橡胶的热老化力学性能与本构关系研究进展

doi:10.11896/cldb.23120036

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (9358KB)
Export: BibTeX | EndNote (RIS)

Abstract Rubber, owing to its excellent elasticity, strength, insulation, and toughness, is frequently utilized in the manufacturing of critical components such as vibration isolators, seals, and tires. Thermal aging is a crucial factor influencing the mechanical performance of rubber, leading to premature failure of rubber components and consequently diminishing the overall reliability of engineering systems in which these rubber components are employed. The establishment of precise constitutive models for rubber thermal aging is a key factor in effectively predicting the service life of rubber and optimizing the design of its performance. Currently, researchers have conducted a significant number of mechanical property tests on rubber subjected to thermal aging, and various constitutive models for rubber thermal aging have been proposed. The systematic summarization and synthesis of these models are crucial for a comprehensive understanding, application, and further advancement of rubber thermal aging constitutive models. This paper commences with an exposition on the mechanical property variations in rubber under thermal aging. Subsequently, it categorizes existing constitutive models for rubber thermal aging, placing emphasis on the phenomenological empirical constitutive model, the chemically mechanism-based constitutive model, the chemical structure factor-based constitutive model and the physically informed neural network constitutive model, followed by a comparative analysis and introduction of the various models. Finally, future research directions for rubber thermal aging constitutive models are discussed.

Key words： rubber thermal aging mechanical property constitutive relationship

Published: 10 April 2025 Online: 2025-04-10

CLC number:

O34

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	XIE Zhaonan
	CHEN Junhong
	HUANG Xicheng
	QIU Yong

Cite this article:

XIE Zhaonan,CHEN Junhong,HUANG Xicheng, et al. A Review on Thermal Aging Mechanical Performance and Constitutive Relationships of Rubber[J]. Materials Reports, 2025, 39(7): 23120036-16.

URL:

https://www.mater-rep.com/EN/10.11896/cldb.23120036 OR https://www.mater-rep.com/EN/Y2025/V39/I7/23120036

