超临界二氧化碳技术制备的聚丙烯/三元乙丙橡胶开孔发泡材料的吸油行为

doi:10.11896/j.issn.1005-023X.2018.08.006

Abstract
Figure/Table
References
Related Citation (0)

Download:

Full Text ( PDF ) (2694KB)
Export: BibTeX | EndNote (RIS)

Abstract Open-cell polymer foams with different cell sizes and foaming ratios were prepared from 70% polypropylene (PP) and 30% ethylene-propylene-diene monomer (EPDM) rubber blends by supercritical CO₂foaming technology, and their oil-absorbing performance were investigated. The results of the water contact angles experiment showed that they have outstanding hydrophobic and lipophilic property. Oil-absorbing and compression tests appealed that they have excellent repeated oil-absorbing performance, both of compression strength and permanent strain were declined with the increasing foaming ratio. And oil absorption kinetics study found that unit mass of oil absorption increased as the rising foaming ratio, and oil absorption kinetics conform to the secondary adsorption theoretical model.

Key words： polypropylene(PP) ethylene-propylene-diene monomer (EPDM) rubber CO₂ foaming open-cell polymer oil-absorbing

Published: 25 April 2018 Online: 2018-05-11

CLC number:

TQ328.1

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Ming
	LI Xing

Cite this article:

WANG Ming,LI Xing. Oil-absorbing Behavior of PP/EPDM Rubber Blend Open-cell Foams Prepared Using Supercritical CO₂ Technique[J]. Materials Reports, 2018, 32(8): 1236-1240.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.08.006 OR https://www.mater-rep.com/EN/Y2018/V32/I8/1236

1 Song Y, Wei Y, Qian H, et al. Analysis of the ground water and soil pollution by oil leakage[J].Procedia Environmental Sciences,2011,11(1):939.
2 Wang H. A comparative study on the emergency treatment mechanism for off shore oil spills of US and China: On the cases of the oil spills accidence of Mexico gulf and Dalian gulf[J].Journal of CPUL,2011(3):84(in Chinese).
王慧.中美海上石油泄漏应急机制的比较研究──以墨西哥湾石油泄漏事件和大连湾石油泄漏事件为例[J].中国政法大学学报,2011(3):84.
3 Wu D, Fang L, Qin Y, et al. Oil sorbents with high sorption capacity, oil/water selectivity and reusability for oil spill cleanup[J].Marine Pollution Bulletin,2014,84(1-2):263.
4 Duong H T T, Burford R P. Effect of foam density, oil viscosity, and temperature on oil sorption behavior of polyurethane[J].Journal of Applied Polymer Science,2006,99(1):360.
5 Gelderren L V, Brogaard N L, Srensen M X, et al. Importance of the slick thickness for effective in-situ burning of crude oil[J].Fire Safety Journal,2015,78:1.
6 Koshlaf E, Shahsavari E, Aburto-Medina A, et al. Bioremediation potential of diesel-contaminated Libyan soil[J].Ecotoxicology & Environment Safety,2016,133:297.
7 Radetic M, Ilic V, Radojevic D, et al. Efficiency of recycled wool-based nonwoven material for the removal of oils from water[J].Chemosphere,2008,70(3):525.
8 Zhu Z, Rosendahl L, Toor S S, et al. Hydrothermal liquefaction of barley straw to bio-crude oil: Effects of reaction temperature and aqueous phase recirculation[J].Applied Energy,2015,137(1):183.
9 Annunciado T R, Sydenstricker T H, Amico S C. Experimental investigation of various vegetable fibers as sorbent materials for oil spills[J].Marine Pollution Bulletin,2005,50(11):1340.
10 Adebajo M O, Frost R L, Kloprogge J T, et al. Porous materials for oil spill cleanup: A review of synthesis and absorbing properties[J].Journal of Porous Materials,2003,10(3):159.
11 Chin S F, Romainor A N B, Pang S C. Fabrication of hydrophobic and magnetic cellulose aerogel with high oil absorption capacity[J].Materials Letters,2014,115(2):241.
12 Sun H, Xu Z, Gao C. Multifunctional, ultra-flyweight, synergistically assembled carbon aerogels[J].Advanced Materials,2013,25(18):2554.
13 Wu C, Huang X, Wu X, et al. Mechanically flexible and multifunctional polymer-based graphene foams for elastic conductors and oil-water separators[J].Advanced Materials,2013,25(39):5658.
14 Kong W L, Bao J B, Wang J, et al. Preparation of open-cell polymer foams by CO2 assisted foaming of polymer blends[J].Polymer,2016,90:331.
15 Fang Y W, Bao J B, Yan H K, et al. Preparation of open-cell foams from polymer blends by supercritical CO₂ and their efficient oil-absorbing performance[J].Aiche Journal,2016,62(12):4182.
16 Wang C, Ying S. Batch foaming of short carbon fiber reinforced polypropylene composites[J].Fiber & Polymers,2013,14(5):815.
17 Rizvi A, Chu R K, Lee J H, et al. Superhydrophobic and oleophilic open-cell foams from fibrillar blends of polypropylene and polytetrafluoroethylene[J].ACS Applied Materials & Interfaces,2014,6(23):21131.