高铬铸铁叶片堆焊工艺研究进展

doi:10.11896/cldb.23050109

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (69302KB)
Export: BibTeX | EndNote (RIS)

Abstract Because of its good wear resistance, high chromium cast iron is often used as shot blasting machine blade, large dredging pump impeller and other wear impact occasions. Fatigue damage of wear and crack on the surface of workpiece are usually repaired by stacking welding process to prolong their service life, significantly reduce the resource consumption generated by manufacturing new artifacts. This paper summarizes the influence of the process parameters and the performance of the hot metal welding tape. The influence of welding current, interlayer temperature and cooling condition on the tissue structure and grain size of high chromium cast iron stack and the influence of the welding wire containing vanadium, titanium, niobium and rare earth nanoparticles on the tissue composition and structure of high chromium cast iron stack are discussed respectively; compared with the existing traditional surfacing process, the future development direction of surfacing process is pointed out.

Key words： high chromium cast iron surfacing blade processing parameters drug-core welding tape wear resistance

Published: 10 September 2024 Online: 2024-09-30

CLC number:

TG455

Fund:Key Project of Shandong Provincial Natural Science Fund(ZR2020KE022),General Project of Shandong Natural Science Foundation (ZR2021ME179),and National Natural Science Foundation of China(52175408).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GAO Jichang
	MEN Xiuhua
	JIANG Shuai
	FU Xiuli
	JIANG Zhenfeng
	LI Yan

Cite this article:

GAO Jichang,MEN Xiuhua,JIANG Shuai, et al. Progress of Surfacing Technology of High Chromium Cast Iron Blades[J]. Materials Reports, 2024, 38(17): 23050109-9.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.23050109 OR http://www.mater-rep.com/EN/Y2024/V38/I17/23050109

