LLDPE/EPDM共混物的超临界CO<sub>2</sub>微孔发泡研究

doi:10.11896/j.issn.1005-023X.2018.04.022

Abstract
Figure/Table
References
Related Citation (11)

Download:

Full Text ( PDF ) (2897KB)
Export: BibTeX | EndNote (RIS)

Abstract Microcellular foaming of LLDPE/EPDM blend was studied by using supercritical carbon dioxide. Scanning electron microscope was employed to analyze and characterize the morphology of the foaming sample. Thermal properties of the blend was analyzed by differential scanning calorimeter. Rheology behavior and mechanical properties of the sample were studied by rotational rheometer and universal tester microtester respectively. The LLDPE/EPDM blend and compressed standard sample were first obtained, then they were foamed at the high pressure reaction kettle. The impact of foaming parameters including rubber and plastic mass ratio, saturation temperature and saturation pressure on the foaming material's cell structure and cell uniformity were discussed. Using supercritical carbon dioxide as physical foaming agent and optimizing the foaming condition could obtain the closed-cell foaming material which possessed uniform morphology and large bubble density. Meanwhile, the material also presented good toughness and rebound resilience.

Key words： ethylene-propylene-diene monomer linear low density polyethylene supercritical CO₂ microcellular foaming

Published: 25 February 2018 Online: 2018-02-25

CLC number:	TQ320.0
	TQ320.1

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YING Jianxing
	LIU Zhifeng
	HE Dengfeng
	CHEN Zhongren

Cite this article:

YING Jianxing,LIU Zhifeng,HE Dengfeng, et al. Study on Microcellular Foaming of Linear Low-density Polyethylene/Ethylene-Propylene-Diene Monomer Blends Using Supercritical Carbon Dioxide[J]. Materials Reports, 2018, 32(4): 616-620.

URL:

https://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2018.04.022 OR https://www.mater-rep.com/EN/Y2018/V32/I4/616

