排气系统用不锈钢在汽车尾气环境下的高温氧化行为

doi:10.11896/cldb.22080197

Abstract
Figure/Table
References
Related Citation (12)

Download:

Full Text ( PDF ) (14292KB)
Export: BibTeX | EndNote (RIS)

Abstract The effect of different times and temperatures on the oxidation efficiency and iron oxide scale morphology of 444 ferritic stainless steel in the atmosphere of synthesis exhaust gas were studied by cyclic oxidation test. The results show that the change of total oxidation weight of stainless steel sample is relatively small at 950 ℃ in the atmosphere of synthesis exhaust gas. The weight gain per unit area of the sample oxidized at 950 ℃ for 100 h is about 85.7% less than that oxidized at 1 050 ℃ for 100 h. The increase in temperature increases the oxidation rate of stainless steel and accelerates the breakaway oxidation process. When the oxidation temperatures are 950 ℃ and 1 050 ℃, the iron oxide scale on the metal surface can be roughly divided into two layers. The surface oxidation products are mainly composed of Fe-Cr spinel and Mn-Cr spinel. The inner layer is primarily Cr₂O₃. There is a silicon oxide enrichment layer at the interface between the iron oxide scale and the substrate, and there are silicon and titanium internal oxides in the substrate near the iron oxide scale. When the oxidation reaction temperature is 1 050 ℃ and the oxidation time is 70 h, oxide nodules are produced on the oxide scale. The oxide nodules’ outer layer is mainly iron oxide, and the inner layer is primarily iron chromium oxide. When stainless steel was oxidized at 1 050 ℃, three kinds of protrusions were observed at the interface between the iron oxide scale and substrate. The protrusions were trapped in the silicon enrichment layer and iron oxide scale and almost disappeared after 100 h of oxidation. The growth of the silicon-enriched layer is related to protrusion formation.

Key words： ferritic stainless steel high temperature oxidation synthetic exhaust gas breakaway oxidation

Published: Online: 2023-12-19

CLC number:

TG172.3

Fund:National Natural Science Foundation of China (51301111),Natural Science Foundation of Liaoning Province of China (2019-KF-05-04),and Shenyang Young and Middle-aged Science and Technology Innovation Talent Support Programme(RC200387).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GAO Shenglun
	SUN Bin
	CHENG Lei
	LIU Zhenyu

Cite this article:

GAO Shenglun,SUN Bin,CHENG Lei, et al. High-temperature Oxidation Behavior of Stainless Steel for Exhaust System Under Automotive Exhaust Environment[J]. Materials Reports, 2023, 37(24): 22080197-7.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22080197 OR http://www.mater-rep.com/EN/Y2023/V37/I24/22080197

1 Wang H, Sun B, Wang J M, et al. Hot Working Technology, 2016, 45(18), 46(in Chinese).
王皓, 孙彬, 王建明, 等. 热加工工艺, 2016, 45(18), 46.
2 Han M F, Yang Z B, Zhao X L, et al. Materials Science and Technology, 2007, 15(4), 534(in Chinese) .
韩敏芳, 杨志宾, 赵晓林, 等. 材料科学与工艺, 2007, 15(4), 534.
3 Liang Y, Long Y Y, Fu G Y. Liaoning Chemical Industry, 2004, 33(5), 263 (in Chinese) .
梁艳, 龙媛媛, 付广艳. 辽宁化工, 2004, 33(5), 263.
4 Saunders S R J, Monteiro M, Rizzo F. Progress in Materials Science, 2008, 53, 775.
5 Acher A, Santacreu P O, Faivre L. High Temperature Technology, 2013, 30(1), 36.
6 Shi C X, Zhong Z Y. Acta Metallurgica Sinica, 2010, 46(11), 8(in Chinese).
师昌绪, 仲增墉. 金属学报, 2010, 46(11), 8.
7 Li D C. Stainless steel strip production technology, Chemical Industry Press, China, 2008 (in Chinese).
李登超. 不锈钢板带材生产技术, 化学工业出版社, 2008.
8 Zhang J M. Investigation on the high temperature oxidation and thermal fatigue behaviors of ferritic stainless steels for exhaust system. Ph. D. Thesis, Shanghai University, China, 2021(in Chinese).
詹建明. 排气系统用铁素体不锈钢的高温氧化和热疲劳行为研究. 博士学位论文, 上海大学, 2021.
9 Zhan J, Li M, Huang J, et al. Metals-Open Access Metallurgy Journal, 2019, 9(2), 129.
10 Juuti T, Rovatti L, Mäkelä A, et al. Journal of Alloys & Compounds, 2014, 616, 250.
11 Chen Y S, Zhan J M, Ni M Z, et al. Corrosion Science and Protection Techniques, 2019, 31(2), 7 (in Chinese) .
陈以生, 詹建明, 倪清钊, 等. 腐蚀科学与防护技术, 2019, 31(2), 7.
12 Dan J Y, Zhou H R, Liu P Y. Journal of Wuhan University of Science and Technology, 2019, 42(1), 9(in Chinese) .
但佳永, 周和荣, 刘鹏洋. 武汉科技大学学报, 2019, 42(1), 9.
13 Promdirek P, Lothongkum G, Chandra-Ambhorn S, et al. Oxidation of Metals, 2014, 81(3-4), 315.
14 Cheng X, Jiang Z, Wei D, et al. Surface & Coatings Technology, 2014, 258, 257.
15 Mikkelsen L, Linderoth S, Bilde-Sørensen J B. In:6th International Symposium on High Temperature Corrosion and Protection of Materials. Les Embiez, 2004, pp. 16.
16 Stott F H, Wood G C, Stringer J. Oxidation of Metals, 1995, 44(1/2), 113.
17 Wouters Y, Bamba G, Galerie A, et al. Materials Science Forum, 2004, 461-464, 83.
18 Wei L, Zheng J, Chen L, et al. Corrosion Science, 2018, 142, 79.
19 Birks N, Meier G H, Pettit F S. Cambridge Univ Pr, 2006, 2013(1), 28.
20 Liu X J. Research on high temperature oxidation behavior and controlling technology and application of oxide scale of hot-rolled non-oriented silicon steel. Ph. D. Thesis, Northeastern University, China, 2014(in Chinese).
刘小江. 热轧无取向硅钢高温氧化行为及其氧化铁皮控制技术的研究与应用. 博士学位论文, 东北大学, 2014.
21 Bauer R, Baccalaro M, Jeurgens L P H, et al. Oxidation of Metals, 2008, 69(3), 265.
22 Fedorova E, Braccini M, Parry V, et al. Corrosion Science, 2015, 103(2016), 145.
23 Li Z F. Evolution mechanism of oxide scale of hot rolled steel and development of acid-free picking technology. Ph. D. Thesis, Northeast University, China, 2018(in Chinese).
李志峰. 热轧钢材氧化铁皮演变机理与免酸洗技术开发. 博士学位论文, 东北大学, 2018.
24 Asteman H, Svensson J E, Norell M, et al. Oxidation of Metals, 2000, 54(1-2), 11.
25 Yu L, Yang C H, Lin S N, et al. Materials Chemistry & Physics, 2008, 112, 566
26 Issartel J, Martoia S, Chariot F, et al. Corrosion Science, 2012, 59, 148.