聚己二酸对苯二甲酸丁二酯(PBAT)共混改性聚乳酸(PLA)高性能全生物降解复合材料研究进展

doi:10.11896/cldb.18040044

Abstract
Figure/Table
References
Related Citation (3)

Download:

Full Text ( PDF ) (4166KB)
Export: BibTeX | EndNote (RIS)

Abstract As a biodegradable and renewable material, poly(lactic acid) (PLA) has attracted numerous attention for its excellent biocompatibility and mechanical performance (high strength and high modulus). PLA matrix biocomposites have been seriously blocked by its poor ductility, low impact strength, low crystallization rate and low crystallinity since it entered people’s eye shot. Continuous efforts have been put into the modification research of PLA in the past ten years,which primarily focus on plasticizing, strengthening and toughening. Specifically speaking, plasticizing modification is adding the small molecular compound like lactic acid oligomer, citrate and polyethylene glycol into PLA, for the sake of reducing the interaction between PLA chains, improving the plasticity of PLA, and increasing the elongation at break. Yet the plasticizers are likely to exude and migrate, which is a crucial problem now. Reinforcement modification, namely heterogeneous nucleation of PLA with inorganic fillers or nanoparticles like silica (SiO₂), titanium dioxide (TiO₂), calcium carbonate (CaCO₃), talcum powder (Talc), montmorillonite, which can improve the crystalline properties of PLA, but can not fundamentally enhance the brittleness of the material toughening modification refer to the addition of rubber particles or thermoplastic elastomer such as natural rubber (NR), thermoplastic polyurethane (TPU), polycarbonate (PC) into PLA. Although the toughness of the composite is improved to some extent, the biodegradability cannot be preserved. With the production of some degradable polyester including polycaprolactone (PCL), poly (butylene succinate) (PBS), poly (butylene adipate-co-terephthalate) (PBAT), PLA can be effectively toughened without sacrificing the degradation performance. It is the main direction and research hotspot of PLA modification. PBAT, a degradable polyester polymer, possesses the flexibility of aliphatic hydrocarbon and the rigidity of aromatic ring, which makes PBAT emerge as the best candidate for PLA toughening. In the early research of PLA/PBAT, it was found that the poor compatibility of PBAT and PLA resulted in unsatisfactory mechanical properties of the blends, which is primarily caused by the tremendous differences in the structure of molecular chain segment. In the last decade, on the basis of polymer blending modification, researchers have selected the appropriate third component to modify the PLA/PBAT blend system, and achieved fruitful results. Presently, the impact strength of the PLA/PBAT blend system after toughening has been raised from 2.3 kJ/m² to 61.9 kJ/m². This review offers a retrospection of the research efforts with respect to the progress of modification PLA/PBAT blends, and provides elaborate descriptions about physical blend (inorganic filler or nanoparticles and physical compatibility agent) and reactive blending compatibilizer modified PLA/PBAT blends. Finally, we focus on the problems faced by PLA/PBAT blending modification system, aiming at providing a reference for the preparation of high performance fully biodegradable PLA/PBAT composites.

Key words： poly(lactic acid) poly(butylene adipate-co-terephthalate) biodegradation reactive blend

Published: 21 May 2019

CLC number:

TB324

Fund:This work was financially supported by the National Natural Science Foundation of China (21174108,51273060).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Xin
	SHI Min
	YU Xiaolei
	PENG Shaoxian
	ZHAO Xipo

Cite this article:

WANG Xin,SHI Min,YU Xiaolei, et al. High Performance and Fully Biodegradable Poly (lactic acid) (PLA) Composites Modified by Poly (Butylene Adipate-co-terephthalate) (PBAT): a Review[J]. Materials Reports, 2019, 33(11): 1897-1909.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.18040044 OR http://www.mater-rep.com/EN/Y2019/V33/I11/1897