1 Zhuo J S, Huang D. Constitutive deduction of engineering materials, Science Press, China, 2009, pp. 1(in Chinese).
卓加寿, 黄丹. 工程材料的本构演绎, 科学出版社, 2009, pp. 1.
2 Yang T Q, Luo W B, Xu P, et al. Viscoelastic theory and applications, Science Press, China, 2004, pp. 292(in Chinese).
杨挺青, 罗文波, 徐平, 等. 黏弹性理论与应用, 科学出版社, 2004, pp. 292.
3 Peng X F, Li L X. Chinese Journal of Theoretical and Applied, 2020, 52(5), 1221(in Chinese).
彭向峰, 李录贤. 力学学报, 2020, 52(5), 1221.
4 Boyce M C, Arruda E M. Rubber Chemistry and Technology, 2000, 73(3), 504.
5 Dal H, Açıkgöz K, Badienia Y. Applied Mechanics Reviews, 2021, 73(2), 20802.
6 Steinmann P, Hossain M, Possart G. Archive of Applied Mechanics, 2012, 82(9), 1183.
7 He H, Zhang Q, Zhang Y R, et al. Nano Materials Science, 2022, 4(2), 64.
8 Beda T. European Polymer Journal, 2014, 50, 97.
9 Hu X L, Liu X, Li M, et al. Engineering Mechanics, 2014, 31(5), 34(in Chinese).
胡小玲, 刘秀, 李明, 等. 工程力学, 2014, 31(5), 34.
10 Treloar L R G. Transactions of the Faraday Society, 1943, 39, 241.
11 Mooney M. Journal of Applied Physics, 1940, 11(9), 582.
12 Ogden R W. Proceedings of the Royal Society of London Series A-Mathematical and Physical Sciences, 1972, 326(1567), 565.
13 Yeoh O H. Rubber Chemistry and Technology, 1990, 63(5), 792.
14 Li X B, Wei Y T. Engineering Mechanics, 2016, 33(12), 38(in Chinese).
李雪冰, 危银涛. 工程力学, 2016, 33(12), 38.
15 Arruda E M, Boyce M C. Journal of the Mechanics and Physics of Solids, 1993, 41(2), 389.
16 Miehe C. Journal of the Mechanics and Physics of Solids, 2004, 52(11), 2617.
17 Ding J, Suo S F, Zhang Q, et al. China Synthetic Rubber Industry, 2022, 45(6), 523(in Chinese).
丁军, 索双富, 张琦, 等. 合成橡胶工业, 2022, 45(6), 523.
18 Wei Y T, Fang Q H, Jin Z B, et al. Polymer Bulletin, 2014(5), 15(in Chinese).
危银涛, 方庆红, 金状兵, 等. 高分子通报, 2014(5), 15.
19 Bernstein B, Kearsley E A, Zapas L J. Transactions of the Society of Rheology, 1963, 7(1), 391.
20 Bergstrom J. Journal of the Mechanics and Physics of Solids, 1998, 46(5), 931.
21 Lubliner J. Mechanics Research Communications, 1985, 12(2), 93.
22 Christensen R M. Journal of Applied Mechanics, 1980, 47(4), 762.
23 Dargazany R, Itskov M. International Journal of Solids and Structures, 2009, 46(16), 2967.
24 Chagnon G, Verron E, Marckmann G, et al. International Journal of Solids and Structures, 2006, 43(22-23), 6817.
25 Dorfmann A, Ogden R W. International Journal of Solids and Structures, 2004, 41(7), 1855.
26 Zhao Q L, Li X G, Gao J, et al. Insulating Materials, 2010, 43(1), 37(in Chinese).
赵泉林, 李晓刚, 高瑾, 等. 绝缘材料, 2010, 43(1), 37.
27 Bensalem K, Eesaee M, Hassanipour M, et al. Polymer Degradation and Stability, 2024, 220, 110644.
28 Ha-Anh T, Vu-Khanh T. Polymer Testing, 2005, 24(6), 775.
29 Korba A G, Kumar A, Sun G, et al. Journal of Engineering Materials and Technology, 2018, 140(1), 11006.
30 Liu J, Li X B, Xu L K, et al. Polymer Testing, 2016, 54, 59.
31 Rezig N, Bellahcene T, Aberkane M, et al. Journal of Polymer Research, 2020, 27(11), 339.
32 Zhi J Y, Wang Q L, Zhang M J, et al. Polymer, 2019, 171, 15.
33 Hamed G R, Zhao J. Rubber Chemistry and Technology, 1999, 72(4), 721.
34 Li Y, Liu X, Hu X L, et al. Polymers for Advanced Technologies, 2015, 26(11), 1331.
