高压扭转变形诱导的非均匀微观结构演化

doi:10.11896/cldb.22050212

Abstract
Figure/Table
References
Related Citation (15)

Download:

Full Text ( PDF ) (11216KB)
Export: BibTeX | EndNote (RIS)

Abstract High-pressure torsion (HPT) can impose a high pressure of a few gigapascal and theoretically unlimited strain to metallic materials. As a result, HPT can effectively refine the grain sizes of metallic materials to ultrafine-grained regime and even nanocrystalline regime. Therefore, HPT is considered one of the most effective methods for processing bulk nanostructured materials. However, owing to the disk-shaped specimen used and the torsional strain imposed by HPT, heterogeneous microstructural evolution is induced in the metallic materials. The microstructural heterogeneity has a direct impact on the mechanical properties of materials. Therefore, in-depth understanding about heterogeneous microstructural evolution induced by HPT is crucial for the future development of HPT related techniques and applications of the materials processed by HPT. In the review, the representative shear strain patterns induced by HPT are reassessed; microscopic heterogeneities and plastic instabilities abound in the microstructural evolution processes are discussed; the concept of strain gradient plasticity has been adopted to explain the heterogeneous microstructural evolution. Finally, we prospect the application and development of HPT related techniques for processing nanostructured and hetero-structured materials.

Key words： severe plastic deformation microstructure deformation mechanism metallic material hetero-structured material nanostructured material

Published: 10 December 2023 Online: 2023-12-08

CLC number:

TG14

Fund:National Natural Science Foundation of China (52071181).

	Service
	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Ziyu
	LIU Yanfang
	LI Yusheng
	CAO Yang

Cite this article:

ZHANG Ziyu,LIU Yanfang,LI Yusheng, et al. Heterogeneous Microstructural Evolution Induced by High-pressure Torsion[J]. Materials Reports, 2023, 37(23): 22050212-10.

URL:

http://www.mater-rep.com/EN/10.11896/cldb.22050212 OR http://www.mater-rep.com/EN/Y2023/V37/I23/22050212

