RESEARCH PAPER |
|
|
|
|
|
Tribological Properties and Lubricant Mechanisms of SiO2/MoS2 Hybrid Nanolubricants in Magnesium Alloys Cold Rolling |
XIE Hongmei1, JIANG Bin2, PENG Cheng1, PAN Fusheng2
|
1 College of Mechanical and Electrical Engineering, Yangtze Normal University, Chongqing 408100; 2 College of Materials Scienceand Engineering, National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400044 |
|
|
Abstract Currently, there are no suitable lubricants for the cold rolling process of Mg alloy. Occasional, the lubricants used for Al alloy rolling is used or even skip the lubricants. Cold rolling process without lubricants will lead to poor surface quality of pro-ducts and high energy consumption. The application of conventional oil-based lubricant in Al alloy rolling processes relies heavily on sulphur, chlorine and phosphorous-containing additives. These additives cause negative effects on the environment even at low concentrations during the disposal of waste fluids. Based on this, AZ31 Magnesium alloy sheets were processed by cold rolling lubricated with different SiO2/MoS2 mixing ratios hybrid nanolubricants. The cold rolling performance was investigated by measuring rolling force as well as the surface roughness of the sheets. The morphology and composition of surface were characterized by means of field emission scanning electron microscope (FESEM) and X-ray photoelectron spectrum (XPS), and the synergistic lubrication mechanism of SiO2/MoS2 hybrid nanolubricants was discussed. The results indicated that the optimal SiO2/MoS2 mixing ratio in the base oil was 0.25∶0.75. The excellent lubrication properties of the SiO2/MoS2 hybrid nanolubricant effectively reduced the rolling force and improved the surface quality of sheets during cold rolling process, compared with those of pure nanolubricants and neat oil without nanoparticles tested in the same conditions. The synergistic effect in the SiO2/MoS2 combinations may be explained in terms of the micro-cooperation of various nanoparticles with different shapes and lubrication mechanisms.
|
Published: 11 May 2018
|
|
|
|
1 Xu Guofu, Duan Yulu, Qian Jian, et al. Microstructure, mechanical properties and corrosion properties of friction stir welded Al-Zn-Mg-Sc-Zr alloy[J].The Chinese Journal of Nonferrous Metals,2017,27(2):225(in Chinese).
徐国富,段雨露,钱健,等.Al-Mg-Mn-Sc-Zr合金搅拌摩擦焊接头显微组织、力学性能及腐蚀性能[J].中国有色金属学报,2017,27(2):225.
2 Chen Qiaowang, Tang Aitao, Xu Tingyi, et al. High performance cast magnesium rare-earth alloys:Retrospect and prospect[J].Materials Review A:Review papers,2016,30(9):1(in Chinese).
陈巧旺,汤爱涛,许婷熠,等.高性能铸造稀土镁合金的发展[J].材料导报:综述篇,2016,30(9):1.
3 Li Zhenliang, Liu Fei, Yuan Aiping, et al. Effects of rolling defor-mation on texture and LPSO phase of spray-deposited magnesium alloys containing Nd[J].Acta Metallurgica Sinica,2016,52(8):938(in Chinese).
李振亮,刘飞,袁爱萍,等.轧制变形对喷射沉积含Nd镁合金织构及LPSO相的影响[J].金属学报,2016,52(8):938.
4 Huang W J, Du C H, Li Z F, et al. Tribological characteristics of magnesium alloy using N-containing compounds as lubricating additives during sliding[J].Wear,2006,260:140.
5 Huang W J, Fu Y, Wang J, et al. Effect of chemical structure of borates on the tribological characteristics of magnesium alloy during sliding[J].Tribology International,2005,38:775.
6 Xia Y Q, Jia Z F, Jia J H. Advanced tribology[M].Berlin:Springer Berlin Heidelberg,2010.
7 Tang Z L, Li S H. A review of recent developments of friction modifiers for liquid lubricants (2007-present)[J].Current Opinion in Solid State & Materials Science,2014,18:119.
8 Li Z P, Li X F, Zhang Y W, et al. Tribological study of a highly hydrolytically stable phenylboronic acid ester containing benzothiazolyl in mineral oil[J].Applied Surface Science,2014,308:91.
9 Hu Kunhong, Xu Yong, Xu Yufu, et al. Tribological properties of MoS2 lubricants with different morphologies in an ionic liquid[J].Tribology,2015,32(2):167(in Chinese).
胡坤宏,徐勇,徐玉福,等.不同形态的二硫化钼润滑剂在离子液体中的摩擦学性能[J].摩擦学学报,2015,32(2):167.
10 Du Pengfei, Chen Guoxu, Song Shiyuan, et al. Preparation and tribological properties of Ni-doped muscovite composite particles as a lubricant additive for lithium grease[J].Tribology,2017,37(1):19(in Chinese).
杜鹏飞,陈国需,宋世远,等.镍掺杂白云母复合粉体的制备及其作为润滑脂添加剂的摩擦学性能[J].摩擦学学报,2017,37(1):19.
11 Sayuti M, Sarhan A A D, Hamdi M. An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy[J].International Journal of Advanced Manufacturing Technology,2012,67:833.
12 Hu K H, Liu M, Wang Q J, et al. Tribological properties of molybdenum disulfide nanosheets by monolayer restacking process as additive in liquid paraffin[J].Tribology International,2009,42:33.
13 Kogovšek J, Remškar M, Mrzel A, et al. Influence of surface roughness and running-in on the lubrication of steel surfaces with oil containing MoS2 nanotubes in all lubrication regimes[J].Tribology International,2013,61:40.
14 Mosleh M, Atnafu N D, Belk J H, et al. Modification of sheet metal forming fluids with dispersed nanoparticles for improved lubrication[J].Wear,2009,267:1220.
15 Kalin M, Kogovšek J, Kova J, et al. The formation of tribofilms of MoS2 nanotubes on steel and DLC-coated surfaces[J].Tribology Letters,2014,55:381.
16 Xie H M, Jiang B, He J J, et al. Lubrication performance of MoS2 and SiO2 nanoparticles as lubricant additives in magnesium alloy-steel contacts[J].Tribology International,2016,93:63.
17 Johny Tannous F D, Ime` Ne Lahouij, Thierry Le Mogne, et al. Understanding the tribochemical mechanisms of IF-MoS2 nanoparticles under boundary lubrication[J].Tribology Letters,2011,41:55.
18 Hu K H, Huang F, Hu X G, et al. Synergistic effect of nano-MoS2 and anatase nano-TiO2 on the lubrication properties of MoS2/TiO2 nano-clusters[J].Tribology Letters,2011,43:77.
19 Zhang Y B, Li C H, Jia D Z, et al. Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding[J].International Journal of Advanced Manufacturing Technology,2015,99:19.
20 Xu Y F, Peng Y B, Dearn K D, et al. Synergistic lubricating beha-viors of graphene and MoS2 dispersed in esterified bio-oil for steel/steel contact[J].Wear,2015,342-343:297. |
|
|
|