云母微晶玻璃复合材料的研究进展

doi:10.11896/cldb.18040140

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (1909KB)
Export: BibTeX | EndNote (RIS)

Abstract Mica-based glass-ceramics (MGCs) have gained extensive interests due to some interesting features of good machinability, high thermal shock resistance and fracture toughness etc., especially the machinability, exhibiting a variety of engineering applications. However, the MGCs show low strength because of the weak bonds between the layer structures of mica crystals. Therefore, it has always been one of the key points to increasing the strength in investigation of MGCs for many years. Up to now, there have been many methods to increase the strength of MGCs, in which, the strength could be increased by:(i) increasing the bonding force between the interlayers of mica structure by introducing the varieties of ions; (ii) tailoring the microstructure by adjusting the composition of base glasses and thermal treatments; (iii) the preferential crystallization by extruding or hot pressing processes, and (iv) fabricating the composites by adding or precipitating reinforced second phases. Among them, the MGC composites have been made obvious advances because of the wide choices of the reinforced phases, the controlled adding amounts and the improved excellent properties.
The reinforced phases in MGC composites mainly include two types: particle and fiber. The particle phases compose inert particles that they are inert, there are not phase transition of themselves and would not react with components of parent glasses in the fabricating processes of MGC composites, un-active particles that they could not take place phase transition of themselves but might react with components of parent glasses, and active particles that they could react of themselves or with components of parent glasses. Those particles were introduced into composites by adding into base glasses or parent glasses before the thermal treatment. The formation of particle reinforced phases could influence the sintering processes of MGC composites by changing the components of composites or compositions of the parent glasses, or altering the crystallizing cha-racteristics owing to the reaction between particles and glasses. In particle-reinforced MGC composites, the types of particles and the precipitation of particles are two significant factors that influence the final properties of MGC composites. The choices of reinforced particles and MGC compo-sites with special functions will be main aspects to be explored.
The fibers were usually introduced into composites by mixing with grains of the parent glasses before thermal treatment. The addition of the fibers were beneficial to improve the toughness strength of MGC materials. Nowadays, carbon fiber, SiO₂/Al₂O₃ fiber and AlN fiber have been reported to be used for the fabrication of MGC composites. In fiber-reinforced MGC composites, the interfaces bonding between fiber and the parent glasses is a key factor, which affects the properties of MGC composites.
In this paper, the development of MGC composites is reviewed. The varieties, preparation and properties of the MGC composites are summarized, in which, the effects and characteristics of the reinforced phases are emphasisly discussed. Also the development trends of MGC compo-sites are referred.

Key words： mica-contained glass-ceramics composites machinability powder fiber

Published: 14 June 2019

CLC number:

TQ171

Fund:This work was financially supported by the National Natural Science Foundation of China (51375281).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	TIAN Qingbo
	LI Chunzhen
	LI Haiwen
	WANG Yue
	LYU Zhijie

Cite this article:

TIAN Qingbo,LI Chunzhen,LI Haiwen, et al. An Overview on Study of the Mica-based Glass-Ceramic Composites[J]. Materials Reports, 2019, 33(13): 2191-2196.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.18040140 OR http://www.mater-rep.com/EN/Y2019/V33/I13/2191

