| INORGANIC MATERIALS AND CERAMIC MATRIX COMPOSITES |
|
|
|
|
|
| Pore Structure and Performance Modulation of Polypropylene Lithium-ion Battery Diaphragm Based on Dry Bi-directional Stretching |
| ZHANG Jiaheng1,2, ZHANG Long1,*, SONG Sainan2, LI Guangquan2,*
|
1 School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China 2 PetroChina Company Limited Lanzhou Chemical Research Center, Lanzhou 730060, China |
|
|
|
|
Abstract Safety and electrochemical efficiency are dependent on the performance of lithium-ion battery diaphragms. Dry bi-directional stretching is a common method for preparing high-performance polypropylene (PP) diaphragms, but systematic studies on its process parameters remain limited. This study investigates the effects of key process parameters, such as stretching temperature, multiplicity, and speed, on the pore structure, air permeability, and mechanical properties of PP diaphragms produced by dry bi-directional stretching. The diaphragms were analyzed using scanning electron microscopy (SEM), pore size distribution testing, and mechanical property testing. The results show that stretching temperature significantly affects both the uniformity of the pore structure and the mechanical properties. The optimal stretching temperature is 90 ℃ for longitudinal stretching and 130 ℃ for transverse stretching. Increasing tensile multiplicity improves pore uniformity, with optimal performance achieved at a 3×3 multiplicity. However, excessive multiplicity leads to insufficient pore expansion. Tensile speed significantly impacts the densification and orientation of pore walls, with optimal diaphragm performance achieved at 15 mm/min. The diaphragm, prepared under optimal process parameters, exhibits a porosity of 45%, permeability of 337 s/100 mL, longitudinal tensile strength of 43 MPa, transverse tensile strength of 21 MPa, and puncture strength of 0.07 N/mm. The study shows that the dry bi-directional stretching process parameters significantly affect the pore structure and performance of polypropylene separators for lithium-ion batteries. This provides both a theoretical foundation and practical gui-dance for preparing high-performance diaphragms.
|
|
Published:
Online: 2026-02-13
|
|
|
|
Corresponding Authors:
zhanglong@lut.edu.cn;liguangquan@petrochina.com.cn
|
|
|
1 Saal A, Hagemann T, Schubert U S. Advanced Energy Materials, 2021, 11(43), 2001984. 2 Francis C F J, Kyratzis I L, Best A S. Advanced Materials, 2020, 32(18), 1904205. 3 Jang J, Oh J, Jeong H, et al. Materials, 2020, 13(20), 4625. 4 Zhang L, Li X, Yang M, et al. Energy Storage Materials, 2021, 41, 522. 5 Xu Z C, Xie N M, Diao H K. Energy, 2023, 283, 129167. 6 Xu H Y, Usseglio-Viretta F, Kench S, et al. Journal of Power Sources, 2020, 480, 229101. 7 Lagadec M F, Zahn R, Wood V. Nature Energy, 2019, 4(1), 16. 8 Xiang Y Y, Li J S, Lei J H, et al. ChemSusChem, 2016, 9(21), 3023. 9 Xing J X, Li J Y, Fan W X, et al. Composites Part B:Engineering, 2022, 243, 110105. 10 Xia Q H. Guangdong Chemical Industry, 2018, 45(8), 172(in Chinese). 夏清华. 广东化工, 2018, 45(8), 172. 11 Elgharbawy A S, Ali R M. Heliyon, 2022, 8(7), e09932. 12 Bicy K, Kalarikkal N, Stephen A M, et al. Materials Chemistry and Physics, 2020, 255, 123473. 13 Wang Z D, Zhu H Q, Yang L Z, et al. Plasma Science and Technology, 2016, 18(4), 424. 14 Babiker D M D, Usha Z R, Wan C, et al. Journal of Power Sources, 2023, 564, 232853. 15 Knoche T, Lund R, Prymak O, et al. Materials Today Communications, 2016, 8, 23. 16 Zhang D X, Yang F, Xiang M, et al. Polymer, 2024, 298, 126874. 17 Chen D H, Yin L D, Su Z X, et al. Journal of Polymer Engineering, 2023, 43(9), 791. 18 Ding L, Li D D, Zhang Y J, et al. Journal of Energy Storage, 2024, 96, 112656. 19 Yang F, Wu T, Xiang M, et al. European Polymer Journal, 2017, 91, 134. 20 Ding L, Zhang D X, Yan N, et al. Polymer, 2020, 208, 122958. 21 Wu G G, Chen W B, Ding C, et al. Polymer, 2019, 163, 86. 22 Ding L, Yang F, Wu T, et al. Polymeric Materials Science and Engineering, 2021, 37(1), 118(in Chinese). 丁磊, 杨锋, 吴桐, 等. 高分子材料科学与工程, 2021, 37(1), 118. 23 Ihm D, Noh J, Kim J. Journal of Power Sources, 2002, 109(2), 388. 24 Ding L, Zhang D X, Wu T, et al. Industrial & Engineering Chemistry Research, 2020, 59(10), 4568. 25 Ding L. Polymer, 2020, 196, 122471. 26 Kalnaus S, Kumar A, Wang Y, et al. Journal of Power Sources, 2018, 378, 139. 27 Kalnaus S, Wang Y, Turner J A. Journal of Power Sources, 2017, 348, 255. 28 Chen D H, Chen X D, Yin L D, et al. Journal of Applied Polymer Science, 2023, 140(30), e54080. 29 Wu S Q, Lei C H, Cai Q, et al. Polymer Bulletin, 2014, 71(9), 2205. 30 Xiang M, Cai L Y, Cao Y, et al. Acta Polymerica Sinica, 2015(11), 1235(in Chinese). 向明, 蔡燎原, 曹亚, 等. 高分子学报, 2015(11), 1235. 31 Wu T, Xiang M, Cao Y, et al. RSC Advances, 2014, 4(69), 36689. 32 Zhang D X, Ding L, Yang F, et al. Chinese Journal of Polymer Science, 2021, 39(5), 620. 33 Ding L, Zhang D X, Zhang S H, et al. Journal of Polymer Research, 2021, 28(3), 98. 34 Wu T, Xiang M, Cao Y, et al. RSC Advances, 2014, 4(81), 43012. 35 Yang F, Yang F, Xiang M, et al. Polymer Crystallization, 2021, 4(4), e10183. 36 Zhang D X, Ding L, Yang F, et al. Polymer Journal, 2021, 53(2), 331. 37 Ding L, Wu T, Yang F, et al. Polymer International, 2017, 66(8), 1129. 38 Wu T, Wang K, Chen X F, et al. Science China Chemistry, 2023, 66(4), 993. 39 Gu J F. Stretching process and surface coating modification of polyolefin microporous film for lithium-ion batteries. Ph. D. Thesis, Henan Normal University, China, 2018 (in Chinese). 谷继峰. 锂离子电池用聚烯烃微孔膜的拉伸工艺及表面涂覆改性研究. 博士学位论文, 河南师范大学, 2018. 40 Moghim M H, Nahvibayani A, Eqra R. Polymer Engineering & Science, 2022, 62(9), 3049. 41 Ding L, Li D D, Zhang S H, et al. Polymer International, 2024, 73(1), 38. 42 Zhang D X. Synchronized bi-directional stretching of β-polypropylene for lithium-ion battery diaphragm preparation and its performance study. Master’s Thesis, Sichuan University, China, 2021 (in Chinese). 张道鑫. β聚丙烯同步双向拉伸制备锂离子电池隔膜及其性能研究. 硕士学位论文, 四川大学, 2021. |
|
|
|