| METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
| Research on Regulating Corrosion Resistance of Mg-5Zn-0.6Zr Alloy by Friction Stir Processing |
| LONG Fei1,2, LIU Qu1,2, ZHU Yixing1,2, ZHOU Mengran1,2, CHEN Gaoqiang1,2, SHI Qingyu1,2,*
|
1 State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment, Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China
2 Key Laboratory for Advanced Materials Processing Technology, Ministry of Education, Beijing 100084, China |
|
|
|
|
Abstract As a lightweight material with sufficient reserves, high specific strength and specific modulus, the application of magnesium is very promising. The poor corrosion resistance of magnesium seriously limits its application, and galvanic corrosion caused by larger precipitates is an important reason for the poor corrosion resistance of magnesium alloys. In this work, the as-cast Mg-5Zn-0.6Zr alloy was selected as the object of study, and this alloy was friction stir processed. The microstructure and electrochemical properties were examined and analyzed before and after friction stir processing (FSP). The results indicated that after processed by FSP, the Mg-5Zn-0.6Zr alloy exhibited a strong (0001) basal texture with low dislocation density in most regions. The grain size was refined from 66.4 μm to the order of 1.6 μm, and there was a certain level of fragmentation and dispersed distribution of the precipitates. In a 3.5%(% refers to the mass fraction, if not otherwise stated) NaCl aqueous solution, the corrosion current density decreased from 38.3 μA/cm2 to 17.0 μA/cm2 at open circuit potential. Moreover, the polarization resistance increased from 48.98 Ω·cm2 to 197.02 Ω·cm2.The study indicated that FSP could effectively improve the corrosion resistance of magnesium alloy.
|
|
Published: 25 May 2024
Online: 2024-05-28
|
|
|
| Fund:National Natural Science Foundation of China (52035005, 52175334). |
|
|
1 Ding W J, Wu G H, Li Z Q, et al. Aerospace Shanghai, 2019, 52(10), 1(in Chinese).
丁文江, 吴国华, 李中权, 等. 上海航天, 2019, 36(2), 1.
2 Long F, Chen G Q, Zhou M R, et al. Journal of Magnesium and Alloys, 2023, 11, 1931.
3 Li H, Wen J B, He J G, et al. Transactions of Materials and Heat Treatment, 2019, 40(7), 1(in Chinese).
李欢, 文九巴, 贺俊光, 等. 材料热处理学报, 2019, 40(7), 1.
4 Chen G Q, Li H, Wang G Q, et al. International Journal of Machine Tools and Manufacture, 2018, 124, 12.
5 Xie T F, Xing L, Ke L M, et al. Hot Working Technology, 2008(7), 64(in Chinese).
谢腾飞, 邢丽, 柯黎明, 等. 热加工工艺, 2008(7), 64.
6 Sato J, Omori T, Oikawa K, et al. Science, 2006, 312, 90.
7 Song G L, Atrens A, Dargusch M, et al. Corrosion Science, 1998, 41(2), 249.
8 Song G L, Atrens A. Advanced Engineering Materials, 1999, 1(1), 11.
9 Song G L, Xu Z Q. Corrosion Science, 2012, 54, 97.
10 Song G L, Mishra R, Xu Z Q. Electrochemistry Communications, 2010, 12(8), 1009.
11 Ralston K D, Birbilis N. Corrosion, 2010, 66(7), 0750051.
12 Zeng R C, Chen J, Dietzel W, et al. Corrosion Science, 2009, 51, 1738.
13 Xu X X, Zhu S J, Wang Q, et al. Journal of Aeronautical Materials, 2019, 39(1), 9(in Chinese).
徐雪雪, 朱世杰, 王 青, 等. 航空材料学报, 2019, 39(1), 9
14 Shi X T, Zhu Y Y, Li G Q, et al. Journal of Aeronautical Materials, 2019, 39(1), 17(in Chinese).
师晓亭, 朱园园, 李国强, 等. 航空材料学报, 2019, 39(1), 17.
15 Ding Z Y, Cui L Y, Zeng R C. Surface Technology, 2019, 48(3), 1(in Chinese).
丁自友, 崔蓝月, 曾荣昌. 表面技术, 2019, 48(3), 1.
16 Zeng R C, Chen J, Zhang J. Materials Reports, 2008, 22(1), 107(in Chinese).
曾荣昌, 陈君, 张津. 材料导报, 2008, 22(1), 107.
17 Zeng R C, Cui L Y, Ke W. Acta Metallurgica Sinica, 2018, 54(9), 1215(in Chinese).
曾荣昌, 崔蓝月, 柯伟. 金属学报, 2018, 54(9), 1215.
18 Song D, Ma A B, Jiang J H, et al. Corrosion Science, 2011, 53(1), 362. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2024, Vol. 38 