1 Wang B W, Chen X M, Su Y L, et al. Acta Aeronautica et Astronautica Sinica, 2021, 42(5), 6 (in Chinese).
王彬文, 陈先民, 苏运来, 等. 航空学报, 2021, 42(5), 6.
2 Zhang B, Wang X Q, Tian Y J, et al. Journal of Plasticity Engineering, 2023, 30(2), 16 (in Chinese).
张彪, 王晓强, 田英健, 等. 塑性工程学报, 2023, 30(2), 16.
3 Shaw K D. Materials Science and Engineering A, 2022, 463(2), 46.
4 Luan X S, Liang Z Q, Zhao W X, et al. Journal of Mechanical Engineering, 2023, 59(4), 34 (in Chinese).
栾晓圣, 梁志强, 赵文祥, 等. 机械工程学报, 2023, 59(4), 34.
5 Tian Y, Ma L W, Xi X L. Materials Reports, 2023, 37(3), 185 (in Chinese).
田娅, 马立文, 席晓丽. 材料导报, 2023, 37(3), 185.
6 Yu Y Q, Zhou L C, Gong J N, Surface Technology, 2022, 51(10), 38 (in Chinese).
俞延庆, 周留成, 宫健恩, 等. 表面技术, 2022, 51(10), 38.
7 Tang W Q, Luo J M, Chen Y H, et al. Transactions of Materials and Heat Treatment, 2023, 44(3), 144 (in Chinese).
唐伟清, 罗军明, 陈宇海, 等. 材料热处理学报, 2023, 44(3), 144.
8 Grabowski A, Sozańska M, Adamiak M, et al. Applied Surface Science, 2018, 461, 117.
9 Liao Y, Ye C, Cheng G J. Optics & Laser Technology, 2016, 78, 15.
10 Wu G, Wang Y, Sun M, et al. Journal of Laser Applications, 2020, 32(1), 12.
11 Lao X S, Zhao X F, Liu Y, et al. Materials Science Forum, 2020, 990, 73.
12 Cui Z D, Zhu J M, Jiang H, et al. Acta Metallurgica Sinica, 2022, 58(7), 837 (in Chinese).
崔振铎, 朱家民, 姜辉, 等. 金属学报, 2022, 58(7), 837.
13 Yu J, Cai C, Xie J, et al. Chinese Journal of Lasers, 2022, 49(16), 179(in Chinese).
余杰, 蔡创, 谢佳, 等. 中国激光, 2022, 49(16), 179.
14 Wang K M, Du D, Liu G, et al. Corrosion Science, 2020, 176, 108922.
15 Günther K, Bergmann J P, Suchodoll D. Surface and Coatings Technology, 2018, 334, 420.
16 Zhang H, He J P, Tang L L, et al. Results in Physics, 2019, 13, 102259.
17 Zhang H, Mei K T, Guo W S, et al. Journal of Materials Research and Technology, 2023, 13, 102259.
18 Vdovin K N, Emelyushin A N, Nefed'ev S P. Metal Science and Heat Treatment, 2017, 59, 5.
19 Gong M, Dai S J, Wang T.Machine Tool ＆ Hydraulics, 2021, 49(2), 20 (in Chinese).
龚淼, 戴士杰, 王涛. 机床与液压, 2021, 49(2), 20.
20 Khamari B K, Dash S S, Karak S K, et al. Ironmaking & Steelmaking 2019, 47, 844.
21 Singh D K, Sahoo G, Basu R, et al. Journal of Manufacturing Processes, 2018, 36, 281.
22 Han J, Han Y Q, Sun Z B, et al. The International Journal of Advanced Manufacturing Technology, 2022, 123, 5.
23 Asif H, Shehbaz T, Nawaz K F, et al. SAGE Journals Home, 2022, 236, 9.
24 Vivas J, Fernández Calvo A I, Aldanondo E, et al. Journal of Manufacturing and Materials Processing, 2022, 6, 6.
25 Tong X, Wu G H, Zhang L, et al. Journal of Magnesium and Alloys, 2022, 10, 180.
26 Dennison A V, Toncich D J, Masood S. International Journal of Advanced Manufacturing Technology, 1997, 13(4), 256.
27 Wang Z M, Jiang D H, Wu J W, et al. Journal of Manufacturing Processes, 2020, 60, 503.
28 Wang Y J, Liu W H, Wang D Q, et al. Materials Science and Engineering A, 2021, 807, 140894.
29 Wang Q M, Tong X, Wu G H, et al. Materials Science & Engineering A, 2023, 869, 144816.
30 Praveen P, Kang M, Yarlagadda P. Journal of Achievements in Materials and Manufacturing Engineering, 2009, 32(2), 196.
31 Qin G L, Lei Z, Lin S Y. Science and Technology of Welding and Joining, 2007, 12(1), 79.
32 Fan X C, Qin G L, Jiang Z L, et al. Journal of Materials Research and Technology, 2023, 22, 17.
33 Zhou K, Yu W X, Wang G, et al. Journal of Materials Science, 2023, 58, 23.
34 Xu T. Cemented Carbides, 2011, 28(6), 396 (in Chinese).
徐涛. 硬质合金, 2011, 28(6), 396.
35 Lv H Y, Zhou R F, Li L, et al. Materials, 2018, 11, 1.
36 Liu G Y, Huang J K, Yu X Q, et al. Materials Reports, 2022, 36(12), 149 (in Chinese).
刘光银, 黄健康, 于晓全, 等. 材料导报, 2022, 36(12), 149.
37 Tong X, Wu G H, Easton M A, et al. Scripta Mater. 2022, 215, 114700.
38 Han J Y. Study on surfacing technology of ceramic particle reinforced high chromium cast iron composite. Master's Thesis, General Research Institute of Mechanical Sciences, China, 2021 (in Chinese).
韩佳源. 陶瓷颗粒增强高铬铸铁基复合材料堆焊工艺研究. 硕士学位论文, 机械科学研究总院, 2021.
39 Zhang J L, Wei J J, Wei S Z, et al. Journal of Materials Research and Technology, 2023, 23, 131417.
