Please wait a minute...
材料导报  2025, Vol. 39 Issue (6): 24010168-11    https://doi.org/10.11896/cldb.24010168
  高分子与聚合物基复合材料 |
碳纤维增强复合材料阻尼性能的研究进展
孙国栋*, 吕龙飞, 解静, 贾研*, 康凯, 郑斌, 尹昭怡, 田清来
长安大学材料科学与工程学院,西安 710064
Research Progress on Damping Properties of Carbon Fiber Reinforced Composites
SUN Guodong*, LYU Longfei, XIE Jing, JIA Yan*, KANG Kai, ZHENG Bin, YIN Zhaoyi, TIAN Qinglai
School of Materials Science and Engineering, Chang'an University, Xi'an 710064, China
下载:  全 文 ( PDF ) ( 15292KB ) 
输出:  BibTeX | EndNote (RIS)      
摘要 针对工程应用中不可避免的振动、冲击和噪声等引起的零件失效、精度下降和结构损伤等一系列负面影响,材料阻尼性能的研究和预测显得尤为重要。碳纤维增强复合材料作为结构材料,其阻尼性能受到国内外专家学者的广泛关注。本文阐述了碳纤维增强复合材料的阻尼来源和预测阻尼性能的主要方法,以树脂基、陶瓷基、碳质基、金属基和夹层材料为例,介绍了国内外专家学者在基体改性、夹层材料和损伤破坏对碳纤维增强复合材料阻尼性能的影响方面的主要研究成果,并对碳纤维增强复合材料阻尼性能的研究进行了总结。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
孙国栋
吕龙飞
解静
贾研
康凯
郑斌
尹昭怡
田清来
关键词:  碳纤维增强复合材料  阻尼性能  基体改性  夹层材料  损伤破坏    
Abstract: The research and prediction of material damping properties are particularly important in view of a series of negative effects such as parts fai-lure, precision decline and structural damage caused by unavoidable vibration, shock and noise in engineering applications. As a structural material, the damping properties of carbon fiber reinforced composites are widely concerned by experts and scholars at home and abroad. In this paper, the damping sources and the main methods for predicting damping properties of carbon fiber reinforced composites are described. Taking resin base, ceramic base, carbon base, metal base and sandwich materials as examples, the main research achievements of domestic and fo-reign experts on the influence of matrix modification, sandwich materials and damage on the damping properties of carbon fiber reinforced composites are introduced, and the research on damping properties of carbon fiber reinforced composites is summarized.
Key words:  carbon fiber reinforced composite    damping capacity    matrix modification    sandwich material    damage and failure
出版日期:  2025-03-25      发布日期:  2025-03-24
ZTFLH:  TB34  
基金资助: 国家自然科学基金(52272034);陕西省重点研发计划(2023JBGS-15);陕西省自然科学基础研究计划(2020JQ-372);长安大学中央高校基本科研业务费专项资金(300102313202)
通讯作者:  *孙国栋,长安大学材料科学与工程学院教授、博士研究生导师。目前主要从事C/C复合材料改性及涂层制备、力学性能、阻尼性能以及微结构表征方面的研究工作。
贾研,长安大学材料科学与工程学院讲师、硕士研究生导师。目前主要从事C/C复合材料的设计与制备以及力学性能和电磁屏蔽性能的调控等方面的研究工作。sunguodong@chd.edu.cn;jiayan@chd.edu.cn   
作者简介:  孙国栋,长安大学材料科学与工程学院教授、博士研究生导师。目前主要从事C/C复合材料改性及涂层制备、力学性能、阻尼性能以及微结构表征方面的研究工作。
引用本文:    
孙国栋, 吕龙飞, 解静, 贾研, 康凯, 郑斌, 尹昭怡, 田清来. 碳纤维增强复合材料阻尼性能的研究进展[J]. 材料导报, 2025, 39(6): 24010168-11.
SUN Guodong, LYU Longfei, XIE Jing, JIA Yan, KANG Kai, ZHENG Bin, YIN Zhaoyi, TIAN Qinglai. Research Progress on Damping Properties of Carbon Fiber Reinforced Composites. Materials Reports, 2025, 39(6): 24010168-11.
链接本文:  
https://www.mater-rep.com/CN/10.11896/cldb.24010168  或          https://www.mater-rep.com/CN/Y2025/V39/I6/24010168
1 Ren Y S, Liu L H. Mechanics in Engineering, 2004, 26(1), 9 (in Chinese).
任勇生, 刘立厚. 力学与实践, 2004, 26(1), 9.
