基于硬度的TA1薄壁圆管钉套本构模型研究

doi:10.11896/cldb.24090094

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (18065KB)
Export: BibTeX | EndNote (RIS)

Abstract TA1 thin-walled round tube nail sleeve are widely used in aerospacefield due to their excellent mechanical properties. The nail sleeve has a gradient hardness distribution in the axial direction, so the conventional constitutive models cannot accurately predict its mechanical behavior. For this propose, a hardness-based TA1 Johnson-Cook (J-C) improved constitutive model and an artificial neural network (ANN) constitutive model was constructed to support the numerical simulation of thin-walled round tube nail sleeve. The quasi-static and dynamic compression tests of TA1 with different hardness were carried out to study the effects of hardness and strain rate on the mechanical properties of TA1. The improved J-C constitutive model and ANN constitutive model based on hardness were constructed on the basis of experiments, and the accuracy of the two models was analyzed. The numerical simulation of nail sleeve compression of thin-walled round tubes was achieved by embedding the two principal models into ABAQUS through the VUMAT and VUHARD user subroutines, respectively. The results show that both constitutive models have good prediction accuracy. The root-mean-square error of the improved J-C constitutive model is 38.54 MPa, and the average absolute error is 4.07%. While the root-mean-square error of the ANN constitutive model is 2.78 MPa, and the average absolute error is 0.37%. In terms of numerical simulation, the simulation results of the ANN constitutive model maintain a better consistency with the test results, and the relative error between simulation and test keeps within 5%, which can more accurately describe the mechanical behavior of the thin-walled round tube nail sleeve during compression.

Key words： TA1 titanium alloy thin-walled round tube nail sleeve constitutive model neural network numerical simulation

Published: 10 December 2025 Online: 2025-12-03

CLC number:

TG146.23

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	MA Junjie
	FENG Zhiguo
	KANG Fenhang
	LIU Yong

Cite this article:

MA Junjie,FENG Zhiguo,KANG Fenhang, et al. Research on the Constitutive Model of TA1 Thin-Walled Round Tube Nail Sleeve Based on Hardness[J]. Materials Reports, 2025, 39(23): 24090094-8.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.24090094 OR https://www.mater-rep.com/EN/Y2025/V39/I23/24090094

1 Zhang X, Li C. Materials Science and Engineering:A, 2017, 679, 511.
2 Zheng Q, Shimizu T, Shiratori T, et al. Materials & Design, 2014, 63, 389.
3 Shen C, Feng Q, Wang S Q, et al. Materials Reports, 2021, 35(S2), 452(in Chinese)
沈楚, 冯庆, 王思琦, 等. 材料导报, 2021, 35(S2), 452.
4 Zhao L, He X C, Zhang X L, et al. Materials Reports, 2018, 32(20), 3579(in Chinese)
赵伦, 何晓聪, 张先炼, 等. 材料导报, 2018, 32(20), 3579.
5 Feng J. Composite Structures, 2024, 337, 118023.
6 Kelly B, Costello C. Journal of Materials Processing Technology, 2004, 153, 74.
7 Wang Y, Li Y. Fatigue & Fracture of Engineering Materials & Structures, 2024, 7, 2537.
8 Zhao J, Peng Y, Su W, et al. Journal of Constructional Steel Research, 2021, 179, 106558.
9 Jia Z, Guan B, Zang Y, et al. Materials Science and Engineering: A, 2021, 820, 141565.
10 Liu S F, Qu Y H, Wang C L, et al. Materials Reports, 2018, 32(13), 2241(in Chinese)
刘少飞, 屈银虎, 王崇楼, 等. 材料导报, 2018, 32(13), 2241.
11 Jiang T, Zhou W, Tang J, et al. International Journal of Impact Engineering, 2022, 166, 104235.
12 Yang L Y, Duan C Z, Li X R, et al. Journal of Materials Engineering and Performance, 2022, 166, 104235
13 Tao L, Feng Z, Jiang Y, et al. Materials Today Communications, 2024, 39, 109331.
14 Liu X Y, Li S K, Yang X R. Rare Metal Materials and Engineering, 2024, 53(2), 409(in Chinese).
刘晓燕, 李帅康, 杨西荣. 稀有金属材料与工程, 2024, 53(2), 409.
15 Davies E D H, Hunter S C. Journal of the Mechanics and Physics of Solids, 1963, 11(3), 155.
16 Tsukamoto G, Kunieda T, Mitsuhara M, et al. Materials Science and Engineering, A, 2022, 840, 142907.
17 Guo W C, Wu J, Guo M X, et al. Materials Reports, 2025, 39(4), 204(in Chinese)
郭维诚, 吴杰, 郭淼现, 等. 材料导报, 2025, 39(4), 204.
18 Ren J S, Li X L, Xiao S T, et al. Materials Reports, 2020, 34(S1), 283
任军帅, 李欣琳, 肖松涛, 等. 材料导报, 2020, 34(S1), 283.
19 Zhang H X, Fang G. Forging & Stamping Technology, 2024(7), 1(in Chinese)
张韩旭, 方刚. 锻压技术, 2024(7), 1.
20 Pantalé O, Tize Mha P, Tongne A. Finite Elements in Analysis and Design, 2022, 198, 103647.