固溶处理温度对GH3625合金热挤压管材微观组织和力学性能的影响

doi:10.11896/j.issn.1005-023X.2018.08.020

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (5225KB)
Export: BibTeX | EndNote (RIS)

Abstract The influence of solution temperature on microstructure and mechanical properties of GH3625 alloy hot extruded tube were investigated by SEM, EDS, XRD, etc. The results indicated that 1 120 ℃ was a turning point in the microstructure and mechanical properties of alloys. When the solution treatment temperature was between 910 ℃ and 1 120 ℃, the grain hardness increased and the strength decreased slowly because of the pinning of NbC phase at grain boundary. When the solution temperature exceeded 1 120 ℃, the NbC phase was dissolved in a large amount, the pinning effect was weakened, the grain size increased rapidly, the hardness and strength of the alloy decreased obviously. With the increasing temperature, the dimples in alloy fractwre became large and deep and the plasticity gradually increased. When the temperature exceeded 1 120 ℃, there were mainly dimples in tensile fracture. In conclusion, the optimum solution treatment temperature of GH3625 alloy hot extrusion tube is 1 120 ℃.

Key words： GH3625 alloy solution treatment microstructure mechanical properties

Published: 25 April 2018 Online: 2018-05-11

CLC number:

TG142.71

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	DING Yutian
	MA Yuanjun
	DOU Zhengyi
	LIU Jianjun
	GAO Yubi
	MENG Bin

Cite this article:

DING Yutian,MA Yuanjun,DOU Zhengyi, et al. Effect of Solution Treatment Temperature on Microstructure and Mechanical Properties of GH3625 Alloy Hot Extruded Tube[J]. Materials Reports, 2018, 32(8): 1311-1317.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.08.020 OR https://www.mater-rep.com/EN/Y2018/V32/I8/1311