2 Zhang S H, Chen H L. Journal of Aeronautical Materials, 2002, 22(1), 58 (in Chinese).
张少辉, 陈花玲. 航空材料学报, 2002, 22(1), 58.
3 Yu Q Y, Ma Y P, Guo W T, et al. Journal of Materials Engineering, 2007(S1), 253 (in Chinese).
余启勇, 马玉璞, 郭万涛, 等. 材料工程, 2007(S1), 253.
4 Liu T. Fiber Composites, 2016, 33(2), 28 (in Chinese).
刘涛. 纤维复合材料, 2016, 33(2), 28.
5 Ni N N, Wen Y F, He D L, et al. Journal of Materials Engineering, 2015, 43(6), 90 (in Chinese).
倪楠楠, 温月芳, 贺德龙, 等. 材料工程, 2015, 43(6), 90.
6 Ge T S. Theoretical basis of solid internal friction:grain boundary relaxation and grain boundary structure, Peking University Press, China, 2014, pp. 19(in Chinese).
葛庭燧. 固体内耗理论基础:晶界弛豫与晶界结构, 北京大学出版社, 2014, pp. 19.
7 Zhong G. Study on damping properties of fiber reinforced composite. Master's Thesis, Harbin Engineering University, China, 2016 (in Chinese).
仲耿. 纤维增强复合材料阻尼性能研究. 硕士学位论文, 哈尔滨工程大学, 2016.
8 Yan D D. Structural and damping properties of 3-D braided carbon fibers reinforced epoxy composites. Master's Thesis, Tianjin University, China, 2018 (in Chinese).
闫德道. 三维编织碳纤维增强树脂基复合材料结构-阻尼性能研究. 硕士学位论文, 天津大学, 2018.
9 Chandra R, Singh S P, Gupta K. Composite Structures, 1999, 46(1), 41.
10 He F, Wang M Z. Carbon fiber and its composite materials, Science Press, China, 1997, pp. 175 (in Chinese).
贺福, 王茂章. 碳纤维及其复合材料, 科学出版社, 1997, pp. 175.
11 Gao Y. Study on damping of fibre reinforced resin composites and structures. Master's Thesis, Harbin Institute of Technology, China, 2010 (in Chinese).
高影. 纤维增强树脂基复合材料及其结构的阻尼性能研究. 硕士学位论文, 哈尔滨工业大学, 2010.
12 Li B, Olson E, Perugini A, et al. Polymer, 2011, 52(24), 5606.
13 Katsiropoulos C V, Pappas P, Koutroumanis N, et al. Composites Science and Technology, 2022, 227, 109562.
14 Gong L Y, Zhang F J, Peng X Q, et al. Composites Science and Technology, 2022, 224, 109309.
15 Feng J G, Safaei B, Qin Z Y, et al. Polymer, 2023, 281, 126107.
16 Koratkar B N, Wei B Q, Ajayan P M. Advanced Materials, 2002, 14(13-14), 997.
17 Koratkar N A, Suhr J, Joshi A, et al. Applied Physics Letters, 2005, 87(6), 3102.
18 Rafiee M, Nitzsche F, Labrosse M R. Polymer Testing, 2018, 69, 388.
19 Borbón F, Ambrosini D, Curadelli O. Composites Part B, 2014, 60, 106.
20 Kim H C, Kim E H, Lee I, et al. Journal of Composite Materials, 2013, 47(8), 1045.
21 Rajoria H, Jalili N. Composites Science and Technology, 2005, 65(14), 2079.
22 Farrash S M H, Shariati M, Rezaeepazhand J. Composites Part B, 2017, 122, 1.
23 Avil E, Kadioglu F, Kaynak C. Journal of Reinforced Plastics and Composites, 2020, 39(7-8), 311.
24 Khan S U, Li C Y, Siddiqui N A, et al. Composites Science and Technology, 2011, 71(12), 1486.
25 Kim J J, Brown A D, Bakis C E, et al. Composites Science and Technology, 2021, 207, 108712.
26 DeValve C, Pitchumani R. Carbon, 2013, 63, 71.
27 Brown A D, Bakis C E, Smith E C. Composites Science and Technology, 2023, 231, 109807.
28 Li Y, Cai S M, Huang X L. Composites Science and Technology, 2017, 143, 89.
29 Assarar M, Zouari W, Ayad R, et al. Composites Part B:Engineering, 2018, 152, 248.
30 Kishi H, Kuwata M, Matsuda S, et al. Composites Science and Technology, 2004, 64(16), 2517.
31 Qin T F, Liu J S, Wei X, et al. Materials Research Express, 2022, 9(2), 020006.
32 Zheng C S, Duan F H, Liang S. Composite Structures, 2021, 256, 113099.
33 Zheng C S, Wang S Q, Liang S. Journal of Alloys and Compounds, 2020, 822, 153739.
34 Cai S M, Li Y, Liu H Y, et al. Composites Science and Technology, 2021, 213, 108904.
35 Zhu X R, Li Y, Yu T, et al. Journal of Aeronautical Materials, 2021, 41(6), 68 (in Chinese).
朱雪瑞, 李岩, 于涛, 等. 航空材料学报, 2021, 41(6), 68.