35 Li Y. Changes in tensile mechanical properties of carbon black filled rubbers by thermal aging. Master's Thesis, Xiangtan University, China, 2015 (in Chinese).
李彦. 热氧老化对炭黑填充橡胶拉伸力学性能的影响. 硕士学位论文, 湘潭大学, 2015.
36 Tobolsky A V, Prettyman I B, Dillon J H. Journal of Applied Physics, 1944, 15(4), 380.
37 Johlitz M, Diercks N, Lion A. International Journal of Plasticity, 2014, 63, 138.
38 Chaabane M, Ding N, Zaïri F. International Journal of Non-Linear Mechanics, 2021, 136, 103783.
39 Yin B Y, Wen H B, Luo W B. npj Materials Degradation, 2022, 6(1), 94.
40 Hou F Y, Song Y H, Zheng Q. Polymer, 2020, 195, 122432.
41 Mohammadi H, Morovati V, Korayem A, et al. Polymer Degradation and Stability, 2021, 191, 109663.
42 Mohammadi H, Morovati V, Poshtan E, et al. Polymer Degradation and Stability, 2020, 175, 109108.
43 Bouaziz R, Ahose K D, Lejeunes S, et al. International Journal of Solids and Structures, 2019, 169, 122.
44 Kittur M I, Andriyana A, Ang B C, et al. Polymer Degradation and Stability, 2022, 204, 110120.
45 Zaghdoudi M, Kömmling A, Jaunich M, et al. Polymer Testing, 2023, 121, 107987.
46 Liu Y K, Zhang Q S, Liu R T, et al. Construction and Building Materials, 2022, 320, 126298.
47 Yang X H, Xu J S, Zhou C S, et al. Journal of Beijing Institute of Technology, 2017, 37(2), 126(in Chinese).
杨晓红, 许进升, 周长省, 等. 北京理工大学学报, 2017, 37(2), 126.
48 Li C J, Ding Y Q, Yang Z, et al. Polymer Testing, 2020, 84, 106366.
49 Ha-Anh T. Influence of thermo-oxidative aging on the mechanical behaviors of polychloroprene. Ph. D. Thesis. Université de Sherbrooke, Canada, 2007.
50 Xie Z M, Wang Y S, Wan Z M, et al. Journal of Harbin Institute of Technology, 2008(9), 1404(in Chinese).
谢志民, 王友善, 万志敏, 等. 哈尔滨工业大学学报, 2008(9), 1404.
51 Korba A G, Kumar A, Barkey M E. In: Proceedings of the ASME 2018 13th International Manufacturing Science and Engineering Conference. College Station, TX, USA, 2018.
52 Korba A G, Barkey M E. In:Proceedings of the ASME 2017 12th International Manufacturing Science and Engineering Conference. College Station, TX, USA, 2017.
53 Korba A G. A model of thermal aging of hyper-elastic materials with an application to natural rubber. Ph. D. Thesis. The University of Alabama, USA, 2017.
54 Korba A G, Kumar A, Barkey M. Journal of Elastomers and Plastics, 2020, 52(8), 677.
55 Lou W T, Xie C Y, Guan X F. Polymer Degradation and Stability, 2022, 198, 109873.
56 A J L, Xie C Y, Lou W T, et al. Ordnance Material Science and Engineering, 2023, 46(4), 15(in Chinese).
阿锦林, 谢朝阳, 娄伟涛, 等. 兵器材料科学与工程, 2023, 46(4), 15.
57 Li Y M, Ma Y H, Luo J R, et al. Journal of Vibration and Shock, 2016, 35(16), 164(in Chinese).
李艳敏, 马玉宏, 罗佳润, 等. 振动与冲击, 2016, 35(16), 164.
58 Ma Y H, Li Y M, Zhao G F, et al. Earthquake Engineering and Engineering Dynamics, 2017, 37(5), 38(in Chinese).
马玉宏, 李艳敏, 赵桂峰, 等. 地震工程与工程振动, 2017, 37(5), 38.
59 Li Q Q, Xu Z D, Dong Y R, et al. Journal of Engineering Mechanics, 2023, 149(1), 4022099.
60 Andrews R D, Tobolsky A V, Hanson E E. Journal of Applied Physics, 1946, 17(5), 352.
61 Dargazany R, Khiêm V N, Navrath U, et al. Journal of Mechanics of Materials and Structures, 2012, 7(8-9), 861.
62 Mohammadi H, Dargazany R. International Journal of Plasticity, 2019, 118, 1.
63 Bahrololoumi A, Shaafaey M, Ayoub G, et al. International Journal of Solids and Structures, 2022, 252, 111800.
