坡口形状对CLAM钢焊缝抗辐照损伤性能的影响

doi:10.11896/cldb.22100080

Abstract
Figure/Table
References
Related Citation (7)

Download:

Full Text ( PDF ) (13775KB)
Export: BibTeX | EndNote (RIS)

Abstract To investigate the effect of groove shape on theirradiation damage and hardening performance of Chinese low activation martensitic (CLAM) steel welds, scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), grazing incidence X-ray diffraction (GIXRD), and Nano-indentation technology were used to study the irradiation damage and mechanical properties of V-shaped, U-shaped, and double U-shaped CLAM steel welds after irradiation with He⁺ at an energy of 70 keV to a dose of 1×10¹⁷ ions/cm² at room temperature. The results showed that after ion irradiation, defects such as helium bubbles and precipitates were generated in weld metals with different groove shapes, and the degree of reduction in mechanical performance varies. Compared with V-shaped and U-shaped groove welds, double U-shaped groove welds have a more uniform distribution and smaller sizes of internal defects after irradiation. This is because among the three types of welds, the double U-groove weld has a smaller heat input, a relatively smaller grain structure, and a higher grain boun-dary density. The higher density of grain boundaries hinders the mutual aggregation of defects, and reduces the size of defects. After irradiation, the surface roughness of the double U-shaped groove weld is the lowest, the size of helium bubbles and precipitates is the smallest, the diffraction peak offset and broadening rate are the lowest, the surface hardness is the lowest, and the irradiation hardening resistance is the best. This indicates that by controlling the shape of the welding groove and refining the grain structure of the weld, the irradiation damage resistance and irradiation hardening resistance of the weld can be significantly improved.

Key words： CLAM steel welding groove irradiation damage irradiation hardening nano-indentation

Published: 25 May 2024 Online: 2024-05-28

CLC number:

TG442

Fund:National Natural Science Foundation of China (51875264).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	QIAO Yongfeng
	LEI Yucheng
	YAO Yiqiang
	ZHU Qiang

Cite this article:

QIAO Yongfeng,LEI Yucheng,YAO Yiqiang, et al. Effect of Groove Shape on Irradiation Damage Resistance of CLAM Steel Welds[J]. Materials Reports, 2024, 38(10): 22100080-8.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22100080 OR http://www.mater-rep.com/EN/Y2024/V38/I10/22100080

1 Yin S, Yang L, Liu Y, et al. Journal of Nuclear Materials, 2022, 567, 153805.
2 Peng L, Huang Q, Li C, et al. Journal of Nuclear Materials, 2009, 386, 312.
3 Chen X, Huang Y, Madigan B, et al. Fusion Engineering and Design, 2012, 87(9), 1639.
4 Xin Y, Qiu J, Ju X, et al. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2009, 267(18), 3166.
5 Zhu Y, Wan F, Gao J, et al. Science China Physics, Mechanics and Astronomy, 2012, 55(11), 2057.
6 Alamo A, Bertin J L, Shamardin V K, et al. Journal of Nuclear Materials, 2007, 367, 54.
7 Nishiyama Y, Onizawa K, Suzuki M, et al. Acta Materialia, 2008, 56(16), 4510.
8 Konobeev Y V, Dvoriashin A M, Porollo S I, et al. Journal of Nuclear Materials, 2006, 355(1), 124.
9 Pang L, Tai P, Chang H, et al. Journal of Nuclear Materials, 2022, 558, 153357.
10 Xu C, Chen W Y, Chen Y R, et al. Journal of Nuclear Materials, 2018, 509, 644.
11 Rensman J, Van Hoepen J, Bakker J B M, et al. Journal of Nuclear Materials, 2002, 307, 245.
12 Gao J, Song P, Huang Y J, et al. Journal of Nuclear Materials, 2019, 524, 1.
13 Silva C M, Leonard K J, Garrison L M, et al. Materials Science and Engineering: A, 2021, 823, 141780.
14 Egeland G W, Valdez J A, Maloy S A, et al. Journal of Nuclear Materials, 2013, 435(1), 77.
15 Oyoshi K, Hishita S, Wada K, et al. Applied Surface Science, 1996, 100, 374.
16 Huang X C, Feng Y, Dou Y K, et al. Scripta Materialia, 2016, 113, 114.
17 Meric De Bellefon G, Robertson I M, Allen T R, et al. Scripta Materialia, 2019, 159, 123.
18 Bai J, Li J, Fu C, et al. Journal of Nuclear Materials, 2021, 557, 153241.
19 Lam N Q, Okamoto P R, Li M. Journal of Nuclear Materials, 1997, 251, 89.
20 Lemine O M. Superlattices and Microstructures, 2009, 45(6), 576.
21 Bonny G, Konstantinovic M J, Bakaeva A, et al. Acta Materialia, 2020, 198, 1.
22 Liu Z Y, He B, Qu X, et al. Chinese Physics B, 2019, 28(8), 114.
23 Tschopp M A, Horstemeyer M F, Gao F, et al. Scripta Materialia, 2011, 64(9), 908.
24 Li C, Chen J, Liu F, et al. Materials Reports, 2017, 31(S1), 184(in Chinese).
李承亮, 陈骏, 刘飞华, 等. 材料导报, 2017, 31(S1), 184.
25 Mattucci M A, Cherubin I, Changizian P, et al. Acta Materialia, 2021, 207, 116702.
26 Badji R, Chauveau T, Bacroix B. Materials Science and Engineering: A, 2013, 575, 94.
27 Li C, Shu G, Liu W, et al. Annals of Nuclear Energy, 2019, 134, 20.
28 Zhang X, Mei X, Cao X, et al. Journal of Nuclear Materials, 2018, 509, 496.
29 Linga Murty K. Journal of Nuclear Materials, 1999, 270(1), 115.
30 Tanigawa H, Klueh R L, Hashimoto N, et al. Journal of Nuclear Materials, 2009, 386, 231.
31 Xu S, Xiong L, Chen Y, et al. Journal of the Mechanics and Physics of Solids, 2016, 96, 460.
32 Jiang S, Yu C, Zheng P, et al. Journal of Nuclear Materials, 2021, 544, 152712.
33 Tanimoto H, Mizubayashi H, Teramae N, et al. Journal of Alloys and Compounds, 1994, 211, 136.