36 Zhu X R, Li Y, Yu T, et al. Composites Communications, 2021, 28, 100940.
37 Lu W J, Qin F X, Wang Y F, et al. ACS Applied Materials & Interfaces, 2019, 11(33), 30278.
38 Lu W J, Qin F X, Zhang Q C, et al. Composites Part A, 2020, 137, 106035.
39 Zou S Q, Zhang C R, Zhou X G, et al. Hi-Tech Fiber and Application, 2003, 28(2), 15 (in Chinese).
邹世钦, 张长瑞, 周新贵, 等. 高科技纤维与应用, 2003, 28(2), 15.
40 Wang W. Study on damping capacity of C/SiC composites. Master's Thesis, Northwestern Polytechnical University, China, 2005 (in Chinese).
王炜. C/SiC复合材料阻尼性能研究. 硕士学位论文, 西北工业大学, 2005.
41 Wang W, Cheng L F, Zhang L T, et al. Journal of Solid Rocket Technology, 2006, 29(6), 455 (in Chinese).
王炜, 成来飞, 张立同, 等. 固体火箭技术, 2006, 29(6), 455.
42 Zhang Q, Cheng L F, Wang W, et al. Materials Science and Enginee-ring A, 2008, 473(1-2), 254.
43 Hou J T, Qiao S R, Lu G F, et al. Journal of Materials Processing Technology, 2009, 209(7), 3555.
44 Shi K W, Yan Y K, Mei H, et al. Journal of Alloys and Compounds, 2021, 859, 157849.
45 Hong Z L, Cheng L F, Zhao C N, et al. Acta Materiae Compositae Sinica, 2013, 30(4), 93 (in Chinese).
洪智亮, 成来飞, 赵春年, 等. 复合材料学报, 2013, 30(4), 93.
46 Zhang Q, Cheng L F, Wang F Y, et al. New Carbon Materials, 2014, 29(6), 522 (in Chinese).
张青, 成来飞, 王芙愿, 等. 新型炭材料, 2014, 29(6), 522.
47 Hong Z L, Cheng L F, Zhang L T, et al. International Journal of Applied Ceramic Technology, 2011, 8(2), 342.
48 Wang F Y, Cheng L F, Liang S H. Vacuum, 2019, 168, 108833.
49 Wang F Y, Cheng L F, Liang S H. Materials Science and Engineering A, 2019, 750, 1.
50 Zhang Q, Cheng L F, Wang W, et al. Materials Science Forum, 2007, 546, 1531.
51 Jia Y, Li K Z, Xue L Z, et al. Composites Part B:Engineering, 2017, 114, 8.
52 Cheng J. Study on fatigue behavior and interface structural evolution of C/C composites. Ph. D. Thesis, Northwestern Polytechnical University, China, 2017 (in Chinese).
程静. C/C复合材料的循环疲劳行为及其界面结构演变. 博士学位论文, 西北工业大学, 2017.
53 Liao X L. The fatigue behaviors and damage evolution of 3D braided C/C composites. Ph. D. Thesis, Northwestern Polytechnical University, China, 2006 (in Chinese).
廖晓玲. 三维编织C/C复合材料的疲劳行为以及损伤演变研究. 博士学位论文, 西北工业大学, 2006.
54 Shu W G. Fiber Composites, 2004(3), 54 (in Chinese).
舒卫国. 纤维复合材料, 2004(3), 54.
55 Chang W C, Tai N H, Ma C C M. Journal of Materials Science, 1995, 30, 1225.
56 Shi R, Li H J, Kang M K, et al. Journal of Materials Engineering, 1999(5), 9 (in Chinese).
石荣, 李贺军, 康沫狂, 等. 材料工程, 1999(5), 9.
57 Wang C, Zhu Z G, Hou X H, et al. Carbon, 2000, 38(13), 1821.
58 Hou X H, Li H J, Shen J, et al. Journal of Materials Engineering, 2000(7), 6 (in Chinese).
侯向辉, 李贺军, 沈健, 等. 材料工程, 2000(7), 6.
