Abstract: The mechanical plating have gained great development in past three decades. Compared with the traditional electroplating, hot dip galvanizing, thermal spraying, it has many problems such as immature process principle, inaccurate process control, no diverse plated coatings, slow progress of application and promotion. In this regard, the current research status and application of mechanical plating are reviewed comprehensively, which include the definition, technological flow, characteristics of the coating, the equipment, adsorption and deposition of metal powder, the microstructure of coatings, the bonding mechanism, the densification of coating and the application of mechanical plating. The practical problems resulting from grafting of mechanical galvanizing to other metallic mechanically deposited coating or other powder molding technology are also pointed out. At the same time, the key scientific issues in mechanism of mechanical plating are put forward. Finally, the discussion in this paper is expected to promote the rapid development of mechanical plating.
王胜民, 赵晓军, 何明奕. 机械镀技术的现状及发展*[J]. 《材料导报》期刊社, 2017, 31(5): 117-122.
WANG Shengmin, ZHAO Xiaojun, HE Mingyi. Research Status and Development of Mechanical Plating. Materials Reports, 2017, 31(5): 117-122.
1 Narusch M J. Dry impact plating technology[J]. Metal Finish,1990,88(7):15.
2 He M Y, Wang S M, Liu L. Non-crystal metal-powder coating—Mchanical plating[J]. Heat Treatment Metals, 2006,31(2):16(in Chinese).
何明奕, 王胜民, 刘丽. 无结晶金属微粉形成镀层——机械镀[J]. 金属热处理, 2006,31(2):16.
3 Marjorie H S, Kim B G. Composition and process for mechanical plating of nickel-containing coatings on metal substrates: US, 5587006[P].1996-12-24.
4 Bartlett I, Long E, Rowan A, et al. Mechanical plating of zinc alloys: US, 2002/0182337(A1) [P].2002-12-05.
5 Wang S M, Liu L, Zhao X J, et al. Cleaner production of mechanical zinc-plating[J]. Techniques Equ Environ Pollut Control,2003,4(11):83 (in Chinese).
王胜民, 刘丽, 赵晓军, 等. 机械镀锌工艺的清洁生产[J]. 环境污染治理技术与设备,2003,4(11):83.
6 Gordon M Allison. Mechanical plating [J]. Metal Finish Guidebook,2001,99(1A):399.
7 全国金属与非金属覆盖层标准化技术委员会. JB/T 8928-1999 钢铁制件机械镀锌[S]. 北京: 机械工业部机械标准化研究所,1999.
8 全国金属与非金属覆盖层标准化技术委员会. GB/T 2610-2010 机械镀锌层 技术规范和试验方法[S]. 北京:中国标准出版社,2010.
9 ISO/TC 107(Metallic and other inorganic coatings committee). ISO 12683-2004 Mechanically deposited coatings of zinc-specification and test methods[S]. Geneva: International Organization for Standardization, 2004.
10 Coch L G, Satow A. Process for plating adherent co-deposit of aluminum, zinc, and tin onto metallic substrates, and apparatus: US, 4880132[P].1989-11-14.
11 Wang S M,Liu L,He M Y.Study on driving metal in mechanically zinc deposited process[J].Surf Technol,2003,32(4):37 (in Chinese).
王胜民, 刘丽, 何明奕. 机械镀锌过程中先导金属的研究[J]. 表面技术,2003,32(4):37.
12 Erismann D W. Process for mechanically depositing heavy metallic coatings: US, 4389431[P].1983-06-21.
13 Ostapenko G, Khramova Y. On mechanism of mechanical zinc plating on steel[C]∥207th Meeting of the Electrochemical Society.Quebec, Canada,2005.
14 Wang S M, He M Y, Zhao X J. Bonding mechanism of mechanically deposited coating[J]. Phys Procedia,2013,50:315.
15 Wang H, Gu G H. Surface free energy of solid matter and its hydrophilic hydrophobic nature[J]. Chem Online,2009,72(12):1091(in Chinese).
