| METALS AND METAL MATRIX COMPOSITES |
|
|
|
|
|
| Research Status and Development Trend of 5xxx Series Aluminum Alloys |
| FANG Hongjie1,2, LIU Hui1,2, SUN Jie1,2, ZHANG Qian1,2, YU Kun1,2,*
|
1 College of Engineering, Yantai Nanshan University, Yantai 265713, Shandong, China
2 School of Materials Science and Engineering, Central South University, Changsha 410083, China |
|
|
|
|
Abstract 5××× series aluminum alloy is also known as anti-rust aluminum because of its high corrosion resistance, and it is one of the important mate-rials for marine equipment engineering. With the rapid development of marine industry and the complexity of marine environment, people have put forward higher requirements for the performance of materials used in marine engineering equipment, so 5xxx series aluminum alloy materials not only ensure light weight and high strength, but also further improve the corrosion resistance. In this paper, the content range of main addition alloying elements in 5xxx series aluminum alloy was reviewed, the effect of microalloying elements on the microstructure and properties of 5xxx series aluminum alloys were discussed, the preparation and heat treatment process of 5xxx series aluminum alloy were analyzed, and the development trend of co-regulation, microstructure refinement and performance improvement of hot deformation process and heat treatment process for 5xxx series aluminum alloy were clarified. Finally, the microalloying, heat treatment process, hot deformation behavior and corrosion resistance of 5xxx series aluminum alloys were prospected.
|
|
Published: 10 November 2023
Online: 2023-11-10
|
|
|
| Fund:Natural Science Foundation of Shandong Province of China(ZR2020QE017,ZR2020KE012) and Yantai City School-Land Integration Development Project(2020XDRHXMXK08). |
|
|
1 Burger G, Gupta A, Jeffrey P, et al. Materials Characterization, 1995, 35(1), 23.
2 Guo Cheng, Li Baomian, Zhang Haitao, et al. Chinese Journal of Rare Metals, 2018, 42(8), 878 (in Chinese).
郭成, 李宝绵, 张海涛, 等. 稀有金属, 2018, 42(8), 878.
3 Chen Jiuan. Effect of heat treatment on microstructure and properties of Er5052 aluminum alloy. Master's Thesis, South West University, China, 2016(in Chinese).
陈久安. 热处理对Er 5052铝合金组织与性能的影响. 硕士学位论文, 西南大学, 2016.
4 Li Niankui. Light Metals, 1994(7), 50(in Chinese).
李念奎. 轻金属, 1994(7), 50.
5 Li Shenlan, Huang Zhiqi, Jiang Fuli, et al. Transactions of Materials and Heat Treatment, 2013, 34(5), 131 (in Chinese).
李慎兰, 黄志其, 蒋福利, 等. 材料热处理学报, 2013, 34(5), 131.
6 Wang Xinyu, Xu Chun, Li Yu, et al. Materials Reports, 2020, 34(24), 7 (in Chinese).
王昕宇, 徐春, 黎雨等. 材料导报, 2020, 34(24), 7.
7 Feng Yan, Wang Richu, Peng Chaoqun. Magnesium alloy and aluminum alloy anode materials, Central South University Press, China, 2015, pp. 31 (in Chinese).
冯艳, 王日初, 彭超群. 镁合金与铝合金阳极材料, 中南大学出版社, 2015, pp. 31.
8 Zhao Hai, Ji Meng, Wang Guangdong, et al. Light Alloy Fabrication Technology, 2018, 46(5), 18 (in Chinese).
赵海, 吉猛, 王光东, 等. 轻合金加工技术, 2018, 46(5), 18.
9 Gorelik S. Recrystallization in metals and alloys, MIR Press, Russia, 1981, pp. 152.
10 Gao Jiacheng, Zhang Yanke, Li Ning, et al. Journal of Chongqing University,2013(9), 113(in Chinese).
高家诚, 张延可, 李宁, 等. 重庆大学学报, 2013(9), 113
11 Liu Chuming. Aluminum alloy phase atlas, Central South University Press, China, 2014, pp. 12(in Chinese).
刘楚明. 铝合金相图集, 中南大学出版社, 2014, pp. 12.