Abdel-Hameed S A M, Ismail N, Youssef H F, et al.International Journal of Hydrogen Energy, 2017, 42(10), 6829.2 Xia A, Miao H Y, Tan G Q.Materials Review, 2005, 19(s2), 395(in Chinese).夏傲, 苗鸿雁, 谈国强. 材料导报, 2005, 19(s2), 395.3 Gali S, Ravikumar K, Murthy B V S, et al.Dental Materials, 2018, 34(3), e36.4 Wei W, Liu Y, Tan Y, et al.Materials Today Communications, 2017, 11, 87.5 Chen X F, Zhang X K, Teng L D, et al.Journal of the Chinese Ceramic Society, 1993, 21(3), 247(in Chinese).陈晓峰, 张晓凯, 滕立东, 等.硅酸盐学报, 1993, 21(3), 247.6 El-Meliegy E M.Ceramics International, 2004, 30(6), 1059.7 Taruta S, Watanabe K, Kitajima K, et al.Journal of Non-Crystalline Solids, 2003, 321(1-2), 96.8 Beall G H. In: The American Ceramic Society, Hench L L, Freiman S W, eds. Westerville, Ohio, 1972, pp. 25.9 Grossman D G. Journal of the American Ceramic Society, 1972, 55(9), 446.10 Cheng J S, Li H, Tang L Y, et al.Glass ceramics, Chemical Industry Press, China, 2007 (in Chinese).程金树, 李宏, 汤李缨, 等.微晶玻璃, 化学工业出版社, 2007.11 Nassara A M, Hamzawy E M A, Hafez F M, et al.Ceramics International, 2012,38,(3), 1921.12 Ercenk E, Yilmaz S. Journal of Ceramic Processing Research, 2015, 16(1), 169. 13 Casasola R, Pérez J M, Romero M. Journal of the American Ceramic Society, 2016, 99(2), 484.14 Mukherjee D P, Kumar Das S.Advanced Science Letters, 2016, 22 (1), 202.15 Salman S M, Salama S N, Abo-Mosallam H A.Ceramics International, 2017, 43(12), 9424.16 Henry J, Chen X J, Law R V, et al. Journal of the European Ceramic Society, 2018, 38(1), 245. 17 Garai M, Sasmal N, Molla A R, et al.Journal of Materials Science, 2014, 49(4), 1612.18 Mallik A, Basumajumdar A, Kundu P, et al.Ceramics International, 2013, 39(3), 2551. 19 Henry J, Hill R G.Journal of Materials Science, 2004, 39(7), 2499.20 Henry J, Hill R G. Journal of Materials Science, 2004, 39(7), 2509.21 Roy S, Basu B. Trends in Biomaterials & Artificial Organs, 2006, 20(1), 90.22 Xiang Q, Liu Y, Sheng X, et al.Dental Materials, 2007, 23(2), 251.23 Qiao G J, Wang Y L, Jin Z H, et al.Journal of Inorganic Materials, 1996, 11(1), 29 (in Chinese).乔冠军, 王永兰, 金志浩, 等.无机材料学报, 1996, 11(1), 29.24 Baik D S, No K S, Chun J S, et al.Journal of the American Ceramic Society, 1995, 78(5), 1217.25 Kr manc M M, Do ler U, Suvorov D, et al.Journal of the American Ceramic Society, 2012, 95(6), 1920.26 Wang P, Yu L, Xiao H, et al. Ceramics International, 2009, 35(7), 2633.27 Wu S, Zhou Q, Wang Y J, et al.Ceramics International, 2013, 39(4), 4187.28 Taira M, Yamaki M.British Ceramic Transaction, 1995, 9(3), 109.29 Alizadeh P, Eftekhari Yekta B, Gervei A.Journal of the European Cera-mic Society, 2004, 24 (13), 3529.30 Yu L, Xiao H, Cheng Y. Ceramics International, 2008, 34(1), 63.31 Orbay B, Goller G. High Temperature Material Processes, 2009, 28(4), 211.32 Habelitz S, Carl G, Rüssel C.Materials Science and Engineering A, 2001, 307 (1), 1.33 Tian Q B, Kong D Y, Dai J S,et al. Journal of Synthetic Crystals, 2014, 43(2), 409 (in Chinese).