王晖, 顾帼华. 固体的表面能及其亲水/疏水性[J]. 化学通报,2009,72(12):1091.
16 Huang B, Wang H, Gu G H. ζ potential of air bubble[J]. Appl Chem Ind,2014,43(1):142 (in Chinese).
黄斌, 王晖, 顾帼华. 气泡的ζ电位[J]. 应用化工,2014,43(1):142.
17 Wang S M, Liu L, Zhao X J, et al. Structure analysis of mechanical deposited zinc coating[J]. Mater Prot,2003,36(10):24(in Chinese).
王胜民, 刘丽, 赵晓军, 等. 机械镀锌层的结构分析[J]. 材料保护,2003,36(10):24.
18 Sun Y, Shi Q N, Zhang S H, et al. The microstructure of composite bands formed by powder plating and rolling(PPR)[J]. J Mater Process Technol,1997,63(1-3):438.
19 Sridhar I, Fleck N A. Yield behavior of cold compacted composite powders[J]. Acta Mater,2000,48(13):3341.
20 Hamid Assadi, Frank Götner, et al. Bonding mechanism in cold gas spraying[J].Acta Mater,2003,51(15):4379.
21 Van Steenkiste T H, Smith J R, Teets R E. Aluminum coatings via kinetic spray with relatively large powder particles[J]. Surf Coat Technol,2002,154(2-3):237.
22 Wang S M, He M Y, Zhao X J, et al. Microstructures and key properties of mechanical-deposited Zn-Al coatings[J]. Chin J Mechan Eng,2009,22(4):608.
23 Wang S M, Zhao X J, He M Y, et al. Effects of particles shapes of zinc on the properties of mechanically deposited coating[J]. J Mater Eng,2009,318(11):84(in Chinese).
王胜民, 赵晓军, 何明奕, 等. 锌粉颗粒形状对机械镀锌层性能的影响[J]. 材料工程,2009,318(11):84.
24 王胜民, 赵晓军, 李继锋, 等. 一种机械镀铜及铜合金工艺: CN, 201510571018.1[P]. 2015-15-02.
25 Wang S M, He M Y, Zhao X J, et al. Adhesion of mechanically deposited zinc coating on steel[J].Trans Mater Heat Treat,2011,32(S1):130(in Chinese).
王胜民, 何明奕, 赵晓军, 等. 机械镀锌层的结合强度分析[J]. 材料热处理学报,2011,32(增刊):130
26 Wang J X, Li X J, Yan H H, et al. Research of energy deposition caused by micro-explosive welding in explosive consolidation of metal powders[J]. Rare Metal Mater Eng,2006,35(7):1039.
27 Zhang Y K, Kong D J, Feng A X, et al. Study on the determination of interfacial binding strength of coatings(Ⅰ):Teorctical analysis of stress in thin film binding interface[J]. Acta Phys Sin,2006,55(6):2897(in Chinese).
张永康, 孔德军, 冯爱新, 等. 涂层界面结合强度检测研究(Ⅰ): 涂层结合界面应力的理论分析[J]. 物理学报,2006,55(6):2897.
28 Zhou M, Zhang Y K, Cai L. New method of laser scratching to determine the bond strength of the film-substrate interface[J]. Sci China:Series E,2002,32(1): 28 (in Chinese).
周明, 张永康, 蔡兰. 激光层裂法定量测定薄膜界面结合强度[J]. 中国科学:E辑, 2002, 32(1): 28.
29 Chis M C, Cojocaru M O. Adhesion prediction on metal thermal spray coatings[J]. Surf Eng,2005,21(1):72.
30 Lesage J,et al.Role of residual stresses on interface toughness of thermally sprayed coatings[J].Thin Solid Films,2002,415(1-2):143.
