螺纹短收尾表面折叠形成机理及滚压工艺参数仿真

doi:10.11896/cldb.23110280

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (3684KB)
Export: BibTeX | EndNote (RIS)

Abstract The bolts with short end thread are widely used in the aerospace industry due to their advantages of compact structure, light weight, and reliable connection. However, during the processing of bolt, the end area is prone to producing folding defect, which seriously affects the fatigue life of the bolt. Therefore, it is necessary to conduct research on the mechanism of surface folding formation and the influence of process parameters on the short end of threads. Firstly, a numerical simulation model with finite element was established on the thread and its end rolling process, and the forming process of short end folding defects was analyzed. Correspondingly, the folding formation mechanism was revealed. Afterwards, the influence of the effect of the end rolling process on the folding size was explored, and a mathematical regression model was constructed between rolling process parameter and folding size. The rolling process parameters were also optimized. The research results indicate that the surface folding of short end threads mainly occurs in the later stage of bolt processing, which is caused by the extrusion effect of the end rolling wheel on the transition area of the thread end-arc region in bolt. As the processing progresses, the thickness of the transition area becomes smaller and the material undergoes severe deformation, which can further lead to the aggravation of folding defects. Based on the mathematical model between rolling process parameter and folding size, it is indicated that the feed rate impacts most significantly the folding size. And as the folding size increases, the final folding shows a variation tendency of first decreasing and then increasing.

Key words： short end thread folding rolling process numerical simulation

Published: 25 November 2024 Online: 2024-11-22

CLC number:	TG131.3
	TG376.3

Fund:Open Project of Tianjin Key Laboratory of Fastening Technology(TKLF2022-01-B-03).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIN Zhongliang
	ZHANG Zhenfeng
	XU Xueshi
	LI Haonan
	TANG Wei
	BAI Qingshun

Cite this article:

LIN Zhongliang,ZHANG Zhenfeng,XU Xueshi, et al. Simulation of the Mechanism of Folding Formation on the Surface of Short End Thread and Rolling Process Parameters[J]. Materials Reports, 2024, 38(22): 23110280-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.23110280 OR http://www.mater-rep.com/EN/Y2024/V38/I22/23110280

1 Zhao Q Y, Chen S R, Huang H, et al. Heat Treatment of Metals, 2017, 42(10), 203(in Chinese).
赵庆云, 程思锐, 黄宏, 等. 金属热处理, 2017, 42(10), 203.
2 O'brien M, Metcalfe R. Journal of Failure Analysis and Prevention, 2009, 9(2), 171.
3 Mushtaq S, Sheikh N A. IOSR Journal of Mechanical and Civil Engineering, 2013, 7(1), 12.
4 Liu M, Ji Z, Bao L, et al. Materials, 2022, 15(8), 2747.
5 Talu S, Saglam H, Kus R, et al. CIRP Journal of Manufacturing Science and Technology, 2020, 31, 334.
6 Jiang Y, Lyu X B, Wang Z, et al. In: China Aviation Society Youth Science and Technology Forum. Nanchang, 2022, pp.749(in Chinese).
江莹, 吕兴彬, 王智, 等. 第十届中国航空学会青年科技论坛论. 南昌, 2022, pp.749.
7 Zhang D W, Liu B K, Zhao S D. Materials, 2019, 12(10), 1716.
8 Wang Z, Wang F, Chen R F, et al. Oil Field Equipment, 2020, 49(5), 36(in Chinese).
王哲, 万夫, 陈瑞峰, 等. 石油矿场机械, 2020, 49(5), 36.
9 Zhang S, Zhang D, Zhao S, et al. Chinese Journal of Aeronautics, 2023, 36(3), 471.
10 Zhang S, Fan S, Zhao S, Wang Y. In: IOP Conference Series: Materials Science and Engineering. Bristol, 2019, pp.012004.
11 Wang D, Lu X X, Zhao J W, et al. Journal of Mechanical Strength, 2022, 44(5), 1075(in Chinese).
王栋, 鲁新羲, 赵静雯, 等. 机械强度, 2022, 44(5), 1075.
12 Wang K, Zhang X B, Xiao Q, et al. Modern Manufacturing Engineering, 2022(4), 9(in Chinese).
王锴, 张晓斌, 肖琪, 等. 现代制造工程, 2022(4), 9.
13 Furukawa A, Hagiwara M. Mechanical Engineering Journal, 2015, 2(4), 14-00293.
14 Zhang S, Zhang D, Jiang H, et al. Journal of Materials Research and Technology, 2022, 19, 230.
15 Wu T Y, Li X F, Wang W C, et al. Modern Manufacturing Engineering, 2022(11), 153(in Chinese).
吴同一, 黎向锋, 王文超, 等. 现代制造工程, 2022(11), 153.
16 Zhang Y, Hu Z, Guo L. Metals, 2021, 11(3), 503.
17 Giorleo L, Cartapani M. Journal of the Institution of Engineers(India): Series C, 2021, 103, 403.
18 Domblesky J P, Feng F. Journal of Materials Processing Technology, 2002, 121(2-3), 341.
19 Domblesky J P, Feng F. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2002, 216(4), 507.
20 Wang S W, Wen A L, Bing S J, et al. Chinese Journal of Computation Mechanics, 2008, 25(S1), 113(in Chinese).
王生武, 温爱玲, 邴世君, 等. 计算力学学报, 2008, 25(S1), 113.
21 Gong S Y, Wang W J, Xie X L. Mechanical Engineering & Automation, 2019(3), 150(in Chinese).
龚三元, 王文江, 谢小澜. 机械工程与自动化, 2019(3), 150.