40 Dong B L, Cai X Y, Xia Y H, et al. Additive Manufacturing, 2021, 48, 102453.
41 Wang L Y, Zou J S, Zhu Z Y, et al. Journal of Jiangsu University of Science and Technology (Natural Science Edition), 2021, 35(6), 23 (in Chinese).
王凌宇, 邹家生, 朱治愿, 等. 江苏科技大学学报(自然科学版), 2021, 35(6), 23.
42 Li L, Liu G Y, Wang P Y, et al. Development and Application of Materials, 2021, 36(5), 72 (in Chinese).
李利, 刘国元, 王鹏云, 等. 材料开发与应用, 2021, 36(5), 72.
43 Hu L, Wang X, Yin X H, et al. Acta Metallurgica Sinica, 2018, 54(12), 1767 (in Chinese).
胡磊, 王学, 尹孝辉, 等. 金属学报, 2018, 54(12), 1767.
44 Baruah M, Bag S. Journal of Materials Processing Technology, 2016, 213, 100.
45 Desai R S, Bag S. Journal of Manufacturing Processes, 2014, 16(2), 264.
46 Zhang J L, Wei J J, Wei S Z, et al. Materials Letters, 2022, 23, 4105.
47 Manvatkar V, De A, Svensson L E, et al. Scripta Materialia, 2015, 94, 36.
48 Nakarin S, Nuengruetai K, Trinet Y. Metals, 2019, 9(2), 244.
49 Sun J, He J, Deng D. Transactions of the China Welding Institution, 2016, 37(1), 63.
50 Huang M Z, Wang S Z, Wang Y M. Materials Protection, 2020, 53(8), 96 (in Chinese).
黄梦真, 王守忠, 王玉美. 材料保护, 2020, 53(8), 96.
51 Kan C L, Zhang X Y, Zhang X Q, et al. Hot Working Technology, 2020, 49(1), 41 (in Chinese).
阚成玲, 张骁勇, 张雪琴, 等. 热加工工艺, 2020, 49(1), 41.
52 Zhang J L, Wei J J, Wei S Z, et al. Tribology International, 2022, 174, 107732.
53 Wang Y, Gou J F, Chu R Q, et al. Tribology International, 2016, 103, 102.
54 Sapate S G, Rama R A V. Wear, 2004, 256, 774.
55 Qu Y, Xing J, Zhi X, et al. Materials Letters, 2008, 62, 3024.
56 Kojola N, Ekerot S, Andersson M, et al. Ironmak Steelmak, 2011, 38, 1.
57 Wang X L, Wang Y J, Liu L Y, et al. Shandong Science, 2021, 34(5), 42 (in Chinese).
王学亮, 王勇杰, 刘立艳, 等. 山东科学, 2021, 34(5), 42.
58 An Y J, Liu X Y, Zhu L. Chinese Rare Earths, 2020, 41(3), 86 (in Chinese).
安亚君, 刘先阳, 朱利. 稀土, 2020, 41(3), 86.
59 Qi X W, Jia Z N, Yang Q X, et al. Surface & Coatings Technology, 2011, 205, 5510.
60 Zhuang M H, Li X X, Ma Z, et al. Materials Today Communications, 2022, 33, 104696.
61 Liu A, Guo M, Hu H L. Surface Engineering, 2010, 26, 623.
62 Bedolla-Jacuinde A, Correa R, Mejia I, et al. Wear, 2007, 263, 808.
63 Wang X H, Zhang M, Du B S, et al. Materials Science and Technology-London, 2010, 26, 935.
64 Arikan M M, Ģimenğlu H C, Kayali E S, Wear, 2001, 247, 231.
65 Gong J X, Ding F, Tang T S, et al. Transactions of the China Welding Institution, 2013, 34(7), 17(in Chinese).
龚建勋, 丁芬, 唐天顺, 等. 焊接学报, 2013, 34(7), 17.
66 Ding F, Gong J X, Xiao Y F, et al. Hot Working Technology, 2013, 42(19), 21 (in Chinese).
丁芬, 龚建勋, 肖逸锋, 等. 热加工工艺, 2013, 42(19), 21.
67 Xian L Q, Zhuang M H, Chen C, et al. Materials Protection, 2022, 55(10), 64 (in Chinese).
线澜清, 庄明辉, 陈超, 等. 材料保护, 2022, 55(10), 64.
68 Liao L T, Wang H Y, Ning J P, et al. Mechanical & Electrical Engineering Technology, 2019, 48(8), 41 (in Chinese).
廖禄泰, 王海艳, 宁嘉沛, 等. 机电工程技术, 2019, 48(8), 41.
69 Buntoeng S, Hein Z O, Salita P, Wear, 2019, 424-425, 246.
70 Xu Y, Deng H M, Shan X H, et al. Hot Working Technology, 2017, 46(15), 194 (in Chinese).
许燕, 邓红敏, 单学海, 等. 热加工工艺, 2017, 46(15), 194.
71 Liu Q, Lu B H. Materials Reports, 2024, 38(9), 1 (in Chinese).
刘倩, 卢秉恒. 材料导报, 2024, 38(9), 1.
72 Deng D W, Chen R, Zhang H C. Journal of Mechanical Engineering, 2013, 49(7), 106 (in Chinese).
邓德伟, 陈蕊, 张洪潮. 机械工程学报, 2013, 49(7), 106.
73 Su Y H, Jiang H W, Qin H, et al. Transactions of the China Welding Institution, 2013, 34(4), 85 (in Chinese).
苏允海, 蒋焕文, 秦浩, 等. 焊接学报, 2013, 34(4), 85.
74 Liu C, Liu C, Su L. Surface Engineering, 2006, 22(3), 173.
75 Wu T L, Wang K H, Kong J, et al. Transactions of the China Welding Institution, 2018, 39(10), 20 (in Chinese).
吴统立, 王克鸿, 孔见, 等. 焊接学报, 2018, 39(10), 20.
76 Sheng L, Dai P, Jing T, et al. Metals, 2018, 8, 630.
77 Fan P F, Sun W L, Zhang G, et al. Hot Working Technology, 2019, 33(22), 3806 (in Chinese).
范鹏飞, 孙文磊, 张冠, 等. 热加工工艺, 2019, 33(22), 3806.
78 Han X, Li C, Chen X X, et al. Surface & Coatings Technology, 2022, 439, 128432.