1 Kates L C, Fitzgerald R. Aesthetic Surgery Journal,2008,28(4),397.
2 Reddy M M, Vivekanandhan S, Misra M, et al. Progress in Polymer Science,2013,38(10),1653.
3 Garlotta D. Journal of Polymers & the Environment,2001,9(2),63.
4 Gandini A, Coelho D, Gomes M, et al. Journal of Materials Chemistry,2009,19(45),8656.
5 Gupta B, Revagade N, Hilborn J. Progress in Polymer Science,2007,32(4),455.
6 Bai H, Xiu H, Gao J, et al. ACS Applied Materials & Interfaces,2012,4(2),897.
7 Wang M, Wu Y, Li Y, et al. Polymer Reviews,2017,57(4),557.
8 Krishnan S, Pandey P, Mohanty S, et al. Polymer-Plastics Technology and Engineering,2016,55(15),1623.
9 Nagarajan V, Mohanty A K, Misra M. ACS Sustainable Chemistry & Engineering,2016,4(6),2899.
10 Zeng J, Li K, Du A. RSC Advances,2015,5(41),32546.
11 Zhou S, Huang H, Ji X, et al. ACS Applied Materials & Interfaces,2016,8(12),8096.
12 Palsikowski P A, Kuchnier C N, Pinheiro I F, et al. Journal of Polymers & the Environment,2018,26(1),330.
13 Jiang L, Wolcott M P, Zhang J. Biomacromolecules,2006,7(1),199.
14 Chaiwutthinan P, Chuayjuljit S, Srasomsub S, et al. Journal of Applied Polymer Science,2019,136(21),47543.
15 Li K, Peng J, Turng L, et al. Advances in Polymer Technology,2011,30(2),150.
16 Jiang Z, Wang Y, Fu L, et al. Macromolecules,2013,46(17),6981.
17 Sinha Ray S, Okamoto K, Okamoto M. Macromolecules,2003,36(7),2355.
18 Aframehr W M, Molki B, Heidarian P, et al. Fibers & Polymers,2017,18(11),2041.
19 Shi N, Dou Q. Polymer Composites,2014,35(8),1570.
20 Shi N, Dou Q. Journal of Thermal Analysis & Calorimetry,2015,119(1),635.
21 Pilla S, Kim S G, Auer G K, et al. Materials Science & Engineering C,2010,30(2),255.
22 Dil E J, Favis B D. Polymer,2015,76,295.
23 Dil E J, Virgilio N, Favis B D. European Polymer Journal,2016,85,635.
24 Georgiopoulos P, Kontou E, Niaounakis M. Polymer Composites,2014,35(6),1140.
25 Phetwarotai W, Tanrattanakul V, Phusunti N. Plastics Rubber & Compo-sites,2016,45(8),333.
26 Craciun A M, Focsan M, Magyari K, et al. Materials,2017,10(7),836.
27 Girdthep S, Worajittiphon P, Molloy R, et al. Polymer International,2015,64(2),203.
28 Girdthep S, Worajittiphon P, Leejarkpai T, et al. European Polymer Journal,2016,82,244.
29 Tiimob B J, Mwinyelle G, Abdela W. Journal of Agricultural & Food Chemistry,2017,65(9),1967.
30 Ma P, Jiang L, Yu M, et al. ACS Sustainable Chemistry & Engineering,2016,4(12),6417.
31 Sun Y H, Cai S, Ren J, et al. Journal of Polymer Science Part B Polymer Physics,2017,55(16),1197.
32 Jiang L, Liu B, Zhang J. Industrial & Engineering Chemistry Research,2009,48(16),7594.
33 Moustafa H, El K, Abou-Kandil A, et al. ACS Applied Materials & Interfaces,2017,9(23),20132.
34 Fernandes T M D, Leite M C A M, de Sousa A M F, et al. Polymer Bulletin,2017,74(5),1713.
35 Chen R, Abdelwahab M A, Misra M, et al. Journal of Polymers and the Environment,2014,22(4),439.
36 Ravati S, Beaulieu C, Zolali A M, et al. AIChE Journal,2014,60(8),3005.
37 Zolali A M, Favis B D. Journal of Physical Chemistry B,2016,120(49),12708.
38 Sun Z, Zhang B, Bian X, et al. RSC Advances.2015,5(90),73842.
39 Ding Y, Lu B, Wang P, et al. Polymer Degradation and Stability,2018,147,41.
40 Bao R, Jiang W, Liu Z, et al. RSC Advances,2015,5(44),34821.