田清波, 孔德钰, 代金山, 等.人工晶体学报, 2014, 43(2), 409.34 Ma X P, Li G X, Shen L, et al.Journal of Xi'an Jiaotong University, 2003, 37(7), 726 (in Chinese).马新沛,李光新,沈莲,等.西安交通大学学报, 2003, 37(7), 726.35 Cheng K G, Wan J L, Liang K M.Chinese Journal of Material Research, 1997, 11(3), 309 (in Chinese).程慷果, 万菊林, 梁开明.材料研究学报, 1997, 11(3), 309.36 Cheng K G, Wan J L, Liang K M.Chinese Journal of Mechanical Engineering, 1998, 34(3), 60 (in Chinese). 程慷果, 万菊林, 梁开明.机械工程学报, 1998, 34(3), 60.37 Cheng K G, Wan J L, Liang K M.Journal of the Chinese Ceramic Society,1998, 26(3), 403(in Chinese).程慷果, 万菊林, 梁开明.硅酸盐学报, 1998, 26(3), 403. 38 H che T, Habelitz S, Khodos I.Journal of Crystal Growth, 1998, 192(1), 185.39 Uno T, Kasuga T, Nakayama S, et al.Journal of American Ceramic Society, 1993, 76(2), 539.40 Tzeng J M, Duh J G, Chung K H, et al. Journal of Materials Science, 1993, 28(22), 6127.41 Tian Q B, Wang Y, Yin Y S.Journal of the Chinese Ceramic Society, 2005, 33(2), 245.42 Qin X M, Sun X Y, Su L, et al.Acta Metallurgica Sinica, 2003, 39(2), 145(in Chinese).秦小梅, 孙祥云, 苏雷, 等.金属学报, 2003, 39(2), 145.43 Liang K M, Cheng K G, Duan R G, et al.Journal of Inorganic Materials, 1998, 13(3), 315(in Chinese). 梁开明, 程慷果, 段仁官,等. 无机材料学报, 1998, 13(3), 315. 44 Taruta S, Hayashi T, Kitajima K. Journal of the European Ceramic Society, 2004, 24(10-11), 3149.45 Taruta S, Shinkawa H, Sakai M, et al.Journal of the Ceramic Society of Japan, 2005, 113(2), 185.46 Suzuki S S, Taruta S, Takusagawa N.The Korean Journal of Ceramics, 1998, 4(4), 363.47 Taruta S, Fujisaw R, Kitajima K.Journal of the European Ceramic Society, 2006, 26(9), 1687.48 Alizadeh P, Eftekhari Yekta B, Javadi T. Journal of the European Cera-mic Society, 2008, 28(9), 1569.49 Zhang W Y, Gao H, Li B, et al. Scripta Materialia, 2006, 55(3), 275.50 Beall G H, Chyung K, Gadkaree K P. U.S. patent, US5132256, 1992.51 Lin G X, Lin Y W, Wu X Q, et al. Material Science Progress, 1991, 5(4), 358(in Chinese).林广新, 林永渭, 吴叙勤, 等.材料科学进展, 1991, 5(4), 358.52 Chyung K, Dawes S B. Materials Science and Engineering A, 1993, 162 (1-2), 27.53 Montazerian M, Alizadeh P, Eftekhari Yekta B.Journal of the European Ceramic Society, 2008, 28(14), 2687.54 Qin X M, Sun X Y, Xiu Z M, et al.Chinese Journal of Structural Chemistry, 2004, 23(10),1111.55 Yang H, Wu S, Hu J, et al.Materials and Design, 2011, 32(3), 1590.56 Wu S, He H M, Huang F, et al.Chinese Journal of Conservative Dentistry, 2009, 19(11), 650(in Chinese). 吴舜, 何惠明, 黄芳, 等.牙体牙髓牙周病学杂志, 2009, 19(11), 650.57 Zheng Z, Huang B Y, Tan Y N, et al.Journal of Central South University (Science and Technology), 2009, 40(3), 638(in Chinese). 郑治,黄伯云,谭彦妮,等.中南大学学报(自然科学版), 2009, 40(3), 638. 58 Montazerian M, Alizadeh P,Eftekhari Yekta B. Journal of the European Ceramic Society, 2008, 28 (14), 2693.59 Liu Y, Sheng X X, Dan X H, et al.Materials Science and Engineering C, 2006, 26(8), 1390.60 Jin H Y, Qiao G J, Gao J Q, et al.Bulletin of the Chinese Ceramic Society, 2005, 24(4), 66 (in Chinese)金海云, 乔冠军, 高积强, 等.