| METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
| Effect of Heat Input on Microstructure and Impact Toughness of Thick-walled Component by Submerged Arc Additive Manufacturing |
| WANG Hu1, WU Shaojie1,2, DONG Yilun1, CHENG Fangjie1,2,*
|
1 School of Materials Science and Engineering, Tianjin University, Tianjin 300350, China
2 Tianjin Key Laboratory of Advanced Joining Technology, Tianjin 300350, China |
|
|
|
|
Abstract In this study, the submerged arc additive manufacturing was used to fabricate large thick-walled test parts under different heat inputs, and the influence of heat input on the microstructure and impact toughness was analysed, which provided a theoretical basis for the fabrication of large components in nuclear power, offshore platforms and other fields using the additive manufacturing technology. The results showed that all the deposited metals undergo completely intrinsic heat treatment under low heat input, and the microstructure presented a uniform fine equiaxed crystal morphology. The mean value of Charpy impact energy at -60 ℃ was about 280 J, and the lowest value was more than 200 J. The low temperature impact toughness was excellent. Under high heat inputs, the metals of thas-deposited component failed to undergo completely intrinsic heat treatment, incomplete recrystallization zone appeared in the structure, and a small amount of coarse columnar structures of the original sedimentary state was remained. At -60 ℃, the mean value of Charpy impact energy was below to 100 J, and the lowest value was only 9 J. The dispersion of the value of Charpy impact energy under high heat inputs was large and the impact toughness was unstable. The value of impact energy was related to the microstructure near the notch of the sample. When the notch was just opened in the complete recrystallization zone, the value of the impact energy was very high, forming a typical ductile fracture. When the notch was opened in the incomplete recrystallization zone, the impact energy is very low, as a brittle fracture. In order to ensure excellent low temperature impact toughness, submerged arc additive manufacturing needed appropriate heat input, and too high heat input leaded to incomplete recrystallization between layers, which was the root cause of deterioration of its low temperature toughness.
|
|
Published:
Online: 2024-06-25
|
|
|
| Fund:National Natural Science Foundation of China (52005366) and the Natural Science Foundation of Tianjin (21JCQNJC00570). |
|
|
1 Chen L, He Y, Yang Y, et al. The International Journal of Advanced Manufacturing Technology, 2017, 89(9), 3651.
2 Williams S W, Martina F, Addison A C, et al. Materials Science and Technology, 2016 (32), 641.
3 Guo L X, Li X P, Chen Y, et al. Hot Working Technology, 2023(5), 7(in Chinese).
郭立祥, 李小平, 陈阳, 等. 热加工工艺, 2023(5), 7.
4 Li Y, Wu S, Li H, et al. Additive Manufacturing, 2021, 46, 102124.
5 Boyer H E, Gall T L. Metals handbook; desk edition, United States, 1985.
6 Dou G S, Cao R, Jiang Y, et al. Materials Reports, 2022, 36(S2), 342(in Chinese).
窦贵山, 曹睿, 蒋勇, 等. 材料导报, 2022, 36(S2), 342.
7 Kussmaul K, Schoch F W, Luckow H. Welding Journal, 1983, 62(9), 17.
8 Li Y, Wu S, Li H, et al. Materials Letters, 2021, 283, 128780.
9 Dong Y L, Li Y H, Wu S J, et al. Transactions of Materials and Heat Treatment, 2022, 43(2), 87(in Chinese).
董翼纶, 李宇航, 武少杰, 等. 材料热处理学报, 2022, 43(2), 87.
10 Choi B C, Kim B, Kim B J, et al. Metals, 2021, 11(11), 1839.
11 Timofeev B T, Blumin A A, Anikovsky V V. International Journal of Pressure Vessels and Piping, 1998, 75(13), 945.
12 Eroğlu M, Aksoy M, Orhan N. Materials Science and Engineering:A, 1999, 269(1), 59.
13 Wang X B, Zhang Y B, Xie C S, et al. Heat Treatment of Metals, 2019, 44(4), 141(in Chinese).
王小彬, 张亚斌, 谢常胜, 等. 金属热处理, 2019, 44(4), 141.
14 Morris Jr J W. Science, 2008, 320(5879), 1022.
15 Li Y, Wu S, Lv X, et al. Journal of Manufacturing Processes, 2021, 71, 356. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2024, Vol. 38 
