弹簧应力松弛反常载荷损失及原因分析

doi:10.11896/cldb.22090089

Abstract
Figure/Table
References
Related Citation (0)

Download:

Full Text ( PDF ) (12817KB)
Export: BibTeX | EndNote (RIS)

Abstract It is of great significance to reveal the relationship between spring stress relaxation performance and the microstructure of spring material for the development of new spring materials and the improvement of spring performance. In this work, effects of test temperature and initial load on the load loss and microstructure of the cylindrical helical compression spring were studied by periodic test method. The results show that the coupling effect of temperature and initial load can cause the abnormal load loss-the slight initial load will cause larger load loss at lower temperature than that at higher temperature, after stress relaxation, a strip structure composed of dislocation rich and dislocation poor regions was formed in the spring material. Due to the structural characteristics of materials, and by introducing the concepts of activable dislocation and inactive dislocation, activable stress and inactive stress, the logarithmic equation of stress relaxation is derived, the physical meaning of the equation is clarified, and the abnormal change phenomenon of load is explained. It is considered that the stress relaxation is caused by the movement of activable dislocations since the combined action of activable stress and thermal activation.

Key words： stress relaxation abnormal load loss logarithmic equation strip structure activable dislocation Cottrell atmosphere

Published: 10 December 2023 Online: 2023-12-08

CLC number:

TG142.75

Fund:Chinese National Programs for Science and Technology Development (HDH59020303).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WU Hulin
	LI Zhongsheng
	JIN Yingrong
	HE Yi

Cite this article:

WU Hulin,LI Zhongsheng,JIN Yingrong, et al. Abnormal Load Loss and Cause Analysis of Spring Stress Relaxation[J]. Materials Reports, 2023, 37(23): 22090089-6.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22090089 OR http://www.mater-rep.com/EN/Y2023/V37/I23/22090089

1 Nechache A, Bouzid A H. Journal of Pressure Vessel Technology, 2008, 130, 031211.
2 Zhang Y H, Liu H H, Jiang Y. Machinery Industry Standardization & Quality, 2008(10), 26(in Chinese).
张英会, 刘辉航, 姜膺. 机械工业标准化与质量, 2008(10), 26.
3 Luo J, Xiong W, Li X, et al. Materials Science & Engineering, 2019, A743,755.
4 Peng Heli, Li Xifeng, Chen Xu, et al. Transactions of Nonferrous Metals Society of China, 2020, 30,668.
5 Liu Y, Liu R T. Journal of Heat Treatment of Materials, 2008,29(3),131(in Chinese).
刘勇, 刘瑞堂, 材料热处理学报, 2008, 29(3),131.
6 Nong X, Gao J Z, Wu J W, et al. Metal Heat Treatment, 2022, 47(1),106(in Chinese).
农鑫, 高金忠, 吴俊武, 等. 金属热处理, 2022, 47(1),106.
7 Su D D, Li Y L, Zhang J P. Journal of Heat Treatment of Metals, 1990, 11(3),1(in Chinese).
苏德达, 李忆莲, 张捷平. 金属热处理学报, 1990, 11(3),1.
8 Li J M, Zhao N Q, Li Q Y, et al. Metal Heat Treatment, 2007(5),90(in Chinese).
李建明, 赵乃勤, 李群英, 等. 金属热处理, 2007, 32(5),90.
9 Hariharan K, Jain J. Manufacturing Letters, 2020, 26,64.
10 Jeong C Y, Nam S W, Ginsztler J. Materials Science and Engineering, 1999, A264,188.
11 Varma A, Hariharan K, Jain J, et al. Mechanics of Materials, 2019, 133,138.
12 Lian Y, Wang X, Wang J, et al. Engineering Failure Analysis, 2022, 135,106061.
13 Feng X H. Chinese Science Bulletin, 2012, 57(25),2354(in Chinese).
封先河. 科学通报. 2012, 57(25),2354.
14 Li T. Study on creep and stress relaxation of 0Cr18Ni9 stainless steel spring. Master's Thesis, Harbin Institute of Technology, China, 2014 (in Chinese).
李腾, 0Cr18Ni9不锈钢弹簧蠕变和应力松弛研究, 硕士学位论文, 哈尔滨工业大学, 2014.
15 Wang K, Shi J P, Jin P. Journal of Applied Mechanics, 2021, 38(1), 158(in Chinese).
王柯, 师俊平, 金朋, 应用力学学报, 2021, 38(1),158.
16 Zhao H, Wang T X, Wang M, et al. Chinese Journal of Solid Mechanics, 2014, 35(4),410(in Chinese).
赵华, 王廷喜, 王萌, 等. 固体力学学报, 2014, 35(4),410.
17 Zhou J Q, Zhang X J, Wang J B. Ordnance Material Science and Engineering, 2013, 36(3), 92(in Chinese).
周建强, 张贤杰, 王俊彪. 兵器材料科学与工程, 2013, 36(3), 92.
18 Saadatkiaa S, Mirzadeh H, Cabrer J M. Materials Science & Engineering, 2015, A636,196.
19 Jeong C Y, Nam S W, Ginsztler J. Materials Science and Engineering, 1999, A264,188.
20 Jiang H, Dong J X, Zhang M C, et al. Acta Metallurgica Sinica, 2019, 55(9),1211(in Chinese).
江河, 董建新, 张麦仓, 等. 金属学报, 2019, 55(9),1211.
21 Li Peng, Li Shouxin, Wang Zhongguang, et al. Science China Materials, 2015, 58, 921.
22 Li P, Zhang Z F, Li S X, et al. Scripta Materialia, 2008, 59,730.
23 Wang B S, Sun F Y, Gao Z Y, et al. Acta Metallurgica Sinica, 1997, 33(11),1135(in Chinese).
王勃生, 孙福玉, 高振英, 等. 金属学报, 1997, 33(11),1135.
24 Bonetti, Castellani. Acta Metallurgica Sinica, 1983, 31(10),1689.
25 Ke T S, Rung B T, Wang Y N. Acta Physica Sinica, 1955, 11(1),91(in Chinese).
葛庭燧, 容保粹, 王业宁. 物理学报. 1955, 11(1),91.
26 Sun Yuqing, Peng Lijun, Huang Guojie, et al. Materials Science & Engineering, 2021, A799,140144.