64 Bahrololoumi A, Ghaderi A, Shaafaey M, et al. In: Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition. Virtual, Online, 2021.
65 Bahrololoumi A, Shaafaey M, Dargazany R. In: Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition. Columbus, Ohio, 2022.
66 Mohammadi H, Bahrololoumi A, Yang C, et al. In: Proceedings of the 11th European Conference on Constitutive Models for Rubber. Nantes, France, 2019.
67 Johlitz M. The Journal of Adhesion, 2012, 88(7), 620.
68 Johlitz M, Lion A. Continuum Mechanics and Thermodynamics, 2013, 25(5), 605.
69 Musil B, Böhning M, Johlitz M, et al. Continuum Mechanics and Thermodynamics, 2020, 32(1), 127.
70 Musil B, Johlitz M, Lion A. Continuum Mechanics and Thermodynamics, 2020, 32(2), 369.
71 Dippel B, Johlitz M, Lion A. Continuum Mechanics and Thermodynamics, 2014, 26(3), 247.
72 Lion A, Johlitz M. International Journal of Solids and Structures, 2012, 49(10), 1227.
73 Johlitz M. Zum alterungsverhalten von polymeren: experimentell gestützte, thermo-chemomechanische modellbildung und numerische simulation. Ph. D. Thesis, Universität der Bundeswehr München, Germany, 2015.
74 Steinke L, Spreckels J, Flamm M, et al. Plastics, Rubber and Composites, 2013, 40(4), 175.
75 Simo J C, Taylor R L. Computer Methods in Applied Mechanics and Engineering, 1982, 35(1), 107.
76 Hossain M, Possart G, Steinmann P. Computational Mechanics, 2009, 43(6), 769.
77 Hossain M, Possart G, Steinmann P. Computational Mechanics, 2009, 44(5), 621.
78 Septanika E G, Ernst L J. Mechanics of Materials, 1998, 30(4), 253.
79 Septanika E G, Ernst L J. Mechanics of Materials, 1998, 30(4), 265.
80 Budzien J, Rottach D R, Gurro J, et al. Macromolecules, 2008, 41(24), 9896.
81 Rubinstein M, Panyukov S. Macromolecules, 2002, 35(17), 6670.
82 Fricker H S. Proceedings of the Royal Society of London Series A-Mathematical and Physical Sciences, 1973, 335(1602), 267.
83 Rajagopal K R, Wineman A S. International Journal of Plasticity, 1992, 8(4), 385.
84 Wineman A, Min J. International Journal of Non-Linear Mechanics, 2003, 38(7), 969.
85 Shaw J A, Jones A S, Wineman A S. Journal of the Mechanics and Physics of Solids, 2005, 53(12), 2758.
86 Wineman A, Shaw J. Mathematics and Mechanics of Solids, 2019, 24(10), 3103.
87 Wineman A. Journal of Elasticity, 2023, 154(1-4), 199.
88 Jones A S. An experimental study of the thermo-mechanical response of elastomers undergoing scission and crosslinking at high temperatures. Ph. D. Thesis. The University of Michigan, USA, 2003.
89 Beurle D. A micro-mechanically motivated model for the oxidative ageing of elastomers. Ph. D. Thesis, Gottfried Wilhelm Leibniz Universität Hannover, Germany, 2020.
90 Beurle D, André M, Nackenhorst U, et al. In: Virtual Design and Validation, Wriggers P, Allix O, Weißenfels C, ed, Springer Cham, 2020, pp. 271.
91 Beurle D, André M, Nackenhorst U, et al. In: Proceedings of the 11th European Conference on Constitutive Models for Rubber. Nantes, France, 2019.
92 Wineman A, Jones A, Shaw J. Tire Science and Technology, 2003, 31(2), 68.
93 Naumann C. Chemisch-mechanisch gekoppelte Modellierung und Simulation oxidativer Alterungsvorgänge in Gummibauteilen. Ph. D. Thesis, Technische Universität Chemnitz, Germany, 2017.
