不同挤压工况下圆柱形锂离子电池的压缩响应研究

doi:10.11896/cldb.23090101

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (3059KB)
Export: BibTeX | EndNote (RIS)

Abstract To meet the requirements of safety operation of lithium-ion batteries (LIBs) under mechanical abuse, a combined approach of experimental testing and finite element simulation was employed to investigate the deformation responses and failure mechanisms of LIBs under different compression conditions. A self-built three-dimensional digital image correlation platform was utilized to conduct compression experiments on 18650 cylindrical cells, and the mechanical-electro-thermal response behaviors of LIBs under various compression conditions were investigated, including plane compression, local indentation, and spherical indentation. Additionally, a multiphysics coupling model of cylindrical LIBs under compression loads was established using COMSOL Multiphysics. The influence of loading methods on the compression response of LIBs was discussed in detail, and the comparison of the simulated results with the experimental results showed good consistence. The research results indicate that consistent response characteristics are exhibited under plane compression and local compression conditions. The load-bearing capacity reaches its peak and then declines rapidly. Moreover, the peak force of the battery under plane compression is higher than that under local indentation, and the load-bearing capacity of the cell increases with the state of charge (SOC). This work offers valuable insights for the multifunctional design and safety assessment of LIBs.

Key words： lithium-ion battery compression mechanical-electro-thermal response battery failure multiphysics

Published: 25 October 2024 Online: 2024-11-05

CLC number:

TM912

Fund:Hebei Natural Science Foundation (A2020502005).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Tao
	ZHENG Jiahao
	ZHANG Xinchun
	WU Xiaonan
	HUANG Zixuan
	YIN Xiaodi
	ZHANG Xiaocui
	ZHANG Yingjie

Cite this article:

ZHANG Tao,ZHENG Jiahao,ZHANG Xinchun, et al. Study on Compression Responses of Cylindrical Lithium-ion Batteries Under Various Compression Conditions[J]. Materials Reports, 2024, 38(20): 23090101-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.23090101 OR http://www.mater-rep.com/EN/Y2024/V38/I20/23090101

1 Lai X, Chen Q W, Gu H H, et al. Journal of Mechanical Engineering, 2022, 58(22), 3 (in Chinese).
来鑫, 陈权威, 顾黄辉, 等. 机械工程学报, 2022, 58(22), 3.
2 Wu Q, Xu Y J, Zhong Z X, et al. Materials Reports, 2024, 38(11), 22110030 (in Chinese).
吴琼, 许咏杰, 钟展雄, 等. 材料导报, 2024, 38(11), 22110030.
3 Yin X D, Zhang T, Zhang X C, et al. Materials Reports, 2024, 38(2), 22070154 (in Chinese).
尹啸笛, 张涛, 张新春, 等. 材料导报, 2024, 38(2), 22070154.
4 Li H G, Zhang C, Cao J C, et al. Journal of Mechanical Engineering, 2022, 58(24), 121(in Chinese).
李红刚, 张超, 曹俊超, 等. 机械工程学报, 2022, 58(24), 121.
5 Liu N N, Zhang X C, Dong S J, et al. Chinese Journal of Applied Mechanics, 2024(4), 1 (in Chinese).
刘南南, 张新春, 董思捷, 等. 应用力学学报, 2024(4), 1.
6 Xu J, Jia Y, Liu B, et al. Experimental Mechanics, 2018, 58, 633.
7 Dong S J, Zhang X C, Wang Y L, et al. China Mechanical Engineering, 2022, 33(8), 915 (in Chinese).
董思捷, 张新春, 汪玉林, 等. 中国机械工程, 2022, 33(8), 915.
8 Zhang, X C, Liu N N, Dong S J, et al. ASME Journal of Electrochemical Energy Conversion and Storage, 2023, 20(4), 041010.
9 Wang H, Duan X, Liu B. Journal of Electrochemical Energy Conversion and Storage, 2021, 18(2), 021015.
10 Mo F, Tian Y, Zhao S, et al. Engineering Failure Analysis, 2022, 137, 106399.
11 Hu L L, Zhang Z W, Zhou M Z, et al. International Journal of Impact Engineering, 2020, 143, 103618.
12 Liu B, Jia Y, Yuan C, et al. Energy Storage Materials, 2020, 24, 85.
13 Jia Y, Li J, Yuan C, et al. Advanced Energy Materials, 2021, 11(18), 2003868.
14 Liu B, Zhao H, Yu H, et al. Electrochimica Acta, 2017, 256, 172.
15 Duan X, Wang H, Jia Y, et al. Energy Storage Materials, 2022, 45, 667.
16 Wang W, Yang S, Lin C, et al. Journal of Power Sources, 2020, 451, 227749.
17 Wang W, Yang S, Lin C, et al. IEEE Access, 2018, 6, 26358.
18 Wierzbicki T, Sahraei E. Journal of Power Sources, 2013, 241, 467.
19 Said M S M, Tohir M Z M. Journal of Loss Prevention in the Process Industries, 2022, 79, 104854.
20 Xu Y, Liu F, Guo J, et al. Ionics, 2022, 28, 107.
21 Li H, Liu B, Zhou D, et al. Journal of the Electrochemical Society, 2020, 167(12), 120501.
22 Xu J, Liu B, Wang L, et al. Engineering Failure Analysis, 2015, 53, 97.
23 Li Y D, Wang W W, Lin C, et al. Journal of Cleaner Production, 2021, 286, 125451.
24 Luo H, Xia Y, Zhou Q. Journal of Power Sources, 2017, 357, 61.