12 Luo X, Fang H, Liu H, et al. Materials Transactions, 2019, 60(5), 737.
13 Peng Yemi, Huang Hui, Wang Yan, et al. Science Technology and Engineering, 2011, 11(19), 4436(in Chinese).
彭业密, 黄晖, 王燕, 等. 科学技术与工程, 2011, 11(19), 4436.
14 Lathabai S, Lloyd P. Acta Materialia, 2002, 50(17), 4275.
15 Xu G, Qian J, Xiao D, et al. Journal of Materials Engineering & Performance, 2016, 25(4), 1249.
16 Peng Y, Shu L, Ying D, et al. Materials Science & Engineering A, 2016, 666(1), 61.
17 Song M, Du K, Huang Z, et al. Acta Materialia, 2014, 81(12), 409.
18 Min B, Kim H, Kang S. Journal of Materials Processing Technology, 2005, 162, 355.
19 Qi Zhongyuan. Effect of Er on microstructure and properties of 5A01 aluminum alloy. Master's Thesis, Harbin Engineering University, China, 2017(in Chinese).
齐忠原. Er对5A01铝合金组织和性能的影响. 硕士学位论文, 哈尔滨工程大学, 2017.
20 Liu Guanghua. Rare earth materials and application technology, Chemical Industry Press, China, 2005, pp. 150(in Chinese).
刘光华. 稀土材料与应用技术, 化学工业出版社, 2005, pp. 150.
21 Chen Zhiguo, Yang Wenling, Wangshiyong, et al. Rare Metal Materials and Engineering, 2010, 39(8), 1499(in Chinese).
陈志国, 杨文玲, 王诗勇等. 稀有金属材料与工程, 2010, 39(8), 1499.
22 Royset J, Ryum N. Scripta Materialia, 2005, 52(12), 1275.
23 Tatsuo S. Materials Science Forum. Trans Tech Publications, 2000, 331-337, 85.
24 Zhao Qisong. Effect of grain refinement on microstructure and properties of ZA4-1 alloy. Master's Thesis, Kunming University of Science and Technology, China, 2013(in Chinese).
赵启淞. 晶粒细化对ZA4-1合金组织和性能的影响. 硕士学位论文, 昆明理工大学, 2013.
25 Liu Zhengjun, Zhao Dongning, Hao Xuefeng, et al. Foundry, 2008(7), 57(in Chinese).
刘政军, 赵东宁, 郝雪枫, 等. 铸造, 2008(7), 57.
26 Huang Gaoren, Sun Yimeng, Zhang Li, et al. Journal of Materials Engineering, 2018, 46(9), 112(in Chinese).
黄高仁, 孙乙萌, 张利, 等. 材料工程, 2018, 46(9), 112.
27 Cui Zhongqi, Wu Rengeng. Acta Metallurgica Sinica, 1984(6), 61(in Chinese).
崔忠圻, 吴忍畊. 金属学报, 1984(6), 61.
28 Wen Jian, Zhou Chengen. Journal of Inner Mongolia University of Technology(Natural Science Edition), 1996(4), 1(in Chinese).
文健, 周承恩. 内蒙古工业大学学报(自然科学版), 1996(4), 1.
29 Zhang Xiumei. Journal of Inner Mongolia University of Science and Technology, 2000, 19(2), 244(in Chinese).
张秀梅. 包头钢铁学院学报, 2000, 19(2), 244.
30 Min S, Wu Z, He Y. Materials Science & Engineering A, 2008, 497(2), 519.
31 Wu Zhenggang, Song Ming, He Yuehui. Chinese Journal of Rare Metals, 2009, 33(5), 616(in Chinese).
吴正刚, 宋旼, 贺跃辉. 稀有金属, 2009, 33(5), 616.
32 Fang Huachan, Chao Hong, Chen Kanghua, et al. Chinese Journal of Rare Metals, 2015(8), 686(in Chinese).
方华婵, 巢宏, 陈康华, 等. 稀有金属, 2015(8), 686.
33 Yin Zhimin. Scandium and scandium alloys, Central South University Press, China, 2007, pp. 3(in Chinese).
尹志民. 钪和含钪合金, 中南大学出版社, 2007, pp. 3.