31 Ye M, Delplancke J L, Berton G, et al. Characterization and adhesion strength study of Zn coatings electrodeposited on steel substrates[J]. Surf Coat Technol,1998,105(1-2):184.
32 柯尔巴什尼可夫,叶弗烈莫夫.颗粒材料[M]. 周光垓,等,译.北京:国防工业出版社,1986.
33 Li Y T, Du Z Y, Tao Y Y. Interfacial bonding state on different metals Ag, Ni in cold pressure welding[J]. Trans Nonferrous Met Soc China,2003,13(2):276.
34 Li Y T, Du Z Y, Ma C Y. Bond area of two welded metals is actually interfacial phenomenon in cold pressure welding[J]. J Tianjin University,2002,35(4):516(in Chinese).
李云涛, 杜则裕,马成勇. 金属冷压焊界面结合机理探讨[J]. 天津大学学报,2002,35(4):516.
35 Du Y C, Wang S L. Energy dissipation in collision of two balls covered by fine particles[J]. Int J Impact Eng,2010, 37(3):309.
36 Sollie Weh, Bokhove O, Van Der Vegt Jjw. Space-time disconti-nuous Galerkin finite element method for two-fluid flows[J]. J Comput Phys,2011,230(3):789.
37 Cummins S J, Cleary P W. Using distributed contacts in DFM[J]. Appl Mathematical Model,2011,35(4):1904.
38 Qi H B,et al.Researches on mixing of granular materials with discrete element method[J].Prog Chem,2015,27(1):113 (in Chinese).
戚华彪, 周光正, 于福海, 等. 颗粒物质混合行为的离散单元法研究[J]. 化学进展,2015,27(1):113.
39 Liu Y, Li Y M, Xia Q K, et al. Experimental study on discrete element simulation of powder injection molding[J]. J Mater Eng,2014(4):85(in Chinese).
刘煜, 李益民, 夏卿坤, 等. 粉末注射成形的离散元模拟实验研究[J]. 材料工程,2014(4):85.
40 Zheng Z S, Qu X H, Xu Q W, et al. Three dimensional numerical simulation of two-phase flow for powder injection molding and separation of powder and binder[J]. Chin J Nonferrous Metals,2014,24(1):122 (in Chinese).
郑洲顺, 曲选辉, 徐勤武, 等. 粉末注射成形两相流动三维数值模拟及粉末与粘结剂的分离[J].中国有色金属学报,2014,24(1):122.
41 Seung Whee Rhee, Hyo Hyun Choi, Hun Su Park. Characteristics of mercury emission from linear type of spent fluorescent lamp[J]. Waste Manage,2014,34(6):1066.
42 Jiin-Huey Chern Lin, Fred Ying-Yi Chen, Hui-Ju Chiang, et al. Effect of ball milling on structures and properties of dispersed-type dental amalgam[J]. Dental Mater,2011, 27(4):65.
43 Mirza Shahzad Baig, et al. Conventional glass-ionomer materials: A review of the developments in glass powder, polyacid liquid and the strategies of reinforcement[J]. J Dentistry,2015,43(8):897.
44 American society for testing and materials. ASTM B 635-00(2015) Standard specification for coatings of cadmium mechanically deposited[S]. West Conshohocken, PA: ASTM International,2015.
45 American society for testing and materials. ASTM B 635-00(2015) Standard specification for coatings of cadmium tin mechanically deposited[S]. West Conshohocken, PA: ASTM International,2015.
46 American society for testing and materials. ASTM B 816-00(2015) Standard specification for coatings of cadmium zinc mechanically deposited[S]. West Conshohocken, PA: ASTM International,2015.
47 AMS B finishes processes and fluids committee. AMSC81562-2011 Coatings, admium, tin-cadmium and zinc (mechanically deposited)[S]. Chicago: SAE International, 2011.
渝公网安备50019002502923号 版权所有：《材料导报》编辑部
2017, Vol. 31 
