直线摆动对钢/铝激光搭接焊接头组织性能的影响

doi:10.11896/cldb.24120236

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (77779KB)
Export: BibTeX | EndNote (RIS)

Abstract The laser lap welding experiment of steel/aluminum was carried out based on a linearoscillation mode. The metallographic microscope, scanning electron microscope and electronic universal testing machine were used to study the changes in weld surface morphology, molten pool microstructure, joint fracture morphology and mechanical properties at different oscillation frequencies. The mechanism of linear oscillation on the microstructure and properties of joints was investigated by combining high-speed cameras, theoretical calculations and numerical simulations. The results show that the weld width increases and the weld depth decreases by changing the laser energy density distribution in the linear oscillation mode, and the metallurgical reaction between Fe and Al is effectively suppressed by the reduction of heat in the weld depth direction, and the layer thickness of intermetallic compounds at the interface greatly reduces. The stable vortex formed by the stirring effect of the beam not only significantly improves the stability of the molten pool and the formability of the weld seam, but also obviously refines grains. The layer segregation during high-frequency oscillation is attributed to the accumulation of Al elements caused by clockwise vortex. The layer thickness of IMCs is the main factor affecting the joint performance. The maximum shear tensile force of the joint increases by 17.6% under the same heat input, and the toughness is also significantly enhanced. Furthermore, the fracture mode of the joint also changes from brittle fracture to mixed fracture.

Key words： steel/aluminum laser lap welding linear oscillation microstructure mechanical property

Published: Online: 2026-02-13

CLC number:

TG456.7

Corresponding Authors: litian@hpu.edu.cn

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Tian
	YAN Youruiling
	NIU Jingjing
	NIU Ying
	GUO Qiang
	ZHOU Dianwu
	ZHANG Mingjun

Cite this article:

LI Tian,YAN Youruiling,NIU Jingjing, et al. Effect of Linear Oscillation on Microstructure and Properties of Steel/Aluminum Laser Lap Welded Joint[J]. Materials Reports, 2026, 40(3): 24120236-7.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.24120236 OR https://www.mater-rep.com/EN/Y2026/V40/I3/24120236

1 Wu J, Xue S B, Fei W P, et al. Materials Reports, 2019, 33(21), 3533(in Chinese).
吴杰, 薛松柏, 费文潘, 等. 材料导报, 2019, 33(21), 3533.
2 Torkamany M J, Tahamtan S, Sabbaghzadeh J. Materials & Design, 2010, 31(1), 458.
3 Xu P Z, Hua X M, Shen C, et al. Materials Characterization, 2021, 178, 111236.
4 Kaushik P, Dwivedi D K. Journal of Manufacturing Processes, 2020, 68, 198.
5 Lu Y, Sage D D, Fink C, et al. Science and Technology of Welding and Joining, 2020, 25(3), 218.
6 Cai C, Xie J, H. Wang, et al. Optics and Laser Technology, 2022, 151, 107989.
7 Ramesh R, Dinaharan I, Ravikumar R, et al. Materials Science and Engineering A, 2020, 780, 139178.
8 Zhou D W, Liu J S, Lu Y Z, et al. Journal of Mechanical Engineering, 2018, 54(14), 58(in Chinese).
周惦武, 刘金水, 卢源志, 等. 机械工程学报, 2018, 54(14), 58.
9 Zhou D W, Peng Y, Xu S H, et al. Acta Metallurgica Sinica, 2013, 49(8), 959(in Chinese).
周惦武, 彭艳, 徐少华. 金属学报, 2013, 49(8), 959.
10 Xia H B, Li L Q, Ma N S, et al. Journal of Materials Processing Technology, 2020, 281, 116624.
11 Yan F, Zhang K, Yang B Y, et al. Optics and Laser Technology, 2021, 138, 106843.
12 Xiao J, Ge X Y, Gai S N, et al. Tansactions of the China Welding Institution, 2024, 45(4), 7(in Chinese).
肖珺, 葛欣雨, 盖胜男, 等. 焊接学报, 2024, 45(4), 7.
13 Wang L, Gao M, Zhang C, et al. Materials and Design, 2016, 108, 707.
14 Zhang C, Li X W, Gao M. Journal of Materials Research and Technology, 2020, 9(4), 9271.
15 Meng Y F, Lu Y, Li Z Y, et al. Intermetallics, 2021, 133, 107175.
16 Meng Y F, Fu J W, Gong M C, et al. Optics and Laser Technology, 2023, 162, 109304.
17 Yang B, Zhao H Y, Wu L J, et al. Journal of Materials Research and Technology, 2020, 9(6), 14630.
18 Li J Z, Liu Y B, Sun Q J, et al. Chinese Journal of lasers, 2020, 47(4), 141(in Chinese).
李军兆, 刘一搏, 孙清洁, 等. 中国激光, 2020, 47(4), 141.
19 Shi L, Li X, Jiang L H G, et al. Science and Technology of Welding and Joining, 2021, 26(5), 349.
20 Sun H M, Niu Y, Jiao F, et al. Materials Reports, 2023, 37(17), 229(in Chinese).
孙海猛, 牛赢, 焦锋, 等. 材料导报, 2023, 37(17), 229.
21 Liu Z G, Xu M Z, Tan C, et al. Materials Reports, 2024, 38(S2), 358(in Chinese).
刘自刚, 徐睦忠, 谭超, 等. 材料导报. 2024, 38(S2), 358.
22 Li T, Zhou D W, Yan Y R L, et al. Optics and Laser Technology, 2021, 141, 107114.
23 Yan F, Zhou Y F, Tang B K, et al. Tansactions of the china welding institution, 2022, 43(5), 98(in Chinese).
闫飞, 周一凡, 唐本刊, 等. 焊接学报, 2022, 43(5), 98.
24 Rivera J, Hosseini M, Restrepo D, et al. Nature, 2020, 586, 543.