温拌沥青胶结料与混合料粘结性能研究

doi:10.11896/cldb.23040041

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (4349KB)
Export: BibTeX | EndNote (RIS)

Abstract The aim of this study is to investigate the bonding performance of three types of warm mix asphalt (WMA) binders and mixtures, including Sasobit-modified asphalt, Evotherm-modified asphalt, and waste cooking oil (WCO)-modified asphalt. Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM) were used to observe the chemical composition of the warm mix additives and the phase structure of asphalt binders. Dynamic shear rheometer (DSR) was used to characterize the cohesion properties of asphalt, binder bond strength (BBS) test was used to characterize the adhesion properties of asphalt-aggregate, and Hamburg wheel tracking (HWT) test was used to characterize the resistance to deformation and stripping of asphalt mixtures. The HWT curve based on the separation deformation was used to characterize the resistance to water damage. The Cantabro loss test was used to characterize the resistance to looseness of asphalt mixtures. The results show that Sasobit improves the cohesion properties of asphalt but has a negative impact on the adhesion between asphalt and aggregates, while Evotherm and WCO have the opposite effect. In the mixture test, Sasobit significantly improves the resistance to deformation and stripping, slightly weakens the resistance to water damage, and significantly weakens the resistance to looseness, while Evotherm and WCO both have a negative impact. For the HWT test, the influence of cohesion properties is more significant, while for the Cantabro loss test, the influence of adhesion properties is more significant. The bonding performance of asphalt mixtures cannot be fully represented by the bonding performance of asphalt binders, and the effects of cohesion properties and adhesion properties should be considered comprehensively.

Key words： warm mix asphalt cohesion adhesion water damage resistance stripping resistance loosening resistance

Published: 25 October 2024 Online: 2024-11-05

CLC number:

U414

Fund:National Key R & D Program of China (2022YFB2602603), Hong Kong Scholars Program (XJ2022040), National Natural Science Foundation of China (52008353), and Sichuan Youth Science and Technology Innovation Research Team (2021JDTD0023,2022JDTD0015).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHEN Xuefeng
	YUN Guangkun
	WU Tewei
	YAN Lihui
	YAN Chuanqi

Cite this article:

CHEN Xuefeng,YUN Guangkun,WU Tewei, et al. Investigating the Bonding Performance of Warm Mix Asphalt Binder and Mixture[J]. Materials Reports, 2024, 38(20): 23040041-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.23040041 OR http://www.mater-rep.com/EN/Y2024/V38/I20/23040041

1 Rubio M C, Martínez G, Baena L, et al. Journal of Cleaner Production, 2012, 24, 76.
2 Oliveira J R M, Silva H M R D, Abreu L P F, et al. Journal of Cleaner Production, 2013, 41, 15.
3 Li Q S, Zhang H L, Shi C J, et al. Journal of Cleaner Production, 2021, 326, 129405.
4 Chen Z H, Zhang H L, Duan H H, et al. Journal of Cleaner Production, 2021, 279, 123675.
5 Xu J Q, Yang E H, Luo H Y, et al. Construction and Building Materials, 2020, 238, 117746.
6 Yuan Y, Zhu X Y, Chen L. Materials & Design, 2020, 185, 108272.
7 Liu S J, Zhou S B, Peng A H. Journal of Cleaner Production, 2020, 277, 123334.
8 Li L. Journal of Municipal Technology, 2022, 40(12), 212 (in Chinese).
李磊. 市政技术, 2022, 40(12), 212.
9 Chen Q W. Journal of Municipal Technology, 2022, 40(3), 1 (in Chinese).
陈启维. 市政技术, 2022, 40(3), 1.
10 Li B, Wang Y N, Lyu Z F, et al. China Journal of Highway and Transport, 2017, 30(10), 39 (in Chinese).
李波, 王永宁, 吕镇锋, 等. 中国公路学报, 2017, 30(10), 39.
11 Zhou L, Huang W D, Lyu Q, et al. Journal of Building Materials, 2021, 24(2), 377 (in Chinese).
周璐, 黄卫东, 吕泉, 等. 建筑材料学报, 2021, 24(2), 377.
12 Guo N S, You Z P, Zhao Y H, et al. China Journal of Highway and Transport, 2014, 27(8), 17 (in Chinese).
郭乃胜, 尤占平, 赵颖华, 等. 中国公路学报, 2014, 27(8), 17.
13 Sun W, Wang H. Applied Surface Science, 2020, 510, 145435.
14 Jattak Z A, Hassan N A, Mohd Satar M K I. Case Studies in Construction Materials, 2021, 15, e636.
15 Lv Q, Lu J, Tang X, et al. Construction and Building Materials, 2022, 340, 127831.
16 Cui S, Blackman B R K, Kinloch A J, et al. International Journal of Adhesion and Adhesives, 2014, 54, 100.
17 Kabir S F, Mousavi M, Fini E H. Journal of Cleaner Production, 2020, 252, 119856.
18 Zhang H J, Li H, Abdelhady A, et al. Journal of Cleaner Production, 2020, 252, 119929.
19 Mogawer W S, Austerman A J, Bahia H U. Transportation Research Record: Journal of the Transportation Research Board, 2011, 2209(1), 52.
20 Vassaux S, Gaudefroy V, Boulangé L, et al. Construction and Building Materials, 2017, 133, 182.
21 Nazzal M D, Abu-Qtaish L, Kaya S, et al. Journal of Materials in Civil Engineering, 2015, 27(10), 04015005.
22 Hamzah M O, Teh S Y, Golchin B, et al. Construction and Building Materials, 2017, 132, 323.
23 Syroezhko A M, Baranov M A, Ivanov S N, et al. Coke and Chemistry, 2011, 54(1), 26.
24 Luo H Y, Leng H K, Ding H B, et al. Construction and Building Materials, 2020, 231, 117118.
25 Yu H Y, Leng Z, Dong Z J, et al. Construction and Building Materials, 2018, 175, 392.
26 Li L, Xin C, Guan M Y, et al. Sustainability, 2021, 13(8), 4373.
27 Zhang H, Jia J S, Tong Y, et al. Journal of Municipal Technology, 2022, 40(1), 70 (in Chinese).
张晗, 贾劲松, 佟禹, 等. 市政技术, 2022, 40(1), 70.
28 Hou X D, Lv S T, Chen Z, et al. Measurement, 2018, 121, 304.
29 Mannan U A, Ahmad M, Tarefder R A. Construction and Building Materials, 2017, 146, 360.
30 Kanitpong K, Bahia H. Transportation Research Record: Journal of the Transportation Research Board, 2005, 1901(1), 33.
31 Zhang Z Q, Luo Y F, Zhang K. Materials Reports, 2017, 31(3), 96 (in Chinese).
张争奇, 罗要飞, 张苛. 材料导报, 2017, 31(3), 96.
32 Yue M J, Yue J J, Wang R R, et al. Construction and Building Materials, 2021, 289, 123054.
33 Liu K F, Zhu J C, Zhang K, et al. Construction and Building Materials, 2019, 217, 301.