94 Heczko J, Kottner R, Kossa A. European Journal of Mechanics-A/Solids, 2021, 89, 104320.
95 Naumann C, Ihlemann J. In: Proceedings of the 9th European Conference on Constitutive Models for Rubbers. Prague, Czech republic, 2015.
96 Heczko J, Kottner R. In: Proceedings of the 11th European Conference on Constitutive Models for Rubber. Nantes, France, 2019.
97 Schlomka C, Ihlemann J, Naumann C. In: Proceedings of the 10th European Conference on Constitutive Models for Rubber. Munich, Germany, 2017.
98 Naumann C, Ihlemann J. In: Proceedings of the 8th European Conference on Constitutive Models for Rubbers. San Sebastián, Spain, 2013.
99 Xiong C X. China Synthetic Rubber Industry, 1992(3), 180(in Chinese).
熊传溪. 合成橡胶工业, 1992(3), 180.
100 Houwink R. Journal für Praktische Chemie, 1940, 157(1-3), 15.
101 Zheng W, Zhao X Y, Li Q G, et al. Journal of Applied Polymer Science, 2017, 134(12), 44630.
102 Li Q Q, Xu Z D, Tong Q S, et al. Journal of Applied Polymer Science, 2023, 140(45), 54667.
103 Wang J, Jia H, Ding L, et al. Polymer Composites, 2015, 36(9), 1721.
104 Shakiba M, Najmeddine A. Journal of Mechanics of Materials and Structures, 2022, 17(3), 229.
105 Najmeddine A, Shakiba M. International Journal of Mechanical Sciences, 2024, 262, 108721.
106 Zhi J Y. Experiment and multi-scale simulation of rubber viscoelastic hysteresis heat generation and thermo-oxidative aging. Ph. D. Thesis, Shandong University, China, 2019 (in Chinese).
智杰颖. 橡胶黏弹性滞后生热及热氧老化的实验及多尺度模拟. 博士学位论文, 山东大学, 2019.
107 N'Guyen T A, Lejeunes S, Eyheramendy D, et al. Mechanics of Materials, 2016, 95, 158.
108 Lejeunes S, Eyheramendy D, Boukamel A, et al. Mechanics of Time-Dependent Materials, 2018, 22(1), 51.
109 Ahose K D, Lejeunes S, Eyheramendy D, et al. In: Proceedings of the 11th European Conference on Constitutive Models for Rubber. Nantes, France, 2019.
110 Delattre A, Lejeunes S, Lacroix F, et al. International Journal of Solids and Structures, 2016, 90, 178.
111 Delattre A, Lejeunes S, Méo S, et al. Rubber Chemistry and Technology, 2014, 87(3), 557.
112 Lion A, Dippel B, Liebl C. International Journal of Solids and Structures, 2014, 51(3-4), 729.
113 Colin X, Hassine M B, Nait-Abelaziz M. Rubber Chemistry and Technology, 2019, 92(4), 722.
114 Kalina K A, Linden L, Brummund J, et al. Computational Mechanics, 2022, 69(1), 213.
115 Ghaderi A, Morovati V, Dargazany R. Polymers, 2020, 12(11), 2628.
116 Ghaderi A, Ayoub G, Dargazany R. Journal of Materials Science, 2023, 59, 5066.
117 Ghaderi A, Morovati V, Chen Y, et al. International Journal of Mechanical Sciences, 2022, 223, 107236.
118 Ghaderi A, Chen Y, Dargazany R. In: Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition. Columbus, Ohio, 2022.
119 Li Q Q, Xu Z D, Dong Y R, et al. Construction and Building Materials, 2024, 414, 134920.
120 Achenbach M. Computational Materials Science, 2000, 19(1-4), 213.
121 Duarte J, Achenbach M. Kautschuk Gummi Kunststoffe, 2007, 60(4), 172.
122 Zhi J Y, Wang Q L, Zhang M J, et al. Journal of Applied Polymer Science, 2019, 136(18), 47452.
123 Steinke L, Weltin U, Flamm M, et al. In: Proceedings of the 7th European Conference on Constitutive Models for rubber. Dublin, Ireland, 2011.