热养护UHPC后期水稳定性

Abstract
Figure/Table
References
Related Citation (14)

Download:

Full Text ( PDF ) (7219KB)
Export: BibTeX | EndNote (RIS)

Abstract Thermal curing can improve the early mechanical properties of UHPC and promote hydration of UHPC, but it also brings about the water stability in the long-term of UHPC. The mechanical properties, SEM, XRD and pore structure analysis were used to study the long-term mechanical properties and microstructure of UHPC under three curing systems: 20 ℃ standard curing, 90 ℃ steam curing and 250 ℃ dry and hot curing which contact moisture and isolate moisture. The test results indicated that the contact and isolation water had little influence on the strength and microstructure of the specimen under 20 ℃ standard curing and 90 ℃ steam curing. The contact water could better improve the strength of the specimen in the later stage. The contact water would significantly increase the microscopic pores of the specimen, leading to obvious strength shrinkage in the later period and causing serious water stability problems under 250 ℃ dry curing.

Key words： UHPC moisture susceptibility late hydration long-term performance

Published: 16 July 2021

CLC number:

TU5

Fund:National Natural Science Foundation of China (52002041), Research and Development Project of Ministry of Hou-sing and Urban-Rural Development of China (K2019248), China Construction Group Project (CSCEC-2019-Z-17-6), Technology R&D Plan of China West Construction Group Co.,Ltd (ZJXJ-2019-13).

About author:: Yaoling Luo, he was born in 1989,engineer,doctor,mainly engaged in the research of UHPC, cement concrete durability, new cementing materials and so on.

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LUO Yaoling
	GAO Yuxin
	YAN Xinyi
	XIE Yuhao
	BI Yao

Cite this article:

LUO Yaoling,GAO Yuxin,YAN Xinyi, et al. Moisture Susceptibility of UHPC After Heat Curing[J]. Materials Reports, 2021, 35(Z1): 242-246.

URL:

http://www.mater-rep.com/EN/ OR http://www.mater-rep.com/EN/Y2021/V35/IZ1/242

1 Sedran F D L.Cement and Concrete Research, 1994, 24(6), 997.
2 Tuan N V, Ye G, Breugel K V, et al.Construction and Building Mate-rials, 2011, 25(4), 2030.
3 Tuan N V, Hanh P H, Thanh L T, et al. In: Proceedings of CIGOS-2010 Immeubles de grande Hauteur et Ouvrages Souterrains. Paris, 2010.
4 Powers T C, Brownyard T L.ACI Journal Proceedings,DOI: 10.14359/15301.
5 Loukili A, Richard P, Lamirault J. A study on delayed deformations of an ultra high strength cementitious material.ACI Special Publication,1998.
6 Vandamme M, Ulm F J, Fonollosa P. Cement and Concrete Research, 2010, 40(1), 14.
7 Hillemeier B, Schroder M. In: Durability of high performance concrete, Proc. RILEM workshop Cachan France. 1995, pp:70.
8 Pushpalal G K D, Kobayashi T, Hasegawa M.Cement and Concrete Research, 1997, 27(9),1393.
9 Peiliang Shen, Linnu Lu, Yongjia He, et al.Cement and Concrete Research, 2019, 118,1.
10 Hiremath P N, Yaragal S C. Construction and Building Materials, 2017,154,72.
11 Yazc H, Yardmcm Y, Aydn S, et al. Construction and Building Mate-rials, 2009(3),1223.
12 Hiremath P, Yaragal S C.Materials Today: Proceedings, 2017(9),9758.
13 Helmi M, Hall M R, Stevens L A, et al.Construction and Building Materials, 2016(12),554.
14 Zdeb T.Construction and Building Materials, 2017(11),758.
15 Chen T, Gao X, Ren M.Construction and Building Materials, 2018(10), 864.
16 Tam C M, Wing V, Yan T.Magazine Concrete Research, 2013(3),259.
17 Peng Gaifei, Niu Xujing, Shang Yajie, et al.Cement and Concrete Research, 2018,109, 147.
18 Parameshwar Hiremath, Subhash C Y. Materials Today: Proceedings, 2017,4(9), 9758.
19 刘斯凤,孙伟,张云升,等.工业建筑, 2002(6),1.
20 葛晓丽,刘加平,王育江,等. 土木建筑与环境工程,2016,38(1),40.
21 杨吴生,黄政宇,汤拉娜,等. 湖南大学学报(自然科学版), 2003(S1),150.
22 Shamsad Ahmad, Mehboob Rasul, Saheed Kolawole Adekunle, et al.Composites Part B: Engineering, 2019, 168, 291.