34 Yin Z, Pan Q, Zhang Y, et al. Materials Science & Engineering A, 2000, 280(1), 151.
35 Chen Qin, Pan Qinglin, Wang Ying, et al. The Chinese Journal of Nonferrous Metals, 2012, 22(6), 1555(in Chinese).
陈琴, 潘清林, 王迎, 等. 中国有色金属学报, 2012, 22(6), 1555.
36 Wang Guojun, Lu Liying, Cong Fuguan. 2019 China Aluminum Processing Industry Annual Conference and China (Zouping) Aluminum Processing Industry Development Summit Forum Proceedings, 2019(in Chinese).
王国军, 路丽英, 丛福官. 2019年中国铝加工产业年度大会暨中国(邹平)铝加工产业发展高峰论坛论文集, 2019.
37 Fujikawa S, Sugaya M, Takei H, et al. Journal of the Less Common Metals, 1979, 63(1), 87.
38 Pan Haicheng. Electronic theory study on the metamorphic effect of scandium zirconium complex on Al ferroalloy. Master's Thesis, Shenyang University of Technology, China, 2013(in Chinese).
潘海成. 微量钪锆复合对铝铁合金变质作用的电子理论研究. 硕士学位论文, 沈阳工业大学, 2013.
39 Milman Y, Sirko A, Lotsko D, et al. Trans Tech Publications, 2002, pp. 1217.
40 Guo Feifei. Non-ferrous metals and rare earth applications, 2011(3), 24(in Chinese).
郭菲菲. 有色金属与稀土应用, 2011(3), 24.
41 Tao Huijin, Li Shaotang, Liu Jili, et al. Materials Science and Enginee-ring of Powder Metallurgy, 2008, 13(5), 249(in Chinese).
陶辉锦, 李绍唐, 刘记立, 等. 粉末冶金材料科学与工程, 2008, 13(5), 249.
42 Zhao Zhihao, Wang Gaosong, Zhang Yihang, et al. Journal of Northeas-tern University(Natural Science), 2011, 32(11), 1574(in Chinese).
赵志浩, 王高松, 张翼航, 等. 东北大学学报(自然科学版), 2011, 32(11), 1574.
43 Zeng Fanhao, Xia Changqing, Gu Yi. Materials Reports, 2002, 16(6), 16(in Chinese).
曾凡浩, 夏长清, 古一. 材料导报, 2002, 16(6), 16.
44 Sinyavskii V, Val'Kov V, Titkova E V. Protection of Metals, 1998, 34(6), 549.
45 Vyazovikina N. Protection of Metals, 1999, 35(5), 448.
46 Kharina G, Kuznetsov M, Kochergin V. Russian Journal of Electrochemistry, 1998, 34(5), 482.
47 Ganiev I. Protection of Metals, 1995, 31(6), 543.
48 Ahmad Z, Hamid A, Abdul B. Corrosion Science, 2001, 43(7), 1227.
49 Sun F, Nash G, Li Q, et al. Journal of Materials Science & Technology, 2017, 33(9), 1022.
50 Torma T, Kovács E, Vitális L, et al. Materials Science Forum, 1987, 13-14(1A), 497.
51 Neubert V, Smola B, Stulíková I, et al. Materials Science & Engineering A, 2007, 464(1-2), 358.
52 Ying D, Rui Y, Xu G, et al. Corrosion Science, 2015, 90(2), 359.
53 Huang X, Pan Q, et al. Journal of Alloys & Compounds, 2015, 650(11), 805.
54 Bo L, Pan Q, Chen C, et al. Transactions of Nonferrous Metals Society of China, 2016, 26(9), 2263.
55 Pan Qinglin, Yin Zhimin, Zhang Chuanfu. Journal of Aeronautical Materials, 2002(1), 6(in Chinese).
潘清林, 尹志民, 张传福. 航空材料学报, 2002(1), 6.
56 Liu Z, Li Z, Wang M, et al. Materials Science & Engineering A, 2008, 483(7), 120.
57 Ryum N. Acta Metallurgica, 1969, 17(3), 269.
58 Guo Zhanying, Cong Fuguan, Zhao Gang, et al. Light Alloy Fabrication Technology, 2016, 44 (2), 21(in Chinese).
郭占英, 丛福官, 赵刚, 等. 轻合金加工技术, 2016, 44 (2), 21.