1 冶军.美国镍基高温合金[M].北京:科学出版社,1978.
2 Zhong Z W, Peng Z F. Fractal roughness structures of precision-machined WC-Co- and Inconel 625-coated steel rods[J].The International Journal of Advanced Manufacturing Technology,2007,33(9):885.
3 郭建亭.高温合金材料学[M].北京:科学出版社,2008.
4 张红斌.国外Inconel 625合金的进展[J].特钢技术,2000(3):69.
5 Thivillon L, Bertrand P H, Laget B, et al. Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components[J].Journal of Nuclear Materials,2009,385(2):236.
6 Lu Yaohui, Xu Fujia, Liu Yuxin, et al. Effect of solution temperature on the microstructure of Inconel 625 alloy fabricated by PAW rapid prototyping[J].Materials Science & Technology,2013,21(2):14(in Chinese).
吕耀辉,徐富家,刘玉欣,等.固溶温度对等离子快速成形Inconel625合金组织的影响[J].材料科学与工艺,2013,21(2):14.
7 Zhang Q, Wang J W, et al. Effects of solution treatment on microstructure and tensile properties of hot isostatic pressed Inconel 625 alloy[J]. Heat Treatment of Metals,2013,38(3):65(in Chinese).
张谦,王基维,等.固溶处理对热等静压Inconel 625合金组织与拉伸性能的影响[J].金属热处理,2013,38(3):65.
8 Wei P, Li J R, Zhong Z G. Study on the surface recrystallization of a nickel-base single crystal superalloy[J].Journal of Materials Engineering,2001(10):5(in Chinese).
卫平,李嘉荣,钟振纲.一种镍基单晶高温合金的表面再结晶研究[J].材料工程,2001(10):5.
9 Cox D C, Roebuck B, Rae C M F, et al. Recrystallisation of single crystal superalloy CMSX-4[J].Materials Science and Technology,2003,19(4):440.
10 Li Y N, He D, Li S S, et al. Surface recrystallization in a Ni₃Al based single crystal alloy IC6sx[J].Acta Metallurgica Sinica,2008,44(4):391(in Chinese).
李亚楠,何迪,李树索,等.Ni₃Al基单晶合金IC6sx的表面再结晶[J].金属学报,2008,44(4):391.
11 Wang Z G, Zhao J C, Yan P, et al. Recrystallization of nickel base single crystal superalloy[J].Journal of Iron & Steel Research,2009,21(2):23.
12 Li J R, Sun F L, Xiong J C, et al. Effects of surface recrystallization on the microstructures and creep properties of single crystal superalloy DD6[J].Materials Science Forum,2010,638-642(9):2279.
13 Bian Fang, Su Guoyue, et al. Effect of solution parameters on grain growth of cold deformed Inconel 718 alloy[J].Rare Metal Materials and Engineering,2005,34(8):1338(in Chinese).
边舫,苏国跃,等.固溶参数对冷变形Inconel718合金晶粒长大的影响[J].稀有金属材料与工程,2005,34(8):1338.
14 Xiong Jichun, Li Jiarong, et al. Characteristic and formation mechanism of precipitates at recrystallization grain boundaries of single crystal superalloy DD6[J].Acta Metallurgica Sinica,2009,45(10):1232(in Chinese).
熊继春,李嘉荣,等.单晶高温合金DD6再结晶晶界析出相特征及其形成机制[J].金属学报,2009,45(10):1232.
15 Liu Yongchang, Guo Qianying, Li Chong, et al. Recent progress on evolution of precipitates in Inconel 718 superalloy[J].Acta Metallurgica Sinica,2016,52(10):1259(in Chinese).
刘永长,郭倩颖,李冲,等.Inconel718高温合金中析出相演变研究进展[J].金属学报,2016,52(10):1259.
16 Li Qiang, Zhou Bangxin. A study of microstructure of alloy 690[J].Acta Metallurgica Sinica,2001(1):8(in Chinese).
李强,周邦新.690合金的显微组织研究[J].金属学报,2001(1):8.
17 Guo Jing, Geng Zhiyu, Dong Jianxin, et al. Microstructure and thermodynamic calculation of nickel based corrosion resistant 825 alloy[J].Rare Metal Materials and Engineering,2012,41(11):1929(in Chinese).
郭婧,耿志宇,董建新,等.镍基耐蚀825合金的组织特征及热力学计算[J].稀有金属材料与工程,2012,41(11):1929.
18 Xia Pengcheng, Yu Jinjiang, Sun Xiaofeng, et al. Effect of heat treatment on DZ951 γ′ phase of directionally nickel base superalloy[J].Rare Metal Materials and Engineering,2006,35(5):779(in Chinese).
夏鹏成,于金江,孙晓峰,等.热处理对定向镍基高温合金DZ951γ′相的影响[J].稀有金属材料与工程,2006,35(5):779.
19 Li Yang, Li Sha, et al. Effect of solution treatment on structure and mechanical properties of nickel base alloy GH4700[J].Special Steel,2013,34(3):64(in Chinese).
李阳,李莎,等.固溶处理对GH4700镍基合金管组织及力学性能的影响[J].特殊钢,2013,34(3):64.
20 高玉光, 刘靖. 固溶处理对825镍基合金管组织和力学性能的影响[C]∥2015连铸装备的技术创新和精细化生产技术交流会.西安,2015:342.
21 Guo Qingmiao, Li Haitao, Li Defu, et al. Hot extrusion moulding process and microstructure evolution of GH625 superalloy tubes[J].Chinese Journal of Rare Metals,2011,35(5):684(in Chinese).
郭青苗,李海涛,李德富,等.GH625合金管材热挤压成形工艺及组织演变的研究[J].稀有金属,2011,35(5):684.
22 Wu Zhigang, Li Defu, et al. Effect of deformation conditions on dynamic recrystallization of GH625 nickel-base alloy[J].Chinese Journal of Rare Metals,2010,34(6):833(in Chinese).
吾志岗,李德富,等.变形条件对GH625合金高温变形动态再结晶的影响[J].稀有金属,2010,34(6):833.
23 Fang Xudong, Han Depei, Li Yang. Effect of heat treatment on microstructure and mechanical properties of GH625 alloy hot extruded pipe[J].Hot Working Technology,2013,42(8):201(in Chinese).
方旭东,韩德培,李阳.热处理对GH625热挤压管材组织和力学性能的影响[J].热加工工艺,2013,42(8):201.
24 Floreen S, Fuchs G E, Yang W J. The metalurgy of alloy 625[M]∥Superalloys 718, 625, 706 and various derivatives. Warrendale,1994:13.
25 Wang X L, Wei Y H, Wang W, et al. Calculation of second phase particle-grain boundary interaction range[J].Acta Metallurgica Sinica,2008,21(1):8.
26 Zurob H S, Brechet Y, Purdy G. A model for the competition of precipitation and recrystallization in deformed austenite[J].Acta Mate-rialia,2001,49(20):4183.
27 Zhang Z H, Liu Y N, Liang X K, et al. The effect of Nb on recrystallization behavior of a Nb micro-alloyed steel[J].Materials Science & Engineering A,2008,474(1):254.
28 Xiong Yi, Zhang Lingfeng, et al. Influenceof heat treatment on microstructureof GH4199 alloy[J].Transactions of Materials and Heat Treatment,2010,31(2):35(in Chinese).
熊毅,张凌峰,等.热处理对GH4199合金组织的影响材[J].材料热处理学报,2010,31(2):35.
29 Feng Han, Song Zhigang, et al. Effect of solution treatment on microstructure and mechanical property of Inconel 690[J].Journal of Iron and Steel Research,2009,21(3):46(in Chinese).
丰涵,宋志刚,等.固溶处理对Inconel 690合金组织和力学性能的影响[J].钢铁研究学报,2009,21(3):46.
30 Li X, Zhang J, Rong L, et al. Effect of twins on the moderate temperature tensile deformation of a γ′ strengthened Fe-based superalloy[J].Journal of Alloys & Compounds,2009,467(1):383.