焊丝成分对铝-铜异种金属熔钎焊接头钎焊界面组织与接头力学性能的影响*

doi:10.11896/j.issn.1005-023X.2017.010.013

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (1207KB)
Export: BibTeX | EndNote (RIS)

Abstract Dissimilar metals of 1060 aluminum and T2 copper were joined with butt joint by pulsed double electrode gas metal arc welding-brazing. ER1100, ER5356, ER4043 and ER4047 filler wires were used as filler materials, respectively. The effects of composition of filler wires on the mechanical properties, the thickness of intermetallic compound layer and microstructure of joints were studied. The results show that the four welding joints are composed of fusion zone of the aluminum side, the weld zone, brazing zone of the copper side, and brazing zone was divided into two parts, namely, Al-Cu eutectic zone and Al-Cu intermetallic compounds layer zone. Si element in the filler wires is able to discourage the diffusion of Al and Cu atoms, which controls the growth of intermetallic compounds between Al and Cu as well as increase the microhardness and tensile strength of weld seam. While the addition of Mg has no obvious effect.

Key words： dissimilar metals pulsed DE-MIG welding-brazing filler wire intermetallic compounds mechanical property

Published: 08 May 2018

CLC number:

TG401

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	SHI Yu
	ZHOU Xianglong
	ZHU Ming
	GU Yufen
	FAN Ding

Cite this article:

SHI Yu,ZHOU Xianglong,ZHU Ming, et al. Effect of Filler Wires on Brazing Interface Microstructure and Mechanical Properties of Al/Cu Dissimilar Metals Welding-Brazing Joint[J]. Materials Reports, 2017, 31(10): 61-61.

URL:

http://www.mater-rep.com/EN/10.11896/j.issn.1005-023X.2017.010.013 OR http://www.mater-rep.com/EN/Y2017/V31/I10/61

1 Larsson J K. Overview of joining technologies in the automotive industry[J]. Welding Res Abroad,2003,49(6-7):29.
2 Qu W Q, Dong F, Qi Z G, et al. Bounding of dissimilar metal materials[J]. Aerospace Manuf Technol,2006(3):44(in Chinese).
曲文卿, 董峰, 齐志刚, 等. 异种材料的连接[J].航天制造技术,2006(3):44.
3 Dong P, Chen K H, Xiao R S. Mechanical properties of aluminum-copper joint by laser penetration brazing[J]. Chinese J Lasers,2011,38(6):129(in Chinese).
董鹏, 陈凯华, 肖荣诗. 铝-铜异种金属激光深熔钎焊接头力学性能[J].中国激光,2011,38(6):129.
4 Abbasi M, Taheri A K, Salehi M T. Growth rate of intermetallic compounds in Al/Cu bimetal produced by cold roll welding process[J]. J Alloys Compd,2001,319(1):233.
5 Hang C J, Wang C Q, Mayer M, et al. Growth behavior of Cu/Al intermetallic compounds and cracks in copper ball bonds during isothermal aging[J]. Microelectron Reliability,2008,48(3):416.
6 Lee W B, Bang K S, Jung S B. Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing[J]. J Alloys Compd,2005,390(1):212.
7 Feng J, Xue S. Growth behaviors of intermetallic compound layers in Cu/Al joints brazed with Zn-22Al and Zn-22Al-0.05 Ce filler me-tals[J]. Mater Des,2013,51:907.
8 Kraetzsch M, Standfuss J, Klotzbach A, et al. Laser beam welding with high-frequency beam oscillation: Welding of dissimilar materials with brilliant fiber lasers[J]. Phys Procedia,2011,12:142.
9 Zhou L, Li Z Y, Zhao H Y, et al. Microstructure and mechanical properties of Al/brass dissimilar metals TIG welding-brazing joint[J]. Chinese J Nonferrous Metals,2015,25(9):2389(in Chinese).
周利, 李志勇, 赵洪运, 等. 铝/黄铜异种金属TIG熔钎焊接头显微组织与力学性能[J]. 中国有色金属学报,2015,25(9):2389.
10 Shi Y, Wen J X, Huang J K, et al. Study on DE-GMAW MIG-brazing method for bonding steel with aluminum[J]. J Mechan Eng,2011,47(16):25(in Chinese).
石玗, 温俊霞, 黄健康, 等. 基于旁路耦合电弧的铝钢MIG熔钎焊研究[J]. 机械工程学报,2011,47(16):25.
11 Aravind M, Yu P, Yau M Y, et al. Formation of Al2Cu and AlCu intermetallics in Al(Cu) alloy matrix composites by reaction sintering[J]. Mater Sci Eng A,2004,380(1):384.
12 Liu Y B, Sun Q J, Wang H, et al. Effect of the axial external magnetic field on copper/aluminium arc weld joining[J]. Sci Technol Weld Joining,2016,21(6):1.
13 Dong H G, Hu W J, Duan Y P, et al. Effects of Si and Cu additions on properties of dissimilar aluminum-galvanized steel weld[J]. Trans China Welding Institution,2010,31(11):9(in Chinese).
董红刚, 胡文金, 段玉平, 等. Si和Cu元素对铝-镀锌钢GTAW接头性能的影响[J]. 焊接学报,2010,31(11):9.
14 Chang D X, Wang P , Gong X Y, et al. Effect of Si on the compo-site interface microstructure and properties of Cu/Al cold-rolling cladding[J]. Rare Metal Mater Eng,2015,44(9):2216(in Chinese).
常东旭, 王平, 龚潇于, 等. Si对Cu/Al冷轧复合界面组织与力学性能的影响[J]. 稀有金属材料与工程,2015,44(9):2216.
15 Yin F, Zhao M X, Liu Y, et al. Effect of Si on growth kinetics of intermetallic compounds during reaction between solid iron and molten aluminum[J]. Trans Nonferrous Metals Soc China,2013,23(2):556.
16 Uzun O, Karaaslan T, Gogebakan M, et al. Hardness and microstructural characteristics of rapidly solidified Al-8-16 wt.% Si alloys[J]. J Alloys Compd,2004,376(1):149.