59 Shi F, Luo R Y. In:The Ninth China-Japan Joint Conference on Compo-site Materials. Hohhot, China, 2010, pp. 189 (in Chinese).
石峰, 罗瑞盈. 第九届中日复合材料学术会议. 呼和浩特, 2010, pp. 189.
60 Kogo Y, Iijima Y, Igata N, et al. Journal of Alloys and Compounds, 2003, 355(1-2), 148.
61 Kogo Y, Iijima Y, Igata N. Journal of Alloys and Compounds, 2003, 355(1-2), 154.
62 Hou X H, Li H J, Shen J, et al. Materials Science and Engineering A, 2000, 286(2), 250.
63 Hou X H, Li H J, Wang C, et al. Acta Materiae Compositae Sinica, 2001, 18(1), 89 (in Chinese).
侯向辉, 李贺军, 王灿, 等. 复合材料学报, 2001, 18(1), 89.
64 Yang W, Luo R Y, Hou Z H, et al. New Carbon Materials, 2016, 31(2), 159.
65 Cheng J, Li H J, Zhang S Y, et al. Materials Science and Engineering A, 2014, 600, 129.
66 Wang L, Fu Q G, Yu X, et al. Ceramics International, 2019, 45(3), 3803.
67 Liu Y, Fu Q G, Zhao F L, et al. Composites Part B, 2016, 106, 59.
68 Lv Z Z, Liu X, Wang J, et al. Materials Letters, 2023, 334, 133728.
69 Gu J H, Zhang X N, Gu M Y, et al. Materials Letters, 2004, 58(25), 3170.
70 Liu C Y, Tao X K, Sun Y C, et al. Journal of Tianjin Institute of Technology, 2003, 19(1), 62 (in Chinese).
刘长瑛, 陶小克, 孙永昌, 等. 天津理工学院学报, 2003, 19(1), 62.
71 Mu Y L, Yao G C, Zu G Y, et al. Materials and Design, 2010, 31(9), 4423.
72 Zhang H, Si Y M, Liu Q G, et al. Journal of National University of Defense Technology, 1996, 18(3), 54 (in Chinese).
张虹, 斯永敏, 刘庆国, 等. 国防科技大学学报, 1996, 18(3), 54.
73 Ren F Z, Jiang J J, Shi W. Journal of Tongren University, 2016, 18(4), 35 (in Chinese).
任富忠, 姜菁菁, 石维. 铜仁学院学报, 2016, 18(4), 35.
74 Ren F Z, Wu S Z, Shi W. Chinese Journal of Materials Research, 2017, 31(1), 74 (in Chinese).
任富忠, 吴思展, 石维. 材料研究学报, 2017, 31(1), 74.
75 Gu J H, Zhang X N, Gu M Y. Materials Transactions, 2004, 45(5), 1743.
76 Zhao H F, Xia C J, Ma N H, et al. Hot Working Technology, 2007, 36(12), 37 (in Chinese).
赵慧锋, 夏存娟, 马乃恒, 等. 热加工工艺, 2007, 36(12), 37.
77 Dong J J. Modal analysis of three-dimension orthogonal woven carbon/glass fiber hybrid composites. Master's Thesis, Xi'an Polytechnic University, China, 2020 (in Chinese).
董经经. 三向正交机织碳/玻璃纤维混杂复合材料的模态分析. 硕士学位论文, 西安工程大学, 2020.
78 Mao G. Study on damping of two typical structures of carbon fiber composite laminated members. Master's Thesis, Wuhan University of Technology, China, 2020 (in Chinese).
毛戈. 碳纤维复合材料层合构件两类典型结构阻尼研究. 硕士学位论文, 武汉理工大学, 2020.
79 Xu X Q. Analysis and optimization of the vibration response for fiber reinforced composites with laminated structure. Master's Thesis, Nanjing University of Aeronautics and Astronautics, China, 2015 (in Chinese).
胥小强. 纤维增强复合材料层合板振动响应分析与优化. 硕士学位论文, 南京航空航天大学, 2015.
80 Kaliske M, Rothert H. Composites Engineering, 1995, 5(5), 551.
81 Aboudi J. International Journal of Engineering Science, 1982, 20(1), 605.
82 Saravanos D A, Chamis C C. Journal of Composites Technology and Research, 1990, 12(1), 1.
83 Hwang S J, Gibson R F. Composite Engineering, 1993, 3(1), 975.
84 Finegan I C, Gibson R F. Composites Science and Technology, 2000, 60(7), 1077.
85 Kumar P, Chandra R, Singh S P. In:The International Conference on Computational & Experimental Engineering and Sciences. Miami, 2007, pp. 67.