1 Wang X G. Application of PE closed-cell foam board and polystyrene foam insulation board in canal seepage control engineering[J].Energy Research & Management,2012,30(2):70(in Chinese).
王兴国.PE闭孔泡沫塑料板、聚苯乙烯泡沫保温板在渠道防漏工程中的应用[J].能源研究与管理,2012,30(2):70.
2 Jiang L H. The application of new material in seepage control engineering[J].Science and Technology Information,2012,8(23):63(in Chinese).
江连河.新型材料在防渗工程中的应用[J].科技资讯,2012,8(23):63.
3 Lu F D, Zhang S Y, Du Q X. Study of vibration performance of EPE[J].Packaging Engineering,2011,31(11):1(in Chinese).
卢富德,张邵云,杜启详.发泡聚乙烯隔振性能研究[J].包装工程,2011,31(11):1.
4 Len’kov S V, Molin S M, Kopytov A G. Resonance measurement technique for viscoelastic properties of damping materials of the po-rous closed cellular PE foam type[J].Russian Journal of Nondestructive Testing,2014,50(3):180.
5 Seo J H, et al. Effects of repeated microcellular foaming process on cell morphology and foaming ratio of microcellular plastics[J].Polymer-Plastics Technology and Engineering,2011,50(6):588.
6 Mills N J, et al. Finite element micromechanics model of impact compression of closed-cell polymer foams[J].International Journal of Solids and Structures,2009,46(3-4):677.
7 Danaei M, Sheikh N, Faroni F A. Radiation cross-linked polyethylene foam preparation and properties[J].Journal of Cellular Plastics,2005,41(6):551.
8 Kwon Y K, Bae H K. Production of microcellular foam plastics by supercritical carbon dioxide[J].Korean Journal of Chemical Engineering,2007,24(1):127.
9 Sumarno, et al. Production of polystyrene microcellular foam plastics and a comparison of late-and quick-heating[J].Journal of Applied Polymer Science,2015,77(11):2383.
10 Rodríguez-Pérez M A, et al. Thermal conductivity of physically crosslinked closed cell polyolefin foams[J].Polymer Testing,1997,16(3):287.
11 Cao X M, Hang Z S, Ying S J. Research progresses in control of the cell morphology of microcellular polymeric foams[J].Materials Review A:Review Papers,2012,26(6):69(in Chinese).
曹晓苗,杭祖圣,应三九.微孔发泡聚合物泡孔形貌控制的研究进展[J].材料导报:综述篇,2012,26(6):69.
12 Colton J S,Suh N P. The nucleation of microcellular thermoplastic foam with additives: Part Ⅰ: Theoretical considerations[J].Polymer Engineering & Science,1987,27(7):485.
13 Raj W R P, Sasthav M, Cheung H M. Microcellular polymeric materials from microemulsions: Control of microstructure and morphology[J].Journal of Applied Polymer Science,1993,47(3):499.
14 Dixon D J, Johnston K P ,Bodmeier R A.Polymeric materials formed by precipitation with a compressed fluid antisolvent[J].Aiche Journal,1993,39(39):127.
15 Park C B, Baldwin D F, Suh N P. Effect of the pressure drop rate on cell nucleation in continuous processing of microcellular polymers[J].Polymer Engineering & Science,1995,35(5):432.
16 Goren K, et al. Influence of nanoparticle surface chemistry and size on supercritical carbon dioxide processed nanocomposite foam morphology[J].Journal of Supercritical Fluids,2010,51(3):420.17 Li Y N. Review on the progress of open-cell polymeric foams[J].Materials Review A:Review Papers,2015,29(9):15(in Chinese).
李妍凝.超临界流体技术制备聚合物开孔发泡材料的研究进展[J].材料导报:综述篇,2015,29(9):15.
18 Kitano T, Hashmi S A R, Chand N. Influence of steady shear flow on dynamic viscoelastic properties ofun-reinforced and glass fibre reinforced LLDPE[J].Indian Academy of Sciences,2004,27(5):409.
19 Yamaguchi M, Abe S. LLDPE/LDPE blends. Ⅰ. Rheological, thermal, and mechanical properties[J].Journal of Applied Polymer Science,2015,74(13):3153.
20 Li B, He J. Investigation of mechanical property, flame retardancy and thermal degradation of LLDPE-wood-fibre composites[J].Polymer Degradation & Stability,2004,83(2):241.
21 Li T. The stucture characteristic of polyethlene chemical materials and application development[J].Chemical Industry,2014,32(1):20(in Chinese).
李婷.聚乙烯化工材料的结构特点和应用发展[J].化学工业,2014,32(1):20.
22 Zhou X T, Cao Y M. EPDM/LDPE thermoplastic elastomer foamed by supercritical carbon dioxide[J].China Rubber Industry,2015,62(9):523(in Chinese).
周晓涛,曹有名.超临界二氧化碳发泡三元乙丙橡胶/低密度聚乙烯热塑性弹性体[J].橡胶工业,2015,62(9):523.
23 Manzur A, Olayo R, Ramos E. Effect of EPDM on LDPE/LLDPE blends: Mechanical properties[J].Journal of Applied Polymer Science,2015,65(4):677.
24 Jeong K M, et al. Novel polymer composites from waste ethylene-propylene-diene-monomer rubber by supercritical CO2 foaming technology[J].Waste Management & Research the Journal of the International Solid Wastes & Public Cleansing Association Iswa,2014,32(11):1113.
25 Lei W H, Zhao Q. Development of peroxide-vulcanized EPDM foam[J].China Rubber Industry,2002,49(5):1000(in Chinese).
雷卫华,赵祺.过氧化物硫化EPDM发泡材料的研制[J].橡胶工业,2002,49(5):1000.
26 Park C P. Process for making lightly crosslinked linear polymer foams:US,43147[P].1992-01-15.
27 Faez R, et al. Microwave properties of EPDM/PAni-DBSA blends[J].Synthetic Metals,2001,119(1):435.
28 Alaga M, et al. Studies on thermal, thermal ageing and morphological characteristics of EPDM-g-VTES/LLDPE[J].European Polymer Journal,2006,42(2):336.