高性能可拆除灌浆料材料性能及灌浆套筒接头单向拉伸连接性能研究

doi:10.11896/cldb.25040193

Abstract
Figure/Table
References
Related Citation (7)

Download:

Full Text ( PDF ) (26247KB)
Export: BibTeX | EndNote (RIS)

Abstract To address the challenge of repairing defects in grouted sleeve connections, a novel high-performance demolishable grout (HPDG) was proposed, and its material properties and its influence on the uniaxial tensile joint performance of grouted sleeve joints were investigated. The material properties of HPDG incorporating varying concentrations of phase change materials (i.e., polymethyl methacrylate, PMMA) were conducted, and uniaxial tensile tests on HPDG-filled grouted sleeve joints were performed under both ambient (20 ℃) and elevated (200 ℃) temperature conditions. The experimental findings demonstrated that: (i) all performance parameters of HPDG under 20 ℃ were found to comply with current regulatory standards. At 200 ℃, the phase transition of PMMA was observed to induce a porous concrete-like microstructure in HPDG, accompanied by a significant reduction in compressive strength, thereby facilitating demolition. (ii) The uniaxial tensile performance of HPDG-filled grouted sleeve joints was validated to satisfy specification requirements at 20 ℃. Under 200 ℃, failure was characterized by rebar bon-ding slippage, with the pull-out force diminishing proportionally to the compressive strength degradation of HPDG. Critically, the residual pull-out force remained below the yield load of the embedded steel reinforcement, enabling sleeve disassembly within the elastic stress range of the rebar. (iii) Through a comprehensive evaluation of strength and demolishability, the HPDG formulation containing 35% PMMA was identified as the optimal parameter configuration.

Key words： grouted sleeve defect repair high performance demolishable grout (HPDG) material property uniaxial tensile test connection performance

Published: 10 March 2026 Online: 2026-03-10

CLC number:

TU375

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHEN Ju
	ZHANG Ruiqiang
	SONG Shasha

Cite this article:

CHEN Ju,ZHANG Ruiqiang,SONG Shasha. Study on High Performance Demolishable Grout: Material Properties and Uniaxial Tensile Behavior of Grouted Sleeve Joints[J]. Materials Reports, 2026, 40(5): 25040193-6.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.25040193 OR https://www.mater-rep.com/EN/Y2026/V40/I5/25040193

1 Wu M, Liu X, Liu H T, et al. Engineering Structures, 2020, 208, 110338.
2 Li J B, Fan Q Q, Lu Z, et al. Structural Design of Tall and Special Buildings, 2019, 28(13), e1632.
3 Hua L J, Rahman A B A, Mirasa A K, et al. Malaysian Journal of Civil Engineering, 2008, 20(1), 89.
4 Xu F, Wang K, Wang S G, et al. Construction and Building Materials, 2018, 185, 264.
5 Qu X S, Xie Y N, Sun Y B, et al. Structures, 2023, 48, 1128.
6 Mao S Y, Sun B, Ouyang Z P. Materials Reports, 2021, 35(4), 4105 (in Chinese).
毛诗洋, 孙彬, 欧阳志鹏, 等. 材料导报, 2021, 35(4), 4105.
7 Kuang Z P, Zheng G Y, Jiao X T. Journal of Tongji University(Natural Science), 2019, 47(7), 934 (in Chinese).
匡志平, 郑冠雨, 焦雪涛. 同济大学学报(自然科学版), 2019, 47(7), 934.
8 Yang Y, Ling H J, Liu J T, et al. Materials Reports, 2023, 37(2), 88(in Chinese).
杨杨, 凌宏杰, 刘金涛, 等. 材料导报, 2023, 37(2), 88.
9 Li X M, Gao R D, Xu Q F, et al. Building Structure, 2019, 49(24), 93 (in Chinese).
李向民, 高润东, 许清风, 等. 建筑结构, 2019, 49(24), 93.
10 Zheng G Y, Kuang Z P, Xiao J Z, et al. Construction and Building Materials, 2020, 233, 117233.
11 Chen X, Miao Q S, Yang C T, et al. Engineering Mechanics, 2020, 37(9), 199 (in Chinese).
陈曦, 苗启松, 杨参天, 等. 工程力学, 2020, 37(9), 199.
12 Wang Z Y, Wang Y Q, Du X X, et al. In: Conference Record of the 15th National Symposium on Modern Structural Engineering. Kaifeng, China, 2015, pp. 1781 (in Chinese).
王综轶, 王元清, 杜新喜, 等. 第十五届全国现代结构工程学术研讨会论文集. 开封, 2015, pp. 1781.
13 Munaro M R, Tavares S F. Construction Innovation-England, 2025, 25(2), 665.
14 Ministry of Housing and Urban-Rural Development of the People's Republic of China. The grouting sleeve for rebar splicing: JG/T 398-2019, China Architecture & Building Press, China, 2019 (in Chinese).
中华人民共和国住房和城乡建设部. 钢筋连接用灌浆套筒: JG/T 398-2019, 中国建筑工业出版社, 2019.
15 Ministry of Housing and Urban-Rural Development of the People's Republic of China. Cementitious grout for sleeve of rebar splicing: JG/T 408-2019, China Architecture & Building Press, China, 2019 (in Chinese).
中华人民共和国住房和城乡建设部. 钢筋连接用套筒灌浆: JG/T 408-2019, 中国建筑工业出版社, 2019.
16 ASTM C109/C109M-23, Standard test method of compressive strength of hydraulic cement mortars (using 2-in. or[50 mm] cube specimens), Annual Book of ASTM Standard, 2023, 4(01), 1.
17 Ministry of Housing and Urban-Rural Development of the People's Republic of China. Technical specification for grout sleeve splicing of rebar: JGJ 335-2015, China Architecture & Building Press, China, 2015 (in Chinese).
中华人民共和国住房和城乡建设部. 钢筋套筒灌浆连接应用技术规程: JGJ 335-2015, 中国建筑工业出版社, 2015.
18 Li S T, Chen X D, Zhang J H, et al. Journal of Building Materials, 2021, 24(6), 1146 (in Chinese).
李升涛, 陈徐东, 张锦华, 等. 建筑材料学报, 2021, 24(6), 1146.
19 Huang Y, Hu X, Shi C J, et al. Materials Reports, 2023, 37(1), 106 (in Chinese).
黄燕, 胡翔, 史才军, 等. 材料导报, 2023, 37(1), 106.
20 Hosseini S J A, Rahman A B A. Engineering Structures, 2016, 112, 1.