气垫式预时效工艺对6016铝合金汽车板性能的影响

doi:10.11896/j.issn.1005-023X.2018.08.018

Abstract
Figure/Table
References
Related Citation (6)

Download:

Full Text ( PDF ) (1279KB)
Export: BibTeX | EndNote (RIS)

Abstract Effect of pre-aging process in air-cushion furnace under different standing time after solid solution treatment on the formability, bake-hardening ability and precipitation characteristics of 6016 aluminum alloy automobile sheet was investigated by means of tensile test, hardness test, cupping test and differential scanning calorimetry in this study. The results indicated that pre-aging process in air-cushion furnace restrain the adverse effect of natural aging. The shorter standing time after solid solution treatment contributed to the effect of pre-aging process in air-cushion furnace on improving the formability and bake-hardening ability of 6016 aluminum alloy automobile sheet. When the standing time after solid solution treatment was 5 min and the pre-aging condition was 160 ℃×10 min, the formability and bake-hardening ability of 6016 aluminum alloy automobile sheet were both excellent. At the same time, more enhanced phase precipitated during the baking process.

Key words： 6016 aluminum alloy standing time pre-aging in air-cushion furnace formability bake-hardening ability

Published: 25 April 2018 Online: 2018-05-11

CLC number:

TG166.3

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	AN Xiaoxue
	LI Yong
	WANG Fu
	WANG Zhaodong
	DI Hongshuang

Cite this article:

AN Xiaoxue,LI Yong,WANG Fu, et al. Effect of Pre-aging Process in Air-cushion Furnace on the Performance of 6016 Aluminum Alloy Automobile Sheet[J]. Materials Reports, 2018, 32(8): 1300-1305.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.08.018 OR https://www.mater-rep.com/EN/Y2018/V32/I8/1300

1 Ren Y L, Xu Y P, Zhu Y T, et al. Effects of pre-aging on bake hardening ability and natural aging stability of aluminum alloy 6016[J].Hot Working Technology,2016,45(20):225(in Chinese).
任月路,徐燕萍,朱玉涛,等.预时效对6016汽车板烘烤硬化性及自然时效稳定性的影响[J].热加工工艺,2016,45(20):225.
2 Cui L, Guo M X, Peng X Y,et al. Influence of pre-deformation on the precip-itation behaviors of Al-Mg-Si-Cu alloy forautomotive application[J].Acta Metallurgica Sinica,2015,51(3):289(in Chinese).
崔莉,郭明星,彭祥阳,等.预变形对汽车用Al-Mg-Si-Cu合金析出行为的影响[J].金属学报,2015,51(3):289.
3 Li H, Mao Q Z, Wang Z X, et al. Effect of the thermo-mechanical treatment of pre-aging, cold-rolling and re-aging on microstructures and mechanical properties of 6061 Al alloy[J].Acta Metallurgica Sinica,2014,50(10):1244(in Chinese).
李海,毛庆忠,王芝秀,等.预时效+冷轧变形+再时效对6061铝合金微观组织和力学性能的影响[J].金属学报,2014,50(10):1244.
4 Liu X X, Tang J G, Zhang X M, et al. Influence of interrupted quenching on paint-bake response of AA6016 Al alloy sheet [J].The Chinese Journal of Nonferrous Metals,2014,24(5):1186(in Chinese).
刘星兴,唐建国,张新明,等.双级淬火对车身版用6016铝合金烤漆硬化效应的影响[J].中国有色金属学报,2014,24(5):1186.
5 Zhen L, Kang S B. The effect of presaging on microstructure and tensile properties of Al-Mg-Si alloys [J].Scripta Materialia,1997,36(10):1089.
6 Zeng Y, Yin Z M. Present research and developing trends of ultra high strength aluminum alloys[J].Journal of Central South University of Technology(Natural Science),2002,33(6):592(in Chinese).
曾渝,尹志民.超高强铝合金的研究现状及发展趋势[J].中南工业大学学报(自然科学版),2002,33(6):592.
7 Mori K, Maki S, Ishiguro M. Improvement of product strength and formability in stamping of Al-Mg-Si alloy sheetshaving bake harde-nability by resistance heat and artificial aging treatments[J].International Journal of Machine Tools and Manufacture,2006,46(15):1966.
8 Wang Z J, Li Y, Liu J G, et al. Evaluation of forming limit in viscous pressure forming of automotive aluminum alloy 6k21-T4 sheet[J].Transactions of Nonferrous Metals Society of China,2007,17(6):1169.
9 Birol Y, Karlik M. The interaction of natural aging with straining in a twin-roll cast Al-Mg-Si automotive sheet[J].Scripta Materialia,2006,55(7):625.
10 Jia Z H, Ding L P, Wu S N, et al. Research progress on microstructure and heat treatment of 6000 series aluminum alloys sheet for automotive body[J].Journal of Materials Engineering,2014(12):104(in Chinese).
贾志宏,丁立鹏,吴赛楠,等.汽车车身用6000系铝合金板材微观组织与热处理工艺的研究进展[J].材料工程,2014(12):104.
11 Deng K. Study of manufacturing process and development of aluminum alloy ABS[J].Nonferrous Metals Processing,2016,45(4):7(in Chinese).
邓可.铝合金车身板生产工艺技术及发展浅析[J].有色金属加工,2016,45(4):7.
12 Xu H H. The effect of pre-straining and pre-ageing on natural aging and bake-hardening response of an Al-Mg-Si-Cu alloy[D].Chongqing:Chongqing University,2013(in Chinese).
徐欢欢.预应变及预时效对Al-Mg-Si-Cu合金自然时效及烘烤硬化性能的影响[D].重庆:重庆大学,2013.
13 Zhao X F. Study on solution and pre-aging treatment of 6xxx series aluminum alloy sheets for automotive body[D].Shenyang:Nor-theastern University,2009(in Chinese).
赵幸锋.汽车车身用系铝合金板材固溶及预时效的研究[D].沈阳:东北大学,2009.
14 Xu F, Wang J L, Zhang Z P, et al. Effects of pre-strain and pre-aging treatments on microstructure and properties of 6101 aluminum alloy used for electrical conductor[J].Nonferrous Metals Science and Engineering,2016,7(1):34(in Chinese).
徐芬,王晶莉,张宗鹏,等.预应变与预时效对6101导电铝合金组织与性能的影响[J].有色金属科学与工程,2016,7(1):34.
15 Wang M. Mechanism on effect of pre-aging on the baking hardening properties of 6xxx series aluminum alloy for auto body sheet[D].Shenyang:Northeastern University,2014(in Chinese).
王敏.预时效对6xxx系铝合金汽车车身板材烤漆硬化性能影响的机理[D].沈阳:东北大学,2014.