1 Gleiter H. Progress in Materials Science, 1989,33(4),223.
2 Weertman J R. Materials Science and Engineering A, 1993,166(1-2),161.
3 Zhu Y, Ameyama K, Anderson P M, et al. Materials Research Letters, 2021,9(1),1.
4 Ma E, Zhu T. Materials Today, 2017,20(6),323.
5 Valiev R Z, Estrin Y, Horita Z, et al. The Journal of the Minerals, Me-tals & Materials Society (TMS), 2006,58(4),33.
6 Zhu Y T, Liao X Z, Wu X L. Progress in Materials Science, 2012,57(1),1.
7 Cao Y, Ni S, Liao X Z, et al. Materials Science and Engineering, R, Reports, 2018,133,1.
8 Nieman G W, Weertman J R, Siegel R W. Scripta Metallurgica, 1989,23(12),2013.
9 Cui B Z, Han K, Xin Y, et al. Acta Materialia, 2007,55(13),4429.
10 Liao X Z, Kilmametov A R, Valiev R Z, et al. Applied Physics Letters, 2006,88(2),021909.
11 Valiev R Z, Langdon T G. Progress in Materials Science, 2006,51(7),881.
12 Zhilyaev A P, Langdon T G. Progress in Materials Science, 2008,53(6),893.
13 Valiev R Z, Islamgaliev R K, Alexandrov I V. Progress in Materials Science, 2000,45(2),103.
14 Ni S, Liao X Z, Zhu Y T. Acta Metallurgica Sinica, 2014, 50(2), 156 (in Chinese).
倪颂廖晓舟, 朱运田.金属学报, 2014,50(2), 156.
15 Estrin Y, Molotnikov A, Davies C H J, et al. Journal of the Mechanics and Physics of Solids, 2008,56(4),1186.
16 An X H, Wu S D, Wang Z G, et al. Progress in Materials Science, 2019,101,1.
17 Meyers M A, Mishra A, Benson D J. Progress in Materials Science, 2006,51(4),427.
18 Ovid'ko I A, Valiev R Z, Zhu Y T. Progress in Materials Science, 2018,94,462.
19 Edalati K, Matsuda J, Iwaoka H, et al. International Journal of Hydrogen Energy, 2013,38(11),4622.
20 Jamalian M, Hamid M, De Vincentis N, et al. Materials Science and Engineering A, 2019,756,142.
21 Yilmazer H, Niinomi M, Nakai M, et al. Journal of the Mechanical Behavior of Biomedical Materials, 2012,10,235.
22 Yoshida S, Ikeuchi T, Bhattacharjee T, et al. Acta Materialia, 2019,171,201.
23 Schuh B, Mendez-Martin F, Volker B, et al. Acta Materialia, 2015,96,258.
24 Yoshida S, Bhattacharjee T, Bai Y, et al. Scripta Materialia, 2017,134,33.
25 Sathiyamoorthi P, Moon J, Bae J W, et al. Scripta Materialia, 2019,163,152.
26 Edalati K, Horita Z, Langdon T G. Scripta Materialia, 2009,60(1),9.
27 Jiang W, Zhou H, Cao Y, et al. Advanced Engineering Materials, 2020,22(1),1900477.
28 Cao Y, Wang Y B, Figueiredo R B, et al. Acta Materialia, 2011,59(10),3903.
29 Cao Y, Wang Y B, Alhajeri S N, et al. Journal of Materials Science, 2010,45(3),765.
30 Figueiredo R B, de Faria G C V, Cetlin P R, et al. Journal of Materials Science, 2013,48(13),4524.
31 Zhang P, Li S X, Zhang Z F. Materials Science and Engineering A, 2011,529,62.
32 Zhang H W, Huang X, Hansen N. Acta Materialia, 2008,56(19),5451.
33 Jiang W, Yuan S, Cao Y, et al. Acta Materialia, 2021,213,116982.
34 Zhilyaev A P, Nurislamova G V, Kim B K, et al. Acta Materialia, 2003,51(3),753.
35 Cao Y, Kawasaki M, Wang Y B, et al. Journal of Materials Science, 2010,45(17),4545.
36 Tian Y Z, An X H, Wu S D, et al. Scripta Materialia, 2010,63(1),65.
37 Pouryazdan M, Kaus B J P, Rack A, et al. Nature Communications, 2017,8(1),1611.
38 Cao Y, Wang Y B, An X H, et al. Acta Materialia, 2014,63,16.
39 Huang Y, Kawasaki M, Langdon T G. Journal of Materials Science, 2013,48(13),4533.
40 Huang Y, Kawasaki M, Langdon T G. Advanced Engineering Materials, 2013,15(8),747.
41 Tian Y Z, Wu S D, Zhang Z F, et al. Acta Materialia, 2011,59(7),2783.
42 Christian J W, Mahajan S. Progress in Materials Science, 1995,39(1-2),1.
43 Huang Z, Cao Y, Nie J, et al. Materials, 2018,11(3),366.
44 Ashby M F. Philosophical Magazine, 1970,21(170),399.
45 Valiev R Z, Estrin Y, Horita Z, et al. Materials Research Letters, 2016,4(1),1.
46 Wang Y B, Ho J C, Liao X Z, et al. Applied Physics Letters, 2009,94(1),011908.
47 Ke M, Hackney S A, Milligan W W, et al. Nanostructured Materials, 1995,5(6),689.
48 Wang Y B, Ho J C, Cao Y, et al. Applied Physics Letters, 2009,94(9),091911.
49 Shan Z, Stach E A, Wiezorek J M K, et al. Science, 2004,305(5684),654.
50 Yamakov V, Wolf D, Phillpot S R, et al. Nature Materials, 2002,1(1),45.
51 Korznikova E A, Mironov S Y, Korznikov A V, et al. Materials Science and Engineering, A, 2012,556,437.
52 Naghdy S, Kestens L, Hertelé S, et al. Materials Characterization, 2016,120,285.
53 Li X, Wei Y, Yang W, et al. Proceedings of the National Academy of Sciences, 2009,106(38),16108.
54 Galindo-Nava E I, Rivera-Díaz-del-Castillo P E J. Acta Materialia, 2012,60(11),4370.
55 Cao Y, Wang Y B, Liao X Z, et al. Applied Physics Letters, 2012,101(23),231903.
56 Hodge A M, Furnish T A, Shute C J, et al. Scripta Materialia, 2012,66(11),872.
