强制流动下铝铜合金激光焊接熔池凝固过程组织演化模拟

doi:10.11896/cldb.23060085

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (26381KB)
Export: BibTeX | EndNote (RIS)

Abstract In this work, a cellular automaton-finite difference-lattice Boltzmann (CA-FD-LB) coupled model was developed to simulate dendrite evolution during the whole solidification process of the Al-Cu alloy welding pool. The first and second vortices' locations in the lid driven flow were simulated. And the results show a high agreement with the results that have been published in the literature. The quantitative relationship between the growth rate of dendritic tip and the undercooling under isothermal pure diffusion circumstances exhibits outstanding agreement with the predictions of the Lipton Glicksman Kurz (LGK) model. In the presence of external flow, the growth morphology of dendrites demonstrates asymmetry because the solute diffusion layer at the upstream tip of the dendrites becomes narrower under the effect of squeezing of flow, resulting in a larger concentration gradient that promotes growth. Conversely, the downstream region exhibits the opposite behavior. Additionally, flow enhances the solidification process, leading to a shorter solidification time. The results of simulation and experiment are 117 μm and 91 μm respectively, and the relative error is about 28.6%, showing the reliability of the coupled model.

Key words： aluminum alloy laser welding microstructure simulation cellular automaton lattice Boltzmann

Published: 10 October 2024 Online: 2024-10-23

CLC number:

TG 456.7

Fund:National Natural Science Foundation of China (52275341) and Interdisciplinary Innovation Fund for Doctoral Students of Nanjing University of Aeronautics and Astronautics (KXKCXJJ202307).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CAI Jiasi
	LIU Xiangbo
	WANG Xinyuan
	WEI Yanhong

Cite this article:

CAI Jiasi,LIU Xiangbo,WANG Xinyuan, et al. Simulation of Microstructure Evolution During Solidification Process in Laser Welded Molten Pool of Al-Cu Alloy Under Forced Flow[J]. Materials Reports, 2024, 38(19): 23060085-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.23060085 OR http://www.mater-rep.com/EN/Y2024/V38/I19/23060085

1 Fu Y S, Lu C, Ye X J, et al. Journal of Mechanical Engineering, 2023, 59(5), 291 (in Chinese).
付艳恕, 卢聪, 叶小军, 等. 机械工程学报, 2023, 59(5), 291.
2 Lei Y F. Study on solidification process of welding pool under rapid cooling condition based on lattice boltzmann method. Master's Thesis, Hebei University of Technology, China, 2019 (in Chinese).
雷云峰. 基于LBM的急冷条件下焊接熔池凝固过程的研究. 硕士学位论文, 河北工业大学, 2019.
3 Ma R. Simulation of microstructure evolution during welding solidification of nickel-based alloy. Ph.D. Thesis, Harbin Institute of Technology, China, 2010 (in Chinese).
马瑞. 镍基合金焊接熔池凝固过程微观组织模拟. 博士学位论文, 哈尔滨工业大学, 2010.
4 Tong X, Beckermann C, Karma A, et al. Physical Review E, DOI: 10. 1103/PhysRevE. 63. 061601.
5 Zhang X F, Zhao J Z. Acta Metallurgica Sinica, 2012, 48(5), 615.
6 Zhu M F, Dai T, Lee S Y, et al. Science in China Series E-Technological Sciences, 2005, 48(3), 241.
7 Zhu M F, Dai T, Lee S Y, et al. Computers & Mathematics with Applications, 2008, 55(7), 1620.
8 Sun D K, Zhu M F, Yang Z R, et al. Acta Physica Sinica, 2009, 58(S1), 285 (in Chinese).
孙东科, 朱鸣芳, 杨朝蓉, 等. 物理学报, 2009, 58(S1), 285.
9 Wu W, Sun D K, Dai T, et al. Acta Physica Sinica, 2012, 61(15), 39 (in Chinese).
吴伟, 孙东科, 戴挺, 等. 物理学报, 2012, 61(15), 39.
10 Miller W, Succi S, Mansutti D, et al. Physical Review Letters, 2001, 86(16), 3578.
11 Gu C, Wei Y H, Zhan X H, et al. Science and Technology of Welding and Joining, 2017, 22(1), 47.
12 Wei Y H, Zhan X H, Dong Z B, et al. Science and Technology of Welding and Joining, 2007, 12(2), 138.
13 Wei Y H, Zhan X H, Dong X B, et al. Transactions of the China Welding Institution, 2009, 30(3), 13.
14 He Y L, Wang Y, Li Q. Lattice Boltzmann method: theory and applications, Science Press, China, 2009, pp.53.
何雅玲, 王勇, 李庆. 格子Boltzmann方法的理论及应用, 科学出版社, 2009, pp.53.
15 Zhan X H. Simulation of dendritic grain growth in weld pool of nickel-chromium binary alloy. Ph.D. Thesis, Harbin Institute of Technology, China, 2008 (in Chinese).
占小红. Ni-Cr二元合金焊接熔池枝晶生长模拟. 博士学位论文, 哈尔滨工业大学, 2008.
16 Rappaz M, Desbiolles J L, Gandin C A, et al. Metallurgical and Meterials Transactions A, 1996, 27(3), 695.
17 Nastac L. Acta Materialia, 1999, 47(17), 4253.
18 Vanka S P. Journal of Computational Physics, 1986, 65(1), 138.
19 Ghia U, Ghia K N, Shin C T. Journal of Computational Physics, 1982, 48(3), 387.
20 Hou S L, Zou Q S, Chen S Y, et al. Journal of Computational Physics, 1994, 118(2), 329.
21 Zhou J C, Li R, Yang Y Y, et al. Foundry Technology, 2017, 38(5), 1088 (in Chinese).
周靖超, 李日, 杨莹莹, 等. 铸造技术, 2017, 38(5), 1088.