59 Shi C, Chen X. Materials Science & Engineering A, 2014, 596(2), 183.
60 Bai Sijun. Effect of Zr content on microstructure properties of industrial pure aluminum. Master's Thesis, Northeastern University, China, 2015(in Chinese).
白嗣俊. Zr含量对工业纯铝组织性能的影响. 硕士学位论文, 东北大学, 2015.
61 Zhao Jing. Effect of trace elements Er and Zr on microstructure and pro-perties of Zinc-aluminum alloy. Master's Thesis, Shenyang University of Technology, China, 2012(in Chinese).
赵静. 微量元素Er和Zr复合合金化对锌铝合金组织及性能的影响. 硕士学位论文, 沈阳工业大学, 2012.
62 Li J, Oberdorfer B, Wurster S, et al. Journal of Materials Science, 2014, 49(17), 5961.
63 Conserva M, Russo E, Caloni O. Metallurgical Transactions, 1971, 2(4), 1227.
64 Ji Peng. Study on microstructure and properties of friction stir welding joint of Al-Mg-Mn-Zr-Er alloy. Master's Thesis, Harbin Engineering University, China, 2019(in Chinese).
吉朋. Al-Mg-Mn-Zr-Er合金搅拌摩擦焊接头组织与性能的研究. 硕士学位论文, 哈尔滨工程大学, 2019.
65 Che H, Jiang X, Qiao N, et al. Journal of Alloys and Compounds, 2017, 708(7), 662.
66 Motta A. Journal of the Minerals, Metals & Materials Society, 2011, 63(8), 59.
67 Shi Xia. Study on the development and properties of cast aluminum alloy with high strength and high conductivity. Master's Thesis, Wuhan University of Technology, China, 2010(in Chinese).
史霞. 高强度高电导率铸造铝合金的研制与性能研究. 硕士学位论文, 武汉理工大学, 2010.
68 Chen Xianming, Pan Qinglin, Fan Yingying. Ordnance Material Science and Engineering, 2021, 49(1), 18(in Chinese).
陈显明, 潘清林, 范莹莹. 兵器材料科学与工程, 2021, 49(1), 18.
69 Li Ming, Li Heng, Xu Yuanyi, et al. Transactions of Materials and Heat Treatment, 2019, 40 (10), 148(in Chinese).
李明, 李亨, 徐圆义, 等. 材料热处理学报, 2019, 40 (10), 148.
70 Feng Lei, Li Jianguo, Mao Yizhe. Rare Metal Materials and Engineering, 2019, 48 (9), 133(in Chinese).
封蕾, 李建国, 毛轶哲. 稀有金属材料与工程, 2019, 48 (9), 133.
71 Zhuang Pengcheng, Zhang Zhuang, Du Xiaodong. Nonferrous Metals Processing, 2020, 49(2), 7(in Chinese).
庄鹏程, 张壮, 杜晓东. 有色金属加工, 2020, 49(2), 7.
72 Li J, Oberdorfer B, Wurster S, et al. Journal of Materials Science, 2014, 49(17), 5961.
73 Li Gen. Effect of Sc and Zr microalloying on microstructure and properties of novel Al-Zn-Mg-Sc-Zr alloys. Master's Thesis, Tianjin University, China, 2014(in Chinese).
李根. Sc与Zr微合金化对新型Al-Zn-Mg-Sc-Zr合金组织与性能的影响. 硕士学位论文, 天津大学, 2014.
74 Xin Dafu. Contemporary aluminum foil production technology and equipment, Metallurgical Industry Press, China, 2013, pp. 41(in Chinese).
辛达夫. 当代铝箔生产工艺及装备, 冶金工业出版社, 2013, pp. 41.
75 Li Wangzhen, Sun Youping, He Jiangmei, et al. Special Casting & Nonferrous Alloys, 2019, 39 (9), 99(in Chinese).
李旺珍, 孙有平, 何江美, 等. 特种铸造及有色合金, 2019, 39 (9), 99.
76 Li Niankui, Ling Gao, Nie Bo, et al. Aluminum alloy materials and heat treatment technology, Metallurgical Industry Press, China, 2012, pp. 122(in Chinese).
李念奎, 凌杲, 聂波, 等. 铝合金材料及其热处理技术, 冶金工业出版社, 2012, pp. 122.
77 Wang Chuan, Li Defu. Materials Reports, 2019, 33(8), 6(in Chinese).
王川, 李德富. 材料导报, 2019, 33(8), 6.
78 Sun Z, Yin J, Yang H. Advanced Materials Research, 2013, 699(3), 851.
79 Ma P, Zhang D, Zhuang L, et al. Journal of Materials Science and Engineering, 2014, 32(6), 792.
80 王军, 李伟, 伍彬. 中国专利, CN 104404411A, 2015.
81 Li Jianfei. Study on deformation heat treatment technology of heat-resis-tant aluminum alloy with high conductivity. Master's Thesis, Beijing University of Technology, China, 2016(in Chinese).
李健飞. 高导电率耐热铝合金形变热处理工艺研究. 硕士学位论文, 北京工业大学, 2016.
82 Huang Y, Li Y, Xiao Z, et al. Journal of Alloys and Compounds, 2016, 673 (7), 73.
83 Radeti T, Popovi M, Romhanji E. Materials Characterization, 2012, 65(1), 16.
84 He L, Li X, Liu X, et al. Materials Science & Engineering A, 2010, 527(30), 7510.
85 Zhang C, Jiang Y, Cao F, et al. Journal of Materials Science and Technology, 2019, 35(5), 930.
86 Han Shuai. Nonferrous Metals Processing, 2016, 45(2), 29(in Chinese).
韩帅. 有色金属加工, 2016, 45(2), 29.
87 Meng Fanlin, Zhou Chong. Light Alloy Fabrication Technology, 2015, 43(10), 35(in Chinese).
孟凡林, 周崇. 轻合金加工技术, 2015, 43(10), 35.
88 Su Meihua, Wen Shengping, Liu Yong, et al. Hot Working Technology, 2019, 48 (20), 137(in Chinese).
苏美华, 文胜平, 刘勇, 等. 热加工工艺, 2019, 48 (20), 137.
89 Guo Qi, Xu Guofu, Huang Jiwu, et al. Chinese Journal of Rare Metals, 2019(3), 255(in Chinese).
郭琦, 徐国富, 黄继武, 等. 稀有金属, 2019(3), 255.
90 Yi G, Cullen D, Littrell K, et al. Metallurgical and Materials Transactions A, 2017, 48(4), 2040.
91 Cui H, Zhang D, Meng C, et al. Journal of Alloys and Compounds, 2014, 617(8), 925.
92 Meng C, Zhang D, Zhuang L, et al. Journal of Alloys and Compounds, 2016, 655, 178.
93 Unocic K, Mills M, Daehn G, et al. Microscopy & Microanalysis, 2005, 11(S2), 700.
94 Tuan N, Alves A, Toptan F, et al. Materials and Corrosion, 2015, 67(1), 60.
95 Wang Z, Jia M, Zhang X, et al. Journal of Alloys and Compounds, 2017, 698, 241.
96 Oguocha I, Adigun O, Yannacopoulos S. Journal of Materials Science, 2008, 43(12), 4208.
97 Birbilis N, Zhang R, Knight S, et al. Corrosion, 2016, 72(2), 144.
98 Engler O, Kuhnke K, Krupp H, et al. Praktische Metallographie, 2020, 57(8), 545.
99 Wang Y, Pan Q, Peng H, et al. Journal of Materials Science and Engineering, 2012, 30(6), 913.
100 Jiang Jingyu, Lai Songbai, Lu Liying, et al. Manned Spaceflight, 2019(3), 411(in Chinese).
蒋靖宇, 赖松柏, 路丽英, 等. 载人航天, 2019(3), 411.
101 Gao Z, Li H, Lai Y, et al. Materials Science and Engineering A, 2013, 580(9), 92.
102 Pan D, Zhou S, Zhang Z, et al. Materials Science and Technology, 2017, 33(6), 751. |
|
|
|
渝公网安备50019002502923号 © Editorial Office of Materials Reports.
2023, Vol. 37 