86 Adams R D, Bacon D G C. Journal of Composite Materials, 1973, 7(4), 402.
87 Ni R G, Adams R D. Journal of Composite Materials, 1984, 18(2), 104.
88 Adams R D, Maheri M R. Journal of Alloys and Compounds, 2003, 355, 126.
89 Maheri M R, Adams R D. Journal of Sound and Vibration, 2003, 259(1), 17.
90 Talbot J P, Woodhouse J. Composites Part A, 1997, 28(12), 1007.
91 Guan Y J, Wei Y T. Composite Structures, 2009, 87(3), 225.
92 Wu H P, Hou D Y, Sun L N. Chinese Journal of Applied Mechanics, 2012, 29(1), 65 (in Chinese).
武海鹏, 侯涤洋, 孙立娜. 应用力学学报, 2012, 29(1), 65.
93 Wu H P. Fiber Composites, 2015, 32(1), 26 (in Chinese).
武海鹏. 纤维复合材料, 2015, 32(1), 26.
94 Wu H P. Materials Reports, 2021, 35(Z1), 617 (in Chinese).
武海鹏. 材料导报, 2021, 35(Z1), 617.
95 Qi W K, Cheng B. Journal of Vibration, Measurement & Diagnosis, 2013, 33(6), 1049 (in Chinese).
漆文凯, 程博. 振动, 测试与诊断, 2013, 33(6), 1049.
96 Qin C, Xia M Y, Xu Z B, et al. In:The 12th National Conference on vibration theory and Application. Nanning, China, 2017, pp. 661 (in Chinese).
秦超, 夏明一, 徐振邦, 等. 第十二届全国振动理论及应用学术会议. 南宁, 2017, pp. 661.
97 Huang W J, Rao J, Chen Q M, et al. Fluid Machinery, 2016, 44(10), 37 (in Chinese).
黄文俊, 饶杰, 陈启明, 等. 流体机械, 2016, 44(10), 37.
[1] 张倩玮, 陈意高, 崔红, 吴小军. SiC-ZrC复相超高温陶瓷改性C/C复合材料的研究进展[J]. 材料导报, 2024, 38(3): 22060154-10.
[2] 秦若男, 果春焕, 李艳春, 邵帅齐, 姜风春. 多孔金属材料阻尼性能的研究进展[J]. 材料导报, 2023, 37(15): 21100001-10.
[3] 冯士杰, 宋环君, 陈昊然, 孙娅楠, 杨小健, 张宝鹏, 杨良伟, 刘伟. 反应熔渗工艺制备碳纤维增强陶瓷基复合材料研究进展[J]. 材料导报, 2022, 36(22): 22050068-6.
[4] 范凌云, 高婧, 李锦峰, 周海俊. 层压型CFRP环带疲劳试验中接触面温度场分析[J]. 材料导报, 2022, 36(1): 20110148-7.
[5] 廖明义, 王文恒, 王旭, 张春庆. 无规溶聚苯乙烯/丁二烯橡胶的负离子法合成、微观结构和性能[J]. 材料导报, 2021, 35(z2): 465-469.
[6] 苏毅, 李婷, 李爱群. 极小粒子增强聚氨酯阻尼性能的影响因素分析[J]. 材料导报, 2021, 35(4): 4205-4209.
[7] 马衍轩, 李梦瑶, 朱鹏飞, 徐亚茜, 于霞, 彭帅, 张鹏, 张颖锐, 王金华. 超高性能水泥基复合材料的多尺度设计与抗爆炸性能研究进展[J]. 材料导报, 2021, 35(17): 17190-17198.
[8] 胥晓强, 胥永刚. V元素对Fe-16Cr-2.5Mo合金磁机械阻尼的影响[J]. 材料导报, 2021, 35(14): 14115-14119.
[9] 魏凤春, 李明哲, 张晓, 关春龙. 碳纤维增强砂轮基体的有限元模态分析研究[J]. 材料导报, 2020, 34(Z2): 590-593.
[10] 谢桂华, 孙悦, 严鹏, 刘炀, 翁煜. 湿/热条件下的CFRP筋粘结型锚具性能研究[J]. 材料导报, 2020, 34(22): 22178-22184.
[11] 胡洋, 赵祺, 芦艾, 王志勇, 沈思敏. 苯基硅橡胶泡沫的制备及阻尼性能[J]. 材料导报, 2019, 33(10): 1752-1755.
[12] 刘松, 姚楚, 杨振, 李栋辉, 江学良. 稀土氧化物填充丁基发泡橡胶阻尼性能的研究*[J]. 《材料导报》期刊社, 2017, 31(8): 46-50.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed