal of Physics D: Applied Physics,2007,40(18),5635.
14 Pei W, Wei Z, Zhao G, et al. Computational Materials Science,2015,103(9),8.
15 Benramoul L, El-Hadj A A. Applied Surface Science,2011,258(2),962.
16 Zhang Y. Research of jet characteristic and drop spreading solidification behavior in plasma spraying process. Ph.D. Thesis, Southwest Petroleum University, China,2015(in Chinese).
张勇.等离子喷涂射流特性及熔滴铺展凝固行为研究.博士学位论文,西南石油大学,2015.
17 Trelles J P. Plasma Sources Science & Technology,2013,22(22),5017.
18 Alaya M, Chazelas C, Mariaux G, et al. Journal of Thermal Spray Technology,2015,24(1-2),3.
19 Lisnyak M, Cunha M D, Bauchire J M, et al. Journal of Physics D: Applied Physics,2017,50(31),315203.
20 Hu F S, Wei Z Y, Liu B L, et al. Materials Science & Technology,2013,21(2),137(in Chinese).
胡福胜,魏正英,刘伯林,等.材料科学与工艺,2013,21(2),137.
21 Trelles J P. IEEE Transactions on Plasma Science,2011,39(11),2870.
22 Trelles J P. IEEE Transactions on Plasma Science,2014,42(10),2852.
23 Hu F S, Wei Z Y, Tan C, et al. Journal of Xi’an Jiaotong University,2013,47(9),92(in Chinese).
胡福胜,魏正英,谭超,等.西安交通大学学报,2013,47(9),92.
24 Chazelas C, Trelles J P, Choquet I, et al. Plasma Chemistry & Plasma Processing,2017,37(3),627.
25 Keith D’Sa, Rao L, Munz R J. Journal of Thermal Spray Technology,2008,17(4),574.
26 Trelles J P. Journal of Physics D Applied Physics,2013,46(25),255201.
27 Li H P, Chen X. Plasma Chemistry & Plasma Processing,2002,22(1),27.
28 Colombo V, Concetti A, Ghedini E, et al. IEEE Transactions on Plasma Science,2011,39(11),2894.
29 Shigeta M. Journal of Physics D Applied Physics,2013,46(46),5401.
30 Meillot E, Vincent S, Caruyer C, et al. Journal of Thermal Spray Technology,2009,18(5-6),875.
31 Alaya M, Chazelas C, Vardelle A. Journal of Thermal Spray Technology,2016,25(1-2),36.
32 Mentel J, Heberlein J. Journal of Physics D Applied Physics,2010,43(2),3002.
33 Semenov I L, Krivtsun I V, Reisgen U. Journal of Physics D Applied Physics,2016,49(10),5204.
34 Almeida N A, Cunha M D, Benilov M S. Journal of Physics D Applied Physics,2017,50(38),5203.
35 Chazelas C, Trelles J P, Vardelle A. Journal of Thermal Spray Technology,2017,26(1-2),3.
36 Zhou Q H. Numerical Simulation of Plasma Torch. Ph.D. Thesis, Fudan University, China,2009(in Chinese).
周前红.直流电弧等离子体炬的数值模拟.博士学位论文,复旦大学,2009.
37 Tan C, Wei Z Y, Wei P, et al. Journal of Xi’an Jiaotong University,2014,48(6),91(in Chinese).
谭超,魏正英,魏培,等.西安交通大学学报,2014,48(6),91.
38 Zhang N N, Lin D Y, Li Y L, et al. Journal of Iron and Steel Research(International),2017,24(3),306.
39 Ardkani E S. Numerical and Experimental Study of the Arc Fluctuations in a DC plasma Torch. Ph.D. Thesis, Toronto University, Canada,2016.
40 Shang S, Guduri B, Cybulsky M, et al. Journal of Physics D: Applied Physics,2014,47(40),5206.
41 Saito H, Nakane Y, Fujino T, et al. Journal of Fluid Science & Technology,2016,11(4),JFST0024.
42 Kanta A F, Planche M P, Montavon G, et al. Surface & Coatings Technology,2010,204(9),1542.
43 Zhang H, Hu S, Wang G. Surface & Coatings Technology,2006,201(3-4),886.
44 Wei P, Wei Z, Zhao G, et al. Heat & Mass Transfer,2016,52(9),1739.
45 Feng L J, Cao K B, Lei A L. Hot Working Technology,2006,35(11),46(in Chinese).
冯拉俊,曹凯博,雷阿利.热加工工艺,2006,35(11),46.
46 Tan C, Wei Z Y, Wei P, et al. Journal of Propulsion Technology,2016,37(5),930(in Chinese).
谭超,魏正英,魏培,等.推进技术,2016,37(5),930.
47 Zhang W, Zheng L L, Zhang H, et al. Plasma Chemistry & Plasma Processing,2007,27(6),701.
48 Chen D, Wang Y, Bai Y, et al. Journal of Inorganic Materials,2015,30(1),65.
陈丹,王玉,白宇,等.无机材料学报,2015,30(1),65.
49 Alavi S, Passandideh-Fard M, Mostaghimi J. Journal of Thermal Spray Technology,2012,21(6),1278.
50 Zhang Y, Xu J N, Han C C, et al. Materials Science and Engineering of Powder Metallurgy,2017,22(3),313(in Chinese).
张勇,徐建宁,韩成才,等.粉末冶金材料科学与工程,2017,22(3),313.
51 Zhang Y, Matthews S, Hyland M. Journal of Physics D Applied Physics,2017,50(27),5601.
52 Zhang Y, Matthews S, Hyland M. International Journal of Heat & Mass Transfer,2017,115,488.
53 Kang C W, Tan J K, Pan L, et al. Applied Surface Science,2011,257(24),10363.
54 El-Hadj A A, Zirari M, Bacha N. Applied Surface Science,2010,257(5),1643.
55 Zhang M Y, Zhang H, Zheng L L. International Journal of Heat & Mass Transfer,2008,51(13),3410.
56 Li B X, Li X H, Chen M. Physics of Fluids,2017,29(1),2003.
57 Danouni S, El-Hadj A A, Zirari M, et al. Applied Surface Science,2016,371,213.
58 Xiong H B, Zhu J. Journal of Hydrodynamics Ser B,2010,22(5),150.
59 Yokoi K. Soft Matter,2011,7(11),5120.
60 Tran A T T, Hyland M M. Journal of Thermal Spray Technology,2010,19(1-2),11.
61 Tabbara H, Gu S. International Journal of Heat & Mass Transfer,2012,55(7-8),2081.
62 Kumar A, Gu S, Tabbara H, et al. Surface & Coatings Technology,2013,220(15),164.
63 Zhang Y, Matthews S, Tran A T T, et al. Surface & Coatings Technology,2016,307,807.
64 Zirari A, El-Hadj A, Bacha N. Applied Surface Science,2010,256(11),3581.
65 Liu H, Jazi H R S, Bussmann M, et al. Acta Materialia,2009,57(20),6013.
66 Fukanuma H, Huang R, Tanaka Y, et al. Journal of Thermal Spray Technology,2009,18(5-6),965.
67 Zheng Y Z, Li Q, Zheng Z H, et al. Applied Surface Science,2014,317,526.
68 Xing Y, Jiang C, Hao J, et al. Reviews on Advanced Materials Science,2013,33,276.
69 Liao Y M, Zheng Y Z, Zheng Z H, et al. Applied Physics A,2016,122(7),654.
70 Zheng Z H, Li Q. Materials For Mechanical Engineering,2015,39(12),75(in Chinese).
郑振环,李强.机械工程材料,2015,39(12),75.