41 Liu G C, He Y S, Zeng J B, et al. Polymer Chemistry,2014,5(7),2530.
42 Yao Z, Sun J, Wang Q, et al. Industrial & Engineering Chemistry Research,2011,51(2),751.
43 Teamsinsungvon A, Jarapanyacheep R, Ruksakulpiwat Y, et al. Polymer Science, Series A,2017,59(3),384.
44 Coltelli M, Toncelli C, Ciardelli F, et al. Polymer Degradation and Stability,2011,96(5),982.
45 Lin S, Guo W, Chen C, et al. Materials & Design,2012,36,604.
46 Wang B, Zhao X, Wang L. Polymer-Plastics Technology and Enginee-ring,2013,52(7),718.
47 Xu C, Cao L, Lin B, et al. ACS Applied Materials & Interfaces,2016,8(27),17728.
48 Bai J, Li H, Shi Z, et al. Macromolecules,2015,48(11),3539.
49 Zhao J, Chen M, Wang X, et al. ACS Applied Materials & Interfaces,2013,5(12),5550.
50 Nishida M, Ichihara H, Watanabe H, et al. International Journal of Impact Engineering,2015,79,117.
51 Signori F, Boggioni A, Righetti M C, et al. Macromolecular Materials and Engineering,2015,300(2),153.
52 Ma P, Cai X, Zhang Y, et al. Polymer Degradation and Stability,2014,102(102),145.
53 Jin Y, Men S, Weng Y. Journal of Polymer Engineering,2018,38(3),223.
54 Dong W, Zou B, Ma P, et al. Polymer International,2013,62(12),1783.
55 Gody G, Roberts D A, Maschmeyer T, et al. Journal of the American Chemical Society,2016,138(12),4061.
56 Pan H, Li Z, Yang J, et al. RSC Advances,2018,8(9),4610.
57 Tuna B, Ozkoc G. Journal of Polymers and the Environment,2017,25(4),983.
58 Schneider J, Manjure S, Narayan R. Journal of Applied Polymer Science,2016,133(16),43310.
59 Al-Itry R, Lamnawar K, European Polymer Journal,2014,58,90.
60 Al-Itry R, Lamnawar K, Maazouz A. Polymer Degradation and Stability,2012,97(10),1898.
61 Al-Itry R, Lamnawar K, Maazouz A. Rheological Acta,2014,53(7),501.
62 Al-Itry R, Lamnawar K, Maazouz A, et al. European Polymer Journal,2015,68(SI),288.
63 Meng Q Y, Weng Y X. China Plastics,2014,28(2),91(in Chinese).
孟庆阳,翁云宣.中国塑料,2014,28(2),91.
64 Zhang N, Zeng C, Wang L, et al. Journal of Polymers and the Environment,2013,21(1),286.
65 Yang W, Dominici F, Fortunati E, et al. RSC Advances,2015,5(41),32350.
66 Yuryev Y, Mohanty A K, Misra M. Macromolecular Materials and Engineering,2016,301(12),1443.
67 Luo Y, Ju Y, Bai H, et al. The Journal of Physical Chemistry B,2017,121(25),6271.
68 Zhang N, Wang Q, Ren J, et al. Journal of Materials Science,2009,44(1),250.
69 Wu N, Zhang H. Materials Letters,2017,192,17.
70 Abdelwahab M A, Taylor S, Misra M, et al. Macromolecular Materials and Engineering,2015,300(3),299.
71 Wang H, Fu Z, Zhao X, et al. ACS Applied Materials & Interfaces,2017,9(16),14358.
72 Phetwarotai W, Aht-Ong D. Journal of Thermal Analysis and Calorimetry,2016,126(3),1797.
73 Phetwarotai W, Tanrattanakul V, Phusunti N. Chinese Journal of Polymer Science,2016,34(9),1129.
74 Sun Y, Cai S, Ren J, et al. Journal of Polymer Science Part B Polymer Physics,2017,55(16),1197.
75 Freitas A L P D, Filho L R T, Calvão P S, et al. Polymer Testing,2017,62,189.
76 Kumar M, Mohanty S, Nayak S K, et al. Bioresource Technology,2010,101(21),8406.
77 Mohapatra A K, Mohanty S, Nayak S K. Journal of Polymers and the Environment,2014,22(3),398.
78 Zhou Y, Lei L, Yang B, et al. Polymer Testing,2017,60,78.