硅酸盐通报, 2005, 24(4), 66.61 Ke Z B, Lu A X, Liu S J, et al.Bulletin of the Chinese Ceramic Society, 2006, 25(1), 49 (in Chinese).柯尊斌, 卢安贤, 刘树江, 等.硅酸盐通报, 2006, 25(1), 49.62 Zhang W Y, Gao H. Bulletin of the Chinese Ceramic Society, 2009,28(6),1203 (in Chinese).章为夷, 高宏.硅酸盐通报, 2009, 28(6), 1203. 63 Xiang Q J, Liu Y, Sheng X X.Materials Science and Engineering of Powder Metallurgy, 2006, 11(1), 7 (in Chinese).向其军,刘咏,盛小娴.粉末冶金材料与工程, 2006, 11(1), 7.64 Qiu L L, Liang K M.Journal of the Chinese Ceramic Society, 2014, 42(6), 693(in Chinese). 邱丽莉,梁开明.硅酸盐学报, 2014, 42(6), 693.65 Hamasaki T, Eguchi K, Koyanagi Y, et al.Journal of the American Ceramic Society, 1988, 71(12), 1120.66 Tohidifar M R, Alizadeh P.Materials Chemistry and Physics, 2016, 179, 160.67 Tohidifar M R, Alizadeh P, Riello P. Materials Research Bulletin, 2012, 47(6), 1374.68 Tohidifar M R, Alizadeh P, Aghaei A R.Materials Characterization, 2015, 99, 61.69 Tohidifar M R, Alizadeh P, Aghaei A R, et al. Ceramic International, 2012, 38(4), 2813.70 Saraswati V, Raoot S.Journal of Materials Science, 1992, 27(2), 429.71 Ghaffari M, Alizadeh P, Rahimipour M R.Journal of Non-Crystalline Solids, 2012, 358(23), 3304.72 Tian Q B, Kong D Y, Zhai T.Science and Engineering of Composites Materials, 2015, 23(5), 573.73 Si W, Xu H S, Sun M, et al. Advances in Materials Science and Enginee-ring, 2016, 650, 1.74 Li R K, Jiang X S, Zuo L P, et al.China Ceramics, 2014, 50(9), 74 (in Chinese). 李荣凯, 蒋晓曙, 左李萍, 等.中国陶瓷, 2014, 50(9), 74.75 Zhou S J, Jiang X S, Zuo L P, et al.China Ceramics, 2013, 49(3), 41 (in Chinese). 周世界,蒋晓曙,左李萍,等.中国陶瓷, 2013, 49(3), 41.76 Ashouri Rad B, Alizadeh P. Ceramics International, 2009, 35(7), 2775.77 Zhang W Y,Gao H.Journal of the Chinese Ceramic Society, 2007,35(2),225 (in Chinese).章为夷,高宏.硅酸盐学报, 2007,35(2), 225.78 Zhang W Y,Gao H.Journal of the Chinese Ceramic Society, 2007, 5(10), 1396 (in Chinese).章为夷, 高宏.硅酸盐学报, 2007,35(10), 1396.79 James P F.Journal of Non-Crystalline Solids, 1995, 181(1-2), 1.80 赵康, 汤玉斐, 徐雷, 等.中国专利, CN 201310360645.1, 2013.81 马冬阳, 边妙莲, 孙辉, 等.中国专利, CN 2017101078986, 2017. 82 Budd M I.Journal of Materials Science, 1993, 28, 1007.83 Yu L P, Wang P, Xiao H N, et al.Rare Metal Materials and Enginee-ring, 2008, 37(s1), 654 (in Chinese).余丽萍,汪萍,肖汉宁,等.稀有金属材料与工程, 2008, 37(s1), 654.84 Li B, Yuan Y, Zhang S, et al.Journal of Materials Science: Materials in Electronics, 2011, 22(8), 924. 85 Liu P, Chen X P.Journal of Inorganic Materials, 1999, 14(2), 275 (in Chinese).刘平, 陈显平.无机材料学报, 1999, 14(2), 275.86 Talyaganov D U, Agathopoulos S, Fernandes H R, et al.Journal of the European Ceramic Society, 2004, 24(13), 3521.87 Fmarques V M, Talyaganov D U, Agathopoulos S, et al.Journal of the European Ceramic Society, 2006, 26(13), 2503.