57 Huang Q, Yu D, Xu B, et al. Nature, 2014,510(7504),250.
58 Lu L, Chen X, Huang X, et al. Science, 2009,323(5914),607.
59 Cao Y, Wang Y B, Chen Z B, et al. Materials Science and Engineering, A, 2013,578(0),110.
60 Armstrong R W, Zerilli F J. Mechanics of Materials, 1994,17(2),319.
61 Wang Y B, Li B Q, Sui M L, et al. Applied Physics Letters, 2008,92(1),011903.
62 Rupert T J, Gianola D S, Gan Y, et al. Science, 2009,326(5960),1686.
63 Sabirov I, Estrin Y, Barnett M R, et al. Acta Materialia, 2008,56(10),2223.
64 Upmanyu M, Srolovitz D J, Lobkovsky A E, et al. Acta Materialia, 2006,54(7),1707.
65 Sauvage X, Wilde G, Divinski S V, et al. Materials Science and Engineering A, 2012,540,1.
66 Wang L, Teng J, Liu P, et al. Nature Communications, 2014,5,4402.
67 Liu Y, Wang F, Cao Y, et al. Scripta Materialia, 2019,162,316.
68 Hu J, Shi Y N, Sauvage X, et al. Science, 2017,355(6331),1292.
69 Ni S, Wang Y B, Liao X Z, et al. Materials Science and Engineering A, 2011,528(13-14),4807.
70 Gao H, Huang Y, Nix W D, et al. Journal of the Mechanics and Physics of Solids, 1999,47(6),1239.
71 Jakobsen B, Poulsen H F, Lienert U, et al. Science, 2006,312(5775),889.
72 Mohamed F A, Dheda S S. Materials Science and Engineering A, 2012,558,59.
73 Vorhauer A, Pippan R. Scripta Materialia, 2004,51(9),921.
74 Yoo M H, Agnew S R, Morris J R, et al. Materials Science and Enginee-ring, A, 2001,319-321,87.
75 Zhu Y T, Wu X L. Materials Research Letters, 2019,7(10),393.
76 Park H K, Ameyama K, Yoo J, et al. Materials Research Letters, 2018,6(5),261.
77 Cong Z H, Jia N, Sun X, et al. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2009,40A(6),1383.
78 Wang Y B, Louie M, Cao Y, et al. Scripta Materialia, 2010,62(4),214.
79 Šedá P, Ostapovets A, Jäger A, et al. Philosophical Magazine, 2012,92(10),1223.
80 Bonarski B J, Schafler E, Mingler B, et al. Journal of Materials Science, 2008,43(23),7513.
81 Sauvage X, Genevois C, Da Costa G, et al. Scripta Materialia, 2009,61(6),660.
82 Mine Y, Tachibana K, Horita Z. Metallurgical and Materials Transactions A, 2010,41(12),3110.
83 Tavares S S M, Gunderov D, Stolyarov V, et al. Materials Science and Engineering, A, 2003,358(1),32.
84 Cepeda-Jimenez C M, Garcia-Infanta J M, Zhilyaev A P, et al. Journal of Alloys and Compounds, 2011,509(3),636.
85 Mazilkin A A, Straumal B B, Rabkin E, et al. Acta Materialia, 2006,54(15),3933.
86 Mazilkin A A, Abrosimova G E, Protasova S G, et al. Journal of Mate-rials Science, 2011,46(12),4336.
87 Revesz A, Schafler E, Kovacs Z. Applied Physics Letters, 2008,92(1),011910.
88 Wang Y B, Zhao Y H, Lian Q, et al. Scripta Materialia, 2010,63(6),613.
89 Pérez-Prado M T, Zhilyaev A P. Physical Review Letters, 2009,102(17),175504.
90 Figueiredo R B, Sicupira F L, Malheiros L R C, et al. Materials Science and Engineering, A, 2015,625,114.
91 Johnson P C, Stein B A, Davis R S. Journal of Applied Physics, 1962,33(2),557.
92 Giles P M, Marder A R. Metallurgical Transactions, 1971,2(5),1371.
93 Liu Y, Cao Y, Mao Q, et al. Acta Materialia, 2020,189,129.
94 Wu X L, Yang M X, Yuan F P, et al. Proceedings of the National Academy of Sciences of the United States of America, 2015,112(47),14501.
95 Lu K. Science, 2014,345(6203),1455.
96 Wu X, Jiang P, Chen L, et al. Proceedings of the National Academy of Sciences, 2014,111(20),7197.
97 Lin K, Li Z, Liu Y, et al. Scripta Materialia, 2022,209,114390.
98 Kawasaki M, Langdon T G. Journal of Materials Science, 2016,51(1),19.
99 Naderi M, Peterlechner M, Divinski S V, et al. Materials Science and Engineering A, 2017,708,171.
100 Hegedus Z, Gubicza J, Szommer P, et al. Journal of Materials Science, 2013,48(21),7384.
101 Ikoma Y, Hayano K, Edalati K, et al. Applied Physics Letters, 2012,101(12),121908.
102 Akrami S, Watanabe M, Ling T H, et al. Applied Catalysis B, Environmental, 2021,298,120566.
103 Wang Q, Watanabe M, Edalati K. The Journal of Physical Chemistry C, 2020,124(25),13930.
104 Lachinov A N, Alexandrov I V, Shishlov N M, et al. Solid State Phenomena, 2003,94,339.
105 Larsen H A, Drickamer H G. The Journal of Physical Chemistry, 1957,61(9),1249.
106 Beloshenko V A, Varyukhin V N, Voznyak A V, et al. Doklady Physical Chemistry, 2009,426(1),81.
107 Vozniak I, Beloshenko V, Savchenko B, et al. Journal of Applied Polymer Science, 2021,138(4),49720.
108 Beloshenko V, Voznyak Y, Voznyak A, et al. Composites Part B: Engineering, 2017,112,22.
109 Sauvage X, Malandain J J, Hohenwarter A. In: 4th International Confe-rence on Nanomaterials by Severe Plastic Deformation. Goslar